Form 8-K - Current report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 8-K

CURRENT REPORT

PURSUANT TO SECTION 13 or 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

Date of report (Date of earliest event reported): August 1, 2024

DRILLING TOOLS INTERNATIONAL CORPORATION

(Exact name of registrant as specified in its charter)

Delaware

001-41103

87-2488708

(State or other jurisdiction

of Incorporation)

(Commission

file number)

(I.R.S. Employer

Identification No.)

3701 Briarpark Drive

Suite 150

Houston, Texas 77042

(Address of principal executive offices, zip code)

Registrant’s telephone number, including area code: (832) 742-8500

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:

☐

Written communication pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

☐

Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

☐

Pre-commencement communication pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

☐

Pre-commencement communication pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act:

Title of each class

Trading

Symbol(s)

Name of each exchange

on which registered

Common Stock, par value $0.0001 per share

DTI

The Nasdaq Stock Market LLC

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).

Emerging growth company ☒

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Item 2.01

Completion of Acquisition or Disposition of Assets

As previously announced, on March 6, 2024, Drilling Tools International Corporation (“DTI” or the “Company”), Superior Drilling Products, Inc., a Utah corporation (“SDPI”), DTI Merger Sub I, Inc., a Delaware corporation and direct wholly owned subsidiary of DTI (“Merger Sub I”), and DTI Merger Sub II, LLC, a Delaware limited liability company and direct wholly owned subsidiary of DTI (“Merger Sub II”), entered into an Agreement and Plan of Merger (the “Merger Agreement”) pursuant to which, among other things, and upon the terms and subject to the conditions set forth in the Merger Agreement, (a) Merger Sub I will merge with and into SDPI (the “First Merger”), with SDPI surviving as a wholly owned subsidiary of DTI, and (b) upon the effective time of the First Merger (the “First Effective Time”), SDPI, as the surviving corporation of the First Merger, will merge with and into Merger Sub II (the “Second Merger,” and, together with the First Merger, the “Merger”), with Merger Sub II surviving as a wholly owned subsidiary of DTI.

On August 1, 2024, the parties to the Merger Agreement completed the Merger. Pursuant to the Merger Agreement, at the First Effective Time, each share of SDPI common stock, par value $0.001 per share (the “SDPI Common Stock”), issued and outstanding immediately prior to the First Effective Time was converted into the right to receive, without interest, at the election of the holder thereof, subject to the proration provisions of the Merger Agreement, (a) for each share of SDPI Common Stock with respect to which an election to receive cash had been made and not revoked or lost (a “Cash Election Share”), $1.00 in cash (the “Cash Election Consideration”), (b) for each share of SDPI Common Stock with respect to which an election to receive stock had been made and not revoked or lost (each, a “Stock Election Share”), 0.313 validly issued, fully paid, and non-assessable shares of common stock, par value $0.0001 per share (the “DTI Common Stock”), of DTI (the “Stock Election Consideration,” and together with the Cash Election Consideration, the “Merger Consideration”), and (c) for each share of SDPI Common Stock with respect to which no election to receive Cash Election Consideration or the Stock Election Consideration had been made (a “No Election Share”), the Cash Election Consideration or the Stock Election Consideration, as provided in the proration mechanics described below.

Pursuant to the terms of the Merger Agreement, (a) if the product obtained by multiplying the aggregate number of Stock Election Shares by 0.313 (the “Stock Election Multiplier” and such product, the “Aggregate Stock Elections”) exceeded 4,845,240 (the “Maximum Share Amount”), (i) all Cash Election Shares and No Election Shares were to be exchanged for the Cash Election Consideration, and (ii) a portion of the Stock Election Shares of each holder thereof was to be exchanged for the Stock Election Consideration, with such portion being equal to the product obtained by multiplying the number of such holder’s Stock Election Shares by a fraction, the numerator of which is the Maximum Share Amount and the denominator of which is the Aggregate Stock Elections, with the remaining portion of such holder’s Stock Election Shares being exchanged for the Cash Election Consideration, (b) if the Aggregate Stock Elections was less than 4,112,752 (the “Minimum Share Amount” and the difference between the Minimum Share Amount and the Aggregate Stock Elections, the “Shortfall Amount”), then (i) first, if the Shortfall Amount is smaller than or equal to the number of No Election Shares multiplied by 0.313 (the “No Election Share Amount”), then: (A) the Cash Election Shares were to be received in cash as they have elected and will not be affected by the adjustment; and (B) the No Election Shares held by shareholders were to be exchanged for the Stock Election Consideration equal to the product of (1) the number of No Election Shares of such holder and (2) a fraction, the numerator of which is the Shortfall Amount and the denominator of which is the No Election Share Amount, with the remaining portion of such holder’s No Election Shares receiving the Cash Election Consideration, and (ii) second, if the Shortfall Amount exceeded the No Election Share Amount, then (Y) all No Election Shares were to be exchanged for the Stock Election Consideration and (Z) the Cash Election Shares held by stockholders were to be exchanged for the Stock Election Consideration, with such portion being equal to the product of (x) the number of Cash Election Shares of such holder and (y) a fraction, the numerator of which is the amount by which the Shortfall Amount exceeded the No Election Share Amount, and the denominator of which is the product of the aggregate number of Cash Election Shares and the Stock Election Multiplier, with the remaining portion of such holder’s Cash Election Shares receiving the Cash Election Consideration, and (iii) if the Aggregate Stock Elections is (x) equal to the Maximum Share Amount, (y) less than the Maximum Share Amount but greater than the Minimum Share Amount, or (z) equal to the Minimum Share Amount, then (1) all Cash Election Shares and No Election Shares were to be exchanged for the Cash Election Consideration and (2) all Stock Election Shares will be exchanged for the Stock Election Consideration.

At 5:00 p.m. Eastern time on July 29, 2024 (the “Election Deadline”), no further elections by SDPI shareholders were accepted. The Merger Consideration election results were as follows:

•

Holders of approximately 80.5% of the outstanding shares of SDPI Common stock, or 24,464,146 shares, elected to receive the Stock Election Consideration;

•

Holders of approximately 5.3% of the outstanding shares of SDPI Common Stock, or 1,605,736 shares, elected to receive the Cash Election Consideration; and

•

Holders of approximately 14.2% of the outstanding shares of SDPI Common Stock, or 4,321,362 shares, made no election, and, as a result, received the Cash Election Consideration.

Because the Maximum Share Amount was exceeded, holders of SDPI Common Stock who elected to receive all Stock Election Consideration received a portion of their Merger Consideration in Cash Election Consideration.

In addition, at the First Effective Time, each option to purchase SDPI Common Stock (“SDPI Option”) held by an individual who, as of immediately after the First Effective Time, constituted an “employee” of DTI within the meaning of the Securities and Exchange Commission’s (“SEC”) Registration Statement on Form S-8, that was outstanding and

unexercised, whether vested or unvested, immediately prior to the First Effective Time (each, an “Assumed SDPI Option”), ceased to represent a right to acquire shares of SDPI Common Stock and was assumed by DTI and converted automatically into an option to purchase DTI Common Stock on the same terms and conditions (including applicable vesting, exercise, and expiration provisions) as applied to such Assumed SDPI Option immediately prior to the First Effective Time, except that (i) the number of shares of DTI Common Stock subject to each Assumed SDPI Option was determined by multiplying: (A) the number of shares of SDPI Common Stock subject to such Assumed SDPI Option immediately prior to the First Effective Time by (B) 0.313 (as adjusted as appropriate to reflect any stock splits, stock dividends, combinations, reorganizations, reclassifications, or similar events, the “Option Exchange Ratio”) and rounding such product down to the nearest whole share, (ii) the per share exercise price of each Assumed SDPI Option was determined by dividing: (A) the per share exercise price of the Assumed SDPI Option immediately prior to the First Effective Time by (B) the Option Exchange Ratio, and rounding such quotient up to the nearest whole cent, and (iii) the Assumed SDPI Option became fully vested immediately upon the First Effective Time.

Prior to the First Effective Time, SDPI accelerated each SDPI Option in full, and all shares of restricted stock and any other shares of SDPI Common Stock subject to vesting conditions based on continuing service, performed, or on both continuing service and performance (“SDPI Restricted Stock”) became fully vested and the restrictions with respect thereto lapsed (to the extent not otherwise previously vested in accordance with their terms) as of immediately prior to the First Effective Time.

Effective as of the First Effective Time, each SDPI Option that was not an Assumed SDPI Option and that was outstanding and unexercised immediately prior to the First Effective Time automatically, and without any action on the part of the holder thereof, was cancelled and converted into the right to receive an amount of cash, without interest, equal to the product obtained by multiplying (x) the number of shares of SDPI Common Stock subject to the SDPI Option and (y) the excess, if any, of (i) the Cash Election Consideration over (ii) the per share exercise price of such SDPI Option, less any applicable taxes and withholding; provided, however, that each such SDPI Option that was not an Assumed SDPI Option that had an exercise price per share that was greater than or equal to the Cash Election Consideration was cancelled at the First Effective Time for no consideration.

Pursuant to the Merger Agreement, DTI issued approximately 4,845,132 shares of DTI Common Stock and paid $14,910,868.58 in cash to holders of SDPI Common Stock as the aggregate Merger Consideration described above.

In connection with the consummation of the Merger, the NYSE American (the “NYSEA”) was notified that each outstanding share of SDPI Common Stock issued and outstanding immediately prior to the First Effective Time was converted into the right to receive the Merger Consideration, pursuant to and subject to the terms and conditions of the Merger Agreement. SDPI requested that the NYSEA file a notification of removal from listing on Form 25 with the SEC with respect to the delisting of the SDPI Common Stock from the NYSEA and to deregister the SDPI Common Stock under Section 12(b) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Shares of SDPI Common Stock were suspended from trading on NYSEA after the closing of trading on July 31, 2024.

The Merger Agreement is filed as Exhibit 2.1 to DTI’s Current Report on Form 8-K filed with the SEC on March 7, 2024, which agreement is incorporated herein by reference. The foregoing summary has been included to provide investors and security holders with information regarding the terms of the Merger Agreement and is qualified in its entirety by the terms and conditions of the Merger Agreement. It is not intended to provide any other factual information about DTI, SDPI, or their respective subsidiaries and affiliates.

Item 2.02

Results of Operations and Financial Condition

The information included in Item 7.01 of this Current Report on Form 8-K is incorporated herein by reference into this Item 2.02.

Item 7.01.

Regulation FD Disclosure.

On August 6, 2024, DTI issued a press release announcing the closing of the Merger and announcing the Company’s financial and operating results for its second quarter ended June 30, 2024. A copy of the press release is attached hereto as Exhibit 99.1 to this Current Report on Form 8-K and is incorporated into this Item 7.01 by reference.

Attached as Exhibit 99.2 to this Current Report on Form 8-K is an investor presentation that the Company plans to use for investor relations and other purposes.

The information provided in this report and the exhibits attached hereto shall not be deemed to be “filed” for purposes of the Securities Exchange Act of 1934 (the “Exchange Act”) or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, regardless of any general incorporation language in such filing.

Item 9.01

Financial Statements and Exhibits.

(a) Financial Statements of Businesses Acquired.

The audited consolidated balance sheets of SDPI as of December 31, 2023 and 2022 and the consolidated statements of operations, shareholders’ equity and cash flows for the years then ended, and the related notes and the Report of Independent Registered Public Accounting Firm, issued by Moss Adams LLP, dated March 15, 2024, relating to the consolidated financial statements of SDPI, are incorporated by reference as Exhibit 99.3 hereto and are incorporated by reference into this Item 9.01(a).

The unaudited condensed consolidated balance sheet of SDPI as of March 31, 2024 and the condensed consolidated statements of operations, shareholders’ equity and cash flows of SDPI for the period ended March 31, 2024, and the notes related thereto, are incorporated by reference as Exhibit 99.4 hereto and are incorporated by reference into this Item 9.01(a).

(b) Pro Forma Financial Information.

DTI intends to file pro forma financial information under cover of Form 8-K/A not later than 71 calendar days after the date that this Current Report on Form 8-K is required to be filed.

Item 9.01.

Financial Statements and Exhibits.

(d) Exhibits:


Exhibit No.		Description

23.1		Consent of Moss Adams LLP

99.1		Press release issued by Drilling Tools International Corporation on August 6, 2024

99.2		Investor Presentation (Fall 2024)

99.3		Audited consolidated balance sheets of Superior Drilling Products, Inc. as of December 31, 2023 and 2022 and the consolidated statements of operations, shareholders’ equity and cash flows for the years then ended, and the related notes (collectively referred to as the consolidated financial statements) and the Report of Independent Registered Public Accounting Firm, issued by Moss Adams LLP, dated March 15, 2024, relating to the consolidated financial statements of Superior Drilling Products, Inc. (incorporated by reference to Part II, Item 8 and Part IV, Item 15 of the Annual Report on Form 10-K of Superior Drilling Products, Inc. for the year ended December 31, 2023 (SEC File No. 001-36453) (the “2023 Form 10-K”)).

99.4		The unaudited condensed consolidated balance sheet of Superior Drilling Product, Inc. as of March 31, 2024, and the condensed consolidated statements of operations, shareholders’ equity, and cash flows of Superior Drilling Products, Inc., for the period ended March 31, 2024 and the notes related thereto (incorporated by reference to Part I, Item 1 of the Quarterly Report on Form 10-Q of Superior Drilling Products, Inc. for the quarter ended March 31, 2024 (SEC File No. 001-36453).

104		Cover Page Interactive Data File (embedded within the Inline XBRL document).

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


	DRILLING TOOLS INTERNATIONAL CORPORATION

	By:	/s/ R. Wayne Prejean R. Wayne Prejean Chief Executive Officer
Date: August 6, 2024

Exhibit 23.1

Consent of Independent Registered Public Accounting Firm

We consent to the incorporation by reference in the Registration Statements on Form S-8 of Drilling Tools International Corporation (No. 333-281162, No. 333-280133 and No. 333-274242), of our report dated March 15, 2024, relating to the consolidated financial statements of Superior Drilling Products, Inc. (the “Company”), appearing in the Annual Report on Form 10-K of the Company for the year ended December 31, 2023, filed with the Securities and Exchange Commission, and incorporated by reference in this Current Report on Form 8-K of Drilling Tools International Corporation.

/s/ Moss Adams LLP

Dallas, Texas

August 6, 2024

Exhibit 99.1


		*NEWS RELEASE*

Drilling Tools International Corp. Closes on

Acquisition of Superior Drilling Products, Inc.;

Company Reports 2024 Second Quarter Results

Updates 2024 Guidance and Maintains Adjusted Free Cash Flow Outlook

HOUSTON — August 6, 2024 — Drilling Tools International Corp., (NASDAQ: DTI) (“DTI” or the “Company”), a global oilfield services company that designs, engineers, manufactures and provides a differentiated, rental-focused offering of tools for use in onshore and offshore drilling operations, as well as other cutting-edge solutions across the well life cycle, today announced that it has closed on its acquisition of Superior Drilling Products, Inc. (“SDP”) for total consideration paid in cash and DTI stock of approximately $32.2 million per the merger agreement, subject to purchase price accounting adjustments. DTI also reported today its 2024 second quarter results.

Wayne Prejean, CEO of DTI, stated, “We are pleased to announce the closing of the SDP acquisition and are excited to welcome SDP’s talented team to the DTI family and add SDP’s world-class manufacturing expertise into our broad-reaching and expanding global sales channels. This acquisition furthers DTI’s growth strategy as a premier provider of technologically differentiated solutions and services for the global oil & gas drilling industry. Directly integrating SDP’s patented Drill-N-Ream^® (“DNR”) well bore conditioning tool into DTI’s vast fleet of tools and technologies provides expanded geographic market potential, lowers our capital requirements and operating costs, and improves operational efficiencies across our portfolio of capabilities. SDP’s unique offering of proprietary diamond process expertise, sophisticated manufacturing capabilities, and their recently established Middle East footprint will greatly benefit DTI’s technology focused product and service offering on a global scale.”

Prejean added, “We expect to benefit from significant synergies over the next twelve months from this acquisition and have identified more than $4.5 million of SG&A synergies and realizable NOL tax benefits. In addition, there are vertical and horizontal integration synergies that include approximately 60% CapEx savings on new DNR tools and a 45% Repair & Maintenance margin capture. I would also like to highlight that in addition to the Vernal, Utah SDP bit repair, manufacturing, and technology center, we gained a fully operational bit repair facility in the UAE and several hundred fit-for-purpose DNR tools on the ground in the Middle East which gives us fuel in the tank to serve our clients in the region. We also gained an approximately $6.6 million receivable from the selling party to extinguish an existing Note which will accrue to DTI’s benefit, effectively reducing the overall transaction amount.”

2024 Second Quarter Results

Total revenue was $37.5 million, relatively flat compared to last year’s second quarter. Tool Rental net revenue was $28.3 million and Product Sales net revenue totaled $9.2 million in the second quarter of 2024. Operating expenses were $35.3 million, operating income was $2.2 million and Adjusted EBITDA(1) was $9.0 million in the second quarter of 2024. Adjusted free cash flow(1)(2) significantly improved by $3.2 million from ($4.3) million in last year’s second quarter to ($1.1) million in this year’s quarter.

“Turning to our 2024 second quarter operational results, the U.S. rig count experienced continued softness that led to a decline in the quarter compared to our flat rig count outlook earlier this year. In response, we have implemented a cost reduction program for an annualized savings of $2.4 million. We will continue to appropriately scale our operations to adjust for the activity levels in North America but will continue with our growth initiatives in other markets where growth opportunities are available. Additionally, we were able to manage capital expenditures and improve our Adjusted Free Cash Flow by $3.2 million over last year’s second quarter. Because of this unique lever at our disposal to generate returns despite a decline in North American land activity, we are maintaining our Adjusted Free Cash Flow guidance range of $20 million—$25 million for the full year,” concluded Prejean.

Updated 2024 Full Year Outlook


Revenue	$155 million	-	$170 million
Adjusted Net Income⁽¹⁾	$9.9 million	-	$13.5 million
Adjusted EBITDA⁽¹⁾	$41 million	-	$47 million
Adjusted EBITDA Margin⁽¹⁾	26%	-	28%
Adjusted Free Cash Flow⁽¹⁾⁽²⁾	$20 million	-	$25 million

(1)

Adjusted Net Income, Adjusted EBITDA, Adjusted EBITDA Margin, and Adjusted Free Cash Flow are non-GAAP financial measures. See “Non-GAAP Financial Measures” at the end of this release for a discussion of reconciliations to the most directly comparable financial measures calculated and presented in accordance with U.S. generally accepted accounting principles (“GAAP”).

(2)

Adjusted Free Cash Flow defined as Adjusted EBITDA less Gross Capital Expenditures.

Conference Call Information

DTI will hold a conference call today to discuss the SDP acquisition and second quarter results, which can be accessed live via dial-in or webcast on Tuesday, August 6, 2024 at 9:00 a.m. Eastern Time (8:00 a.m. Central Time). Please dial 1-862-298-0702 and ask for the DTI call at least 10 minutes prior to the start time, or listen to the live webcast by logging onto: https://investors.drillingtools.com/news-events/events. An audio replay will be available through August 13th by dialing 1-201-612-7415 and using passcode 13748086#. Also, an archive of the webcast will be available shortly after the call at https://investors.drillingtools.com/news-events/events for 90 days. Please submit any questions for management prior to the call via email to DTI@dennardlascar.com.

About Drilling Tools International Corp.

DTI is a Houston, Texas based leading oilfield services company that manufactures and rents downhole drilling tools used in horizontal and directional drilling of oil and natural gas wells. With roots dating back to 1984, DTI now operates from 16 service and support centers across North America and maintains 10 international service and support centers across the EMEA and APAC regions. To learn more about DTI, please visit: www.drillingtools.com.

Contact:

DTI Investor Relations

Ken Dennard / Rick Black

InvestorRelations@drillingtools.com

Forward-Looking Statements

This press release may include, and oral statements made from time to time by representatives of the Company may include, “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Statements other than statements of historical fact included in this press release are forward-looking statements. The words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intends,” “may,” “might,” “plan,” “possible,” “potential,” “predict,” “project,” “should,” “will,” “would” and similar expressions may identify forward-looking statements, but the absence of these words does not mean that a statement is not forward looking. These forward-looking statements include, but are not limited to, statements regarding DTI and its management team’s expectations, hopes, beliefs, intentions or strategies regarding the future. In addition, any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. Forward looking statements in this press release may include, for example, statements about: (1) the demand for DTI’s products and services, which is influenced by the general level activity in the oil and gas industry; (2) DTI’s ability to retain

its customers, particularly those that contribute to a large portion of its revenue; (3) DTI’s ability to employ and retain a sufficient number of skilled and qualified workers, including its key personnel; (4) DTI’s ability to source tools and raw materials at a reasonable cost; (5) DTI’s ability to market its services in a competitive industry; (6) DTI’s ability to execute, integrate and realize the benefits of acquisitions, and manage the resulting growth of its business; (7) potential liability for claims arising from damage or harm caused by the operation of DTI’s tools, or otherwise arising from the dangerous activities that are inherent in the oil and gas industry; (8) DTI’s ability to obtain additional capital; (9) potential political, regulatory, economic and social disruptions in the countries in which DTI conducts business, including changes in tax laws or tax rates; (10) DTI’s dependence on its information technology systems, in particular Customer Order Management Portal and Support System, for the efficient operation of DTI’s business; (11) DTI’s ability to comply with applicable laws, regulations and rules, including those related to the environment, greenhouse gases and climate change; (12) DTI’s ability to maintain an effective system of disclosure controls and internal control over financial reporting; (13) the potential for volatility in the market price of DTI’s common stock; (14) the impact of increased legal, accounting, administrative and other costs incurred as a public company, including the impact of possible shareholder litigation; (15) the potential for issuance of additional shares of DTI’s common stock or other equity securities; (16) DTI’s ability to maintain the listing of its common stock on Nasdaq; (17) the ability of DTI to realize the benefits of the acquisition of SDPI; and (18) other risks and uncertainties separately provided to you and indicated from time to time described in filings and potential filings by DTI with the Securities and Exchange Commission (the “SEC”). You should carefully consider the risks and uncertainties described in DTI’s annual report on Form 10-K filed March 29, 2024 (the “10-K”). Such forward-looking statements are based on the beliefs of management of DTI, as well as assumptions made by, and information currently available to DTI’s management. Actual results could differ materially from those contemplated by the forward-looking statements as a result of certain factors detailed in the 10-K. All subsequent written or oral forward-looking statements attributable to the Company or persons acting on its behalf are qualified in their entirety by this paragraph. Forward-looking statements are subject to numerous conditions, many of which are beyond the control of each of DTI, including those set forth in the Risk Factors section of the 10-K. The Company undertakes no obligation to update these statements for revisions or changes after the date of this release, except as required by law.

Tables to Follow

Drilling Tools International Corp.

Consolidated Statement of Operations and Comprehensive Income

(In thousands of U.S. dollars and rounded)

(Unaudited)


	Three Months Ended June 30,						Six Months Ended June 30,
	2024			2023			2024			2023
Revenue, net:
Tool rental	$	28,328		$	29,002		$	58,294		$	61,278
Product sale		9,205			8,906			16,213			17,429

Total revenue, net		37,533			37,908			74,507			78,707
Operating costs and expenses:
Cost of tool rental revenue		7,454			7,692			14,455			15,829
Cost of product sale revenue		2,544			1,157			4,080			2,460
Selling, general, and administrative expense		19,619			17,718			37,560			34,447
Depreciation and amortization expense		5,681			4,717			11,047			9,732

Total operating costs and expenses		35,298			31,284			67,142			62,468

Income (loss) from operations		2,235			6,624			7,365			16,239
Other expense, net:
Interest expense, net		(811	)		(348	)		(992	)		(922	)
Gain (loss) on sale of property		51			(1	)		42			68
Unrealized gain on equity securities		480			420			729			387
Other income (expense), net		(1,672	)		(4,382	)		(2,798	)		(6,035	)

Total other expense, net		(1,952	)		(4,311	)		(3,019	)		(6,502	)

Income before income tax expense		283			2,313			4,346			9,737
Income tax (expense)/benefit		82			(1,376	)		(854	)		(3,099	)

Net income	$	365		$	937		$	3,492		$	6,638
Accumulated dividends on redeemable convertible preferred stock		—			—			—			314

Net income available to common shareholders	$	365		$	937		$	3,492		$	6,324

Basic earnings per share	$	0.01		$	0.07		$	0.12		$	0.49

Diluted earnings per share	$	0.01		$	0.05		$	0.12		$	0.33

Basic weighted-average common shares outstanding*		29,816,202			13,910,670			29,792,385			12,936,310
Diluted weighted-average common shares outstanding*		30,873,436			20,746,976			30,321,002			20,217,648

Comprehensive income:
Net income	$	365		$	937		$	3,492		$	6,638
Foreign currency translation adjustment, net of tax		102			(207	)		(408	)		(207	)

Net comprehensive income	$	467		$	730		$	3,084		$	6,431

*	Shares of legacy redeemable convertible preferred stock and legacy common stock have been retroactively restated to give effect to the Merger.

Drilling Tools International Corp.

Consolidated Balance Sheets

(In thousands of U.S. dollars and rounded)

(Unaudited)


	June 30,			December 31,
	2024			2023
ASSETS
Current assets
Cash	$	6,784		$	6,003
Accounts receivable, net		35,122			29,929
Inventories, net		14,609			5,034
Prepaid expenses and other current assets		2,702			4,553
Investments - equity securities, at fair value		1,617			888

Total current assets		60,834			46,408
Property, plant and equipment, net		71,223			65,800
Operating lease right-of-use asset		21,827			18,786
Goodwill		7,962			—
Intangible assets, net		3,076			216
Deferred financing costs, net		991			409
Deposits and other long-term assets		961			879

Total assets	$	166,874		$	132,498

LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities
Accounts payable	$	14,014		$	7,751
Accrued expenses and other current liabilities		7,719			10,579
Current portion of operating lease liabilities		4,133			3,958
Current maturities of long-term debt		5,000			—

Total current liabilities		30,866			22,288
Operating lease liabilities, less current portion		17,814			14,893
Long-term debt		19,167			—
Deferred tax liabilities, net		6,227			6,627

Total liabilities		74,074			43,808
Commitments and contingencies
Shareholders’ equity
Common stock, $0.0001 par value, shares authorized 500,000,000 as of June 30, 2024 and December 31, 2023, 29,859,564 shares issued and outstanding as of June 30, 2024 and 29,768,568 shares issued and outstanding as of December 31, 2023		3			3
Additional paid-in-capital		96,536			95,218
Accumulated deficit		(3,105	)		(6,306	)
Accumulated other comprehensive loss		(634	)		(225	)

Total shareholders’ equity		92,800			88,690

Total liabilities and shareholders’ equity	$	166,874		$	132,498

Drilling Tools International Corp.

Consolidated Statement of Cash Flows

(In thousands of U.S. dollars and rounded)

(Unaudited)


	Six Months Ended June 30,
	2024			2023
Cash flows from operating activities:
Net income	$	3,492		$	6,638
Adjustments to reconcile net income to net cash from operating activities:
Depreciation and amortization		11,047			9,732
Amortization of deferred financing costs		139			37
Non-cash lease expense		2,315			2,275
Provision for excess and obsolete inventory		—			19
Provision for excess and obsolete property and equipment		179			238
Provision for credit losses		(16	)		418
Deferred tax expense		(400	)		2,008
Gain on sale of property		(51	)		(68	)
Loss on asset disposal		9			—
Unrealized loss on interest rate swap		—			91
Unrealized gain on equity securities		(729	)		(387	)
Gross profit from sale of lost-in-hole equipment		(4,987	)		(9,146	)
Stock-based compensation expense		1064			3986
Changes in operating assets and liabilities:
Accounts receivable, net		(1,449	)		(1,777	)
Prepaid expenses and other current assets		1,958			(1,531	)
Inventories, net		(49	)		1,409
Operating lease liabilities		(2,226	)		(2,179	)
Accounts payable		(2,158	)		1,982
Accrued expenses and other current liabilities		(3,745	)		316

Net cash flows from operating activities		4,391			14,061

Cash flows from investing activities:
Acquisition of a business, net of cash aquired		(18,261	)		—
Proceeds from sale of property and equipment		59			126
Purchase of property, plant and equipment		(16,312	)		(24,617	)
Proceeds from sale of lost-in-hole equipment		7,786			11,103

Net cash from investing activities		(26,728	)		(13,388	)

Cash flows from financing activities:
Proceeds from Merger and PIPE Financing, net of transaction costs		—			23,162
Payment of deferred financing costs		(672	)		(281	)
Proceeds from revolving line of credit		1,469			71,646
Payments on revolving line of credit		(1,469	)		(89,995	)
Proceeds from Term Loan		25,000			—
Repayment of Term Loan		(833	)		—
Payments to holders of DTIH redeemable convertible preferred stock in connection with retiring		—			(194	)

Net cash from financing activities		23,495			4,338

Effect of Changes in Foreign Exchange Rate		(377	)		(207	)
Net Change in Cash		781			4,804
Cash at Beginning of Period		6,003			2,352

Cash at End of Period	$	6,784		$	7,156

Supplemental cash flow information:
Cash paid for interest	$	660		$	851

Cash paid for income taxes	$	256		$	2,139

Non-cash investing and financing activities:
Fair value of CTG liabilities assumed in CTG Acquisition	$	3,162		$	—

ROU assets obtained in exchange for operating lease liabilities	$	5,054		$	2,635

Net exercise of stock options	$	255		$	—

Shares withheld from exercise of stock options for payment of taxes	$	35		$	—

Purchases of inventory included in accounts payable and accrued expenses and other current	$	5,082		$	4,076

Purchases of property and equipment included in accounts payable and accrued expenses and other	$	1,402		$	7,640

Deferred financing fees included in accounts payable	$	49		$	2

Non-cash directors and officers insurance	$	—		$	1,472

Non-cash Merger financing	$	—		$	2,000

Exchange of DTIH redeemable convertible preferred stock for DTIC Common Stock in connection	$	—		$	7,193

Issuance of DTIC Common Stock to former holders of DTIH redeemable convertible preferred stock in connection with Exchange Agreements	$	—		$	10,805

Accretion of redeemable convertible preferred stock to redemption value	$	—		$	314

Non-GAAP Financial Measures

This release includes Adjusted EBITDA, Adjusted Free Cash Flow and Adjusted Net Income measures. Each of the metrics are “non-GAAP financial measures” as defined in Regulation G of the Securities Exchange Act of 1934.

Adjusted EBITDA is a supplemental non-GAAP financial measure that is used by management and external users of our financial statements, such as industry analysts, investors, lenders and rating agencies. Adjusted EBITDA is not a measure of net earnings or cash flows as determined by GAAP. We define Adjusted EBITDA as net earnings (loss) before interest, taxes, depreciation and amortization, further adjusted for (i) goodwill and/or long-lived asset impairment charges, (ii) stock-based compensation expense, (iii) restructuring charges, (iv) transaction and integration costs related to acquisitions and (v) other expenses or charges to exclude certain items that we believe are not reflective of ongoing performance of our business.

We believe Adjusted EBITDA is useful because it allows us to supplement the GAAP measures in order to more effectively evaluate our operating performance and compare the results of our operations from period to period without regard to our financing methods or capital structure. We exclude the items listed above in arriving at Adjusted EBITDA because these amounts can vary substantially from company to company within our industry depending upon accounting methods and book values of assets, capital structures and the method by which the assets were acquired. Adjusted EBITDA should not be considered as an alternative to, or more meaningful than, net income as determined in accordance with GAAP, or as an indicator of our operating performance or liquidity. Certain items excluded from Adjusted EBITDA are significant components in understanding and assessing a company’s financial performance, such as a company’s cost of capital and tax structure, as well as the historic costs of depreciable assets, none of which are components of Adjusted EBITDA. Our computations of Adjusted EBITDA may not be comparable to other similarly titled measures of other companies.

Adjusted Free Cash Flow is a supplemental non-GAAP financial measure, and we define Adjusted Free Cash Flow as Adjusted EBITDA less Gross Capital Expenditures. We use Adjusted Free Cash Flow as a financial performance measure used for planning, forecasting, and evaluating our performance. We believe that Adjusted Free Cash Flow is useful to enable investors and others to perform comparisons of current and historical performance of the Company. As a performance measure, rather than a liquidity measure, the most closely comparable GAAP measure is net income (loss).

We define Adjusted Net Income (Loss) as consolidated net income (loss) adjusted for (i) goodwill and/or long-lived asset impairment charges, (ii) restructuring charges, (iii) transaction and integration costs related to acquisitions and (iv) other expenses or charges to exclude certain items that we believe are not reflective of the ongoing performance of our business. We believe Adjusted Net Income (Loss) is useful because it allows us to exclude non-recurring items in evaluating our operating performance.

We define Adjusted Diluted Earnings (Loss) per share as the quotient of adjusted net income (loss) and diluted weighted average common shares. We believe that Adjusted Diluted Earnings (Loss) per share provides useful information to investors because it allows us to exclude non-recurring items in evaluating our operating performance on a diluted per share basis.

The following tables present a reconciliation of the non-GAAP financial measures of Adjusted EBITDA, Adjusted Free Cash Flow and Adjusted Net Income to the most directly comparable GAAP financial measures for the periods indicated:

Drilling Tools International Corp.

Reconcilation of GAAP to Non-GAAP Measures (Unaudited)

(In thousands of U.S. dollars and rounded)


	Three Months Ended June 30,
	2024			2023
Net income (loss)	$	365		$	937
Add (deduct):
Income tax expense		(82	)		1,376
Depreciation and amortization		5,681			4,717
Interest expense, net		811			348
Stock option expense		855			1,661
Management fees		187			262
Loss (gain) on sale of property		(51	)		1
Unrealized (gain) loss on equity securities		(480	)		(420	)
Transaction expense		2,020			4,142
Other expense, net		(341	)		241

Adjusted EBITDA	$	8,965		$	13,265


	Six Months Ended June 30,
	2024			2023
Net income (loss)	$	3,492		$	6,638
Add (deduct):
Income tax expense		854			3,099
Depreciation and amortization		11,047			9,732
Interest expense, net		992			922
Stock option expense		1,064			1,661
Management fees		375			478
Loss (gain) on sale of property		(42	)		(68	)
Unrealized (gain) loss on equity securities		(729	)		(387	)
Transaction expense		2,909			5,838
Other expense, net		(104	)		197

Adjusted EBITDA	$	19,858		$	28,110

Drilling Tools International Corp.

Reconcilation of GAAP to Non-GAAP Measures (Unaudited)

(In thousands of U.S. dollars and rounded)


	Three Months Ended June 30,
	2024			2023
Net income (loss)	$	365		$	937
Add (deduct):
Income tax expense		(82	)		1,376
Depreciation and amortization		5,681			4,717
Interest expense, net		811			348
Stock option expense		855			1,661
Management fees		187			262
Loss (gain) on sale of property		(51	)		1
Unrealized (gain) loss on equity securities		(480	)		(420	)
Transaction expense		2,020			4,142
Other expense, net		(341	)		241
Gross capital expenditures		(10,084	)		(17,550	)

Adjusted Free Cash Flow	$	(1,119	)	$	(4,285	)


	Six Months Ended June 30,
	2024			2023
Net income (loss)	$	3,492		$	6,638
Add (deduct):
Income tax expense		854			3,099
Depreciation and amortization		11,047			9,732
Interest expense, net		992			922
Stock option expense		1,064			1,661
Management fees		375			478
Loss (gain) on sale of property		(42	)		(68	)
Unrealized (gain) loss on equity securities		(729	)		(387	)
Transaction expense		2,909			5,838
Other expense, net		(104	)		197
Gross capital expenditures		(16,312	)		(24,617	)

Adjusted Free Cash Flow	$	3,545		$	3,493

Drilling Tools International Corp.

Reconcilation of GAAP to Non-GAAP Measures (Unaudited)

(In thousands of U.S. dollars and rounded)


	Three Months Ended June 30,
	2024			2023
Net income (loss)	$	365		$	937
Transaction expense		2,020			4,142
Income tax expense		(82	)		1,376
Adjusted Income Before Tax	$	2,303		$	6,455

Adjusted Income tax expense		(668	)		3,840
Adjusted Net Income	$	2,970		$	2,615

Accumulated dividends on redeemable convertible preferred stock		—			—

Adjusted Net income available to common shareholders	$	2,970		$	2,615
Adjusted Basic earnings per share		0.10			0.19
Adjusted Diluted earnings per share		0.10			0.13
Basic weighted-average common shares outstanding*		29,816,202			13,910,670
Basic weighted-average common shares outstanding*		30,873,436			20,746,976

	Six Months Ended June 30,
	2024			2023
Net income (loss)	$	3,492		$	6,638
Transaction expense		2,909			5,838
Income tax expense		854			3,099
Adjusted Income Before Tax	$	7,255		$	15,575

Adjusted Income tax expense		1,426			4,957
Adjusted Net Income	$	5,829		$	10,618

Accumulated dividends on redeemable convertible preferred stock		—			314
Adjusted Net income available to common shareholders	$	5,829		$	10,304

Adjusted Basic earnings per share		0.20			0.80
Adjusted Diluted earnings per share		0.19			0.53
Basic weighted-average common shares outstanding*		29,792,385			12,936,310
Basic weighted-average common shares outstanding*		30,321,002			20,217,648

Drilling Tools International Corp.

Reconciliation of Estimated Consolidated Net Income to Adjusted EBITDA

(In thousands of U.S. dollars and rounded)

(Unaudited)


	Twelve Months Ended December 31, 2024
	Low			High
Net Income	$	7,000		$	10,000
Add (deduct)
Interest expense, net		2,500			2,700
Income tax expense		2,500			2,800
Depreciation and amortization		22,500			23,500
Management fees		600			900
Other expense		(500	)		—
Stock option expense		2,400			2,600
Transaction expense		4,000			4,500

Adjusted EBITDA	$	41,000		$	47,000

Revenue		155,000			170,000

Adjusted EBITDA Margin		26	%		28	%

Drilling Tools International Corp.

Reconciliation of Estimated Consolidated Net Income to Adjusted Free Cash Flow

(In thousands of U.S. dollars and rounded)

(Unaudited)


	Twelve Months Ended December 31, 2024
	Low			High
Net Income	$	7,000		$	10,000
Add (deduct)
Interest expense, net		2,500			2,700
Income tax expense		2,500			2,800
Depreciation and amortization		22,500			23,500
Management fees		600			900
Other expense		(500	)		—
Stock option expense		2,400			2,600
Transaction expense		4,000			4,500
Gross capital expenditures		(21,000	)		(22,000	)

Adjusted Free Cash Flow	$	20,000		$	25,000

Drilling Tools International Corp.

Reconciliation of Estimated Consolidated Net Income to Adjusted Net Income

(In thousands of U.S. dollars and rounded)

(Unaudited)


	Twelve Months Ended December 31, 2024
	Low		High
Net income (loss)	$	7,000	$	10,000
Transaction expense	$	4,000	$	4,500
Income tax expense		2,500		2,800
Adjusted Income Before Tax	$	13,500	$	17,300

Adjusted Income tax expense		3,600		3,800
Adjusted Net Income	$	9,900	$	13,500

Exhibit 99.2 Investor Presentation Fall 2024 www.drillingtools.com

Forward Looking Statements General: Drilling Tools International Corporation (“DTI”) is making this presentation available in connection with the release of its financial results for the three months ended June 30, 2024. The information contained in this presentation does not purport to be all-inclusive or to contain all information that prospective investors may require. Prospective investors are encouraged to conduct their own analysis and review of information contained in this presentation as well as important additional information through the Securities and Exchange Commission’s (“SEC”) EDGAR system at www.sec.gov and on our website at www.drillingtools.com. Forward-Looking Statements: This presentation and the oral statements made in connection herewith include “forward-looking statements” within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. DTI’s actual results may differ from its expectations, estimates and projections, and, consequently, you should not rely on these forward-looking statements as predictions of future events. The words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intends,” “may,” “might,” “plan,” “possible,” “potential,” “predict,” “project,” “should,” “will,” “would” and similar expressions may identify forward-looking statements, but the absence of these words does not mean that a statement is not forward looking. These forward- looking statements include, but are not limited to, statements regarding DTI and its management team’s expectations, hopes, beliefs, intentions or strategies regarding the future. In addition, any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. Forward-looking statements in this presentation may include, for example, statements about: (1) the demand for DTI’s products and services, which is influenced by the general level activity in the oil and gas industry; (2) DTI’s ability to retain its customers, particularly those that contribute to a large portion of its revenue; (3) DTI’s ability to employ and retain a sufficient number of skilled and qualified workers, including its key personnel; (4) DTI’s ability to market its services in a competitive industry; (5) DTI’s ability to execute, integrate and realize the benefits of acquisitions, and manage the resulting growth of its business; (6) potential liability for claims arising from damage or harm caused by the operation of DTI’s tools, or otherwise arising from the dangerous activities that are inherent in the oil and gas industry; (7) DTI’s ability to obtain additional capital; (8) potential political, regulatory, economic and social disruptions in the countries in which DTI conducts business, including changes in tax laws or tax rates; (9) DTI’s dependence on its information technology systems, in particular Customer Order Management Portal and Support System, for the efficient operation of DTI’s business; (10) DTI’s ability to comply with applicable laws, regulations and rules, including those related to the environment, greenhouse gases and climate change; (11) DTI’s ability to maintain an effective system of disclosure controls and internal control over financial reporting; (12) the potential for volatility in the market price of DTI’s common stock; (13) the impact of increased legal, accounting, administrative and other costs incurred as a public company, including the impact of possible shareholder litigation; (14) the potential for issuance of additional shares of DTI’s common stock or other equity securities; (15) DTI’s ability to maintain the listing of its common stock on Nasdaq; and (16) other risks and uncertainties separately provided to you and indicated from time to time described in filings and potential filings by DTI with the SEC. These forward-looking statements are based on DTI management's current expectations and assumptions about future events and are based on currently available information as to the outcome and timing of future events. DTI cautions that the foregoing list of factors is not exclusive and not to place undue reliance upon any forward-looking statements, including projections, which speak only as of the date made. You should also carefully consider the risks and uncertainties described and the information presented in DTI’s current annual report on Form 10-K filed March 28, 2024 and in subsequent quarterly and annual reports filed with the SEC. These filings or potential filings may identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements referred hereto. DTI undertakes no obligation to and accepts no obligation to release publicly any updates or revisions to any forward-looking statements or to reflect any change in its expectations or any change in events, conditions or circumstances on which any such statement is based, except as required by law. Industry, Market Data and Partnerships: In this presentation, DTI relies on and refers to certain information and statistics regarding the markets and industries in which DTI competes. Such information and statistics are based on management’s estimates and/or obtained from third-party sources, including reports by market research firms and company filings. While DTI believes such third-party information is reliable, there can be no assurance as to the accuracy or completeness of the indicated information. DTI has not independently verified the accuracy or completeness of the information provided by the third-party sources. This presentation contains descriptions of certain key business partnerships of DTI. These descriptions are based on DTI’s management team’s discussion with such counterparties, certain non-binding written agreements and the latest available information and estimates as of the date of this presentation. Use of Projections: This presentation contains projected financial information with respect to DTI. Such projected financial information constitutes forward-looking information, is for illustrative purposes only and should not be relied upon as necessarily being indicative of future results. Further, illustrative presentations are not necessarily based on management’s projections, estimates, expectations or targets but are presented for illustrative purposes only. DTI’s independent auditors have not audited, reviewed, compiled or performed any procedures with respect to the projections for the purpose of their inclusion in this presentation, and, accordingly, they did not express an opinion or provide any other form of assurance with respect thereto for the purpose of this presentation. The assumptions and estimates underlying such financial forecast information are inherently uncertain and are subject to a wide variety of significant business, economic, competitive and other risks and uncertainties. See “Forward-Looking Statements” above. Actual results may differ materially from the results contemplated by the financial forecast information contained in this presentation, and the inclusion of such information in this presentation is not intended, and should not be regarded, as a representation by any person that the results reflected in such forecasts will be achieved. Further, the metrics referenced in this presentation regarding select aspects of DTI’s operations were selected by DTI on a subjective basis. Such metrics are provided solely for illustrative purposes to demonstrate elements of DTI’s business, are incomplete and are not necessarily indicative of DTI’s performance or future performance or overall operations. There can be no assurance that historical trends will continue. Any investment in DTI’s common stock entails a high degree of risk. No assurance can be given that investors will receive a return on their capital, and investors could lose part or all of their investment. Non-GAAP Financial Measures: This presentation includes certain financial measures not presented in accordance with generally accepted accounting principles (“GAAP”), including, but not limited to: Adjusted EBITDA, Adjusted Free Cash Flow, and certain ratios and other metrics derived therefrom. Note that other companies may calculate these non-GAAP financial measures differently, and, therefore, such financial measures may not be directly comparable to similarly titled measures of other companies. Further, these non-GAAP financial measures are not measures of financial performance in accordance with GAAP and may exclude items that are significant in understanding and assessing DTI’s financial results. Therefore, these measures should not be considered in isolation or as an alternative to net income (loss), net cash (used in) provided by operating activities or other measures of profitability, liquidity or performance under GAAP. You should be aware that DTI’s presentation of these measures may not be comparable to similarly titled measures used by other companies. DTI believes these non-GAAP measures provide useful information to management and investors regarding certain financial and business trends relating to DTI’s results of operations. DTI believes that the use of these non-GAAP financial measures provides an additional tool for investors to use in evaluating ongoing operating results and trends in DTI, and in comparing DTI’s financial measures with those of other similar companies, many of which present similar non-GAAP financial measures to investors. These non-GAAP financial measures are subject to inherent limitations as they reflect the exercise of judgment by management about which items of expense and income are excluded or included in determining these non-GAAP financial measures. Please refer to footnotes where presented on each page of this presentation or to the tables herein for a reconciliation of these measures to what DTI believes are the most directly comparable measure evaluated in accordance with GAAP. Reconciliation of historical non-GAAP measures to comparable GAAP measures are provided in the Appendix. This presentation also includes certain projections of non-GAAP financial measures. Reconciliation of these items to net income include gains or losses on sale or consolidation transactions, accelerated depreciation, impairment charges, gains or losses on retirement of debt, variations in effective tax rate and fluctuations in net working capital, which are difficult to predict and estimate and are primarily dependent on future events. Rounding: Certain monetary amounts, percentages and other figures included in this presentation have been subject to rounding adjustments. Certain other amounts that appear in this presentation may not sum due to rounding. Trademarks: This presentation contains trademarks, service marks, trade names and copyrights of DTI and other companies, which are the property of their respective owners. Solely for convenience, some of the trademarks, service marks, trade names and copyrights referred to in this presentation may be listed without the TM, SM, © or ® symbols, but DTI will assert, to the fullest extent under applicable law, the rights of the applicable owners, if any, to these trademarks, service marks, trade names and copyrights. Further, third-party logos included in this presentation may represent past or present vendors or suppliers of materials and/or products to DTI for use in connection with its business or may be provided simply for illustrative purposes only. Inclusion of such logos does not necessarily imply affiliation with or endorsement by such firms or businesses. There is no guarantee that DTI will work, or continue to work, with any of the firms or businesses whose logos are included herein in the future. 1

DTI is a Leading Rental Provider of Mission Critical Drilling Tools A platform developed and designed to keep up with ever-changing customer needs ~65,000+ Global ~40 years 6 Product Lines DTI manages & DTI has sales and DTI’s history began in DTI’s differentiated maintains a fleet of distribution channels 1984 with the founding product lines include approximately 65,000 across North America, of Directional Rentals, Directional Tool Rentals, rental tools and EMEA and APAC regions an equipment provider Wellbore Optimization drilling equipment to offshore drillers Tools, Premium Tools, Deep Casing Tools, PDC Tool Repair and Other Products Broad Footprint Permian 35,840 SF $152 Million DTI operates from 16 service DTI has extensive DTI operates a 35,840 sq. ft. DTI’s 2023 revenue and support centers across operations across the manufacturing & repair reflects broad scope North America and maintains prolific Permian Basin facility in Louisiana and scale 10 international service and support centers 2

Significant Industry Tailwinds & Supportive Macro Backdrop A combination of commodity prices, rig count and capital spending creates a highly constructive market backdrop (1) (2) Historical Rig Count Industry Analysis North American Rest of World 2,500 Drilling Tools Market to Grow from $7.85 Billion in 2023 to $11.01 Billion by 2029. 2,000 1,500 Demand for High-Performance Drilling Tools Soars as Oil and Gas Companies Reshaping 1,000 the Market Expansion. 500 - Arizton Advisory and Intelligence 0 Dec-20 Jun-21 Dec-21 Jun-22 Dec-22 Jun-23 Dec-23 Jun-24 (3) (4) Historical Feet Drilled E&P Capital Spending ($ Billions) 35 30 25 20 15 10 5 0 1) Baker Hughes 2) Arizton Advisory and Intelligence 3 3) Spears Directional Drilling Market Report – Q2 2024. Only includes number of feet drilled through reservoir rock, excludes vertical part of well 4) Evercore ISI 2024 Global E&P Spending Outlook Millions of Feet Q1 2020 Q2 2020 Q3 2020 Q4 2020 Q1 2021 Q2 2021 Q3 2021 Q4 2021 Q1 2022 Q2 2022 Q3 2022 Q4 2022 Q1 2023 Q2 2023 Q3 2023 Q4 2023 Q1 2024 Q2 2024 Q3 2024 Q4 2024 Q1 2025 Q2 2025 Q3 2025 Q4 2025

2024 Financial Outlook Delivering Adjusted Free Cash Flow Throughout The Cycle DTI continues to execute its M&A strategy with ~5 near-term priority targets identified ✓ DTI expects continued declines in the North American rig count throughout 2024, after a 20% decline in 2023 ✓ FY 2024 guidance includes estimated contributions from Deep Casing Tools and Superior Drilling Products Key Guidance Summary FY 2024 Guidance ($ thousands) Revenue $155,000 - $170,000 (1) Adjusted EBITDA $41,000 - $47,000 (1) Adjusted Net Income $9,900 - $13,500 (1)(2) Adjusted Free Cash Flow $20,000 - $25,000 1) Adjusted EBITDA, Adjusted Net Income and Adjusted Free Cash Flow are non-GAAP financial measures. See “Non-GAAP Financial Measures” in the appendix for reconciliations to the most directly comparable financial measures calculated and presented in accordance with U.S. generally accepted accounting principles (“GAAP”). 4 2) Adjusted Free Cash Flow defined as Adjusted EBITDA less Gross Capital Expenditures

Sustainable Growth – Executing on Plan (1) Revenue Adjusted EBITDA ($ in millions) ($ in millions) $155.0 - $170.0 $51.0 $41.0 - $47.0 $152.0 $41.2 $129.6 (2) (2) 2022 2023 2024E 2022 2023 2024E (1) (1) Adjusted Net Income Adjusted Free Cash Flow ($ in millions) ($ in millions) $21.1 $20.0 - $25.0 $19.2 $9.9 - $13.5 $16.5 $7.3 (2) (2) 2022 2023 2024E 2022 2023 2024E 1) Adjusted EBITDA, Adjusted Net Income and Adjusted Free Cash Flow are non-GAAP financial measures. See “Non-GAAP Financial Measures” in the appendix for reconciliations to the most directly comparable financial measures calculated and presented in accordance with U.S. generally accepted accounting principles (“GAAP”). 5 2) 2024E represents the Company’s outlook as of August 6, 2024 as shown on page 4

Components of Adjusted EBITDA Increased Growth Capital spending in 2023 now supports stronger Adj. Free Cash Flow in 2024+ Commentary Smart Capital Expenditures ($ Millions) (1) Adj. Free Cash Flow can be directly influenced by Growth $7.3 CapEx strategy $16.5 $20.0 – $25.0 $24.1 Growth CapEx $3.6 is company funded and $9.0 - $11.0 increased as a percentage of revenue in $21.1 $19.7 2023 which supports $11.0 - $14.0 stronger 2024+ adj. free cash flow 2022 2023 2024E Maintenance CapEx Growth CapEx Adjusted Free Cash Flow Maintenance CapEx is funded by tool recovery 2022 2023 2024E revenue and is relatively (2) Maintenance CapEx % of Revenue 16% 13% ~7% steady-state as a (2) Growth CapEx % of Revenue 3% 16% ~5% percentage of total (1) revenue Adj. Free Cash Flow % of EBITDA 40% 14% 49%-53% Source: Company financials and management estimates. 2024E represents the Company’s outlook as of August 6, 2024 as shown on page 4 6 1) Adjusted Free Cash Flow defined as Adjusted EBITDA less Gross Capital Expenditures 2) Maintenance and Growth percentages for FY 2024 represents the current forecasted split as of August 6, 2024

(1) Peer Adj. Free Cash Flow Margin Comparisons (2) 2023 Actual 2024 Estimates 35% 35% 30% 30% 25% 25% 20% 20% 15% 15% 10% 10% 5% 5% 0% 0% Peer 1 Peer 2 Peer 3 Peer 4 Peer 5 Peer 6 Peer 7 DTI Peer 1 DTI Peer 2 Peer 3 Peer 4 Peer 5 Peer 6 Peer 7 Tool recovery revenue, also known as lost or damaged equipment charges, allows DTI to sustain its fleet, maintain relevant tools and technology, and generate positive adjusted free cash flow throughout industry cycles. Peer group includes BKR, BOOM, OIS, RES, RNGR, WHD, and XPRO 1) Adjusted Free Cash Flow Margin is defined as Adjusted EBITDA less Gross Capital Expenditures divided by Total Revenue 7 2) Uses midpoint of DTI's 2024 guidance and FY24 consensus estimates for peer group

Peer Leading Return on Capital Employed (ROCE) 2023 Actual 30% 25% 20% 15% 10% 5% 0% DTI Peer 1 Peer 2 Peer 3 Peer 4 Peer 5 Peer 6 Peer 7 EV/EBITDA 1.83x 10.19x 3.71x 2.94x 10.05x 6.33x 9.93x 6.47x Multiple ‒ Peer group includes BKR, BOOM, OIS, RES, RNGR, WHD, and XPRO ‒ ROCE is defined as EBIT divided by Capital Employed (Total Assets - Total Current Liabilities) 8 ‒ EV/EBITDA multiples based on the Enterprise Value as of 8/5/2024 and FY 2023 reported EBITDA

About Us 9

A Market Leader in Downhole Tools for the Oil & Gas Industry A highly competitive suite of differentiated products Core Product and Service Offering Directional Tools Rental Wellbore Optimization Tools Premium Tools 61% of 2023 Revenue 19% of 2023 Revenue 17% of 2023 Revenue TM ⚫ Rental tools used in bottom hole ⚫ Drill-N-Ream , a proprietary and ⚫ Offers tubulars for drilling, workover assemblies (“BHA”) adjacent to the patented wellbore conditioning tool and completion operations drill bit ⚫ Emerging products in 2024 will ⚫ Complete inventory of necessary TM ⚫ More than 30 categories of tools include RotoSteer handling tools for running workstrings ⚫ Blowout preventers and related pressure control accessories Market Leading Tool Rental Share of over 50% within North American land drilling rigs. A market leader in the deep-water Gulf of Mexico. Expanding geographic opportunities in International market. Note: Other Products and Services account for remaining 3% of 2023 Revenue 10

Presence Across All Major Basins in North America Expanding footprint in Europe, Middle East, North Africa & Asia Nisku, Alberta 64,000+ Tool Rental Fleet Williston, ND 6 Differentiated Product Lines Charleroi, PA Casper, WY Vernal, UT Global Services Footprint including Bakersfield, CA all Major US Basins Oklahoma City, OK Aberdeen, Scotland Midland & Carlsbad, NM Odessa, TX Celle, Germany 16 Service and Sibley, LA Support Centers in Houston, TX North America Broussard & Dubai, Mina Abdullah, Kuwait New Iberia, LA UAE Dammam, KSA Abu Dhabi, UAE Muscat, Oman DTI Corporate Headquarters 10 International DTI Service Centers Kuala Lumpur, Service and Support Malaysia Wellbore Optimization Tools Premium Tools Division Centers Stocking Points Inspection and Repair Production Products, Sales & Support Bassendean, W. Australia 1) In addition to the International locations depicted on the map above, DTI also maintains a presence in Brazil, China, Italy, and Nigeria 11

Blue-Chip Customer Base Across E&Ps & OFS Companies ✓ First-call supplier for leading oilfield service providers in North America ✓ DTI has actively expanded its customer base to further diversify its customer mix Select DTI Customers / / 12

Executing Our Strategic Plan & Delivering Improved Results DTI achievements since becoming a public company in June 2023 (1) Reported 2023 growth; 17% y/y Revenue & 24% y/y Adjusted EBITDA growth Acquired Superior Drilling Products, Inc. Acquired Deep Casing Tools Improved liquidity and strengthened the balance sheet by extending the ABL Credit Facility to $80 million from $60 million maturing in March 2029 New term loan of $25 million maturing in March 2029 Initiated 2024 Revenue & Adjusted Free Cash Flow Outlook that represents meaningful year-over-year improvement despite market softness and rig count declines (1) Adjusted Free Cash Flow expected to more than double in 2024 (1) Adjusted EBITDA and Adjusted Free Cash Flow are non-GAAP financial measures. See “Non-GAAP Financial Measures” in the appendix for reconciliations to the 13 most directly comparable financial measures calculated and presented in accordance with U.S. generally accepted accounting principles (“GAAP”).

Why Do Customers Rent Downhole Tools? Complex drilling, completions, and workover programs lead most operators and service providers to focus on core competencies while preferring to rely on third-parties for rental tool support. Operators prefer renting these tools to gain the benefits of: Outsources Logistics, Inspection, Storage & Maintenance Eliminates Equipment Redeployment Risk Immediate Equipment Availability Fill Equipment Supply Gaps Focus Capex On Core Operations Why rent from DTI? Our Rental Offering Provides Customer Efficiency & Value-Additive Solutions 14

Key Operational Differentiators Modern Manufacturing and Repair Facility ✓ Machine and repair equipment ensures product quality, increases product life and improves fleet utilization ✓ Ability to manufacture most of our rental tools enables cost reduction & control of supply chain Raw Materials From DTI Manufacturing & Tools Added and/or Repair Facilities Mill Returned to Fleet Tools Returned from Rental Proprietary COMPASS* Order Management System ✓ COMPASS provides valuable information to DTI for making data-based capital allocation decisions Unique, Proprietary Software Full Catalog of Tools Expedites Order Process and Support System and Equipment Effective Pricing Controls Transaction Data Analyzed for Customized, Automated, Provides Customers Centralized Strategic Fleet Management Accurate Reporting Order Management 15 * Customer Order Management Portal And Support System

Organic Growth Drivers ✓ DTI scale, leveraging global footprint of distribution and sales channel ✓ Expanding scope of tools & services in existing product lines through technological advancements ✓ Further customer penetration, growing rentals due to expanded capabilities, new tools and services ✓ Growing customer base and gaining market share ✓ Favorable trend of longer laterals being drilled TM TM TM Proprietary Examples: RotoSteer / Drill-N-Ream / SafeFloat 16

M&A Growth Strategy: Significant Consolidation Upside Established framework and robust pipeline to strategically consolidate the oilfield service rental tool industry Overview of DTI’s M&A Framework M&A Pipeline Large Fragmented Large universe of potential targets – primarily smaller, Large specialized regional companies & individual products Industry Universe of 500+ Potential Targets Leverage Existing DTI’s 325+ MSAs, many of which are with leading service companies and E&P operators, can accelerate growth Customer Relationships Leverage DTI’s Large Geographic presence in all major markets enables quick Current M&A 100+ deployment of DTI’s product / service suite Targets Facility Footprint Commercialize Platform and experienced team can quickly commercialize new technologies that otherwise have a limited path to market “Good Ideas” Active Targets in ~25 Create Drilling Strategic emphasis on products that reduce rig days per well Pipeline and therefore garner high rental rates Efficiencies Increase Product Continue expanding into higher value, more sophisticated Near-Term tools (e.g. enhanced extended reach wellbore technologies) Sophistication Priority ~5 Targets Identified Broaden International Continue to strategically review international markets and potential distribution partners Expansion 17

Strategic Rationale: Superior Drilling Products ✓ Enhances vertical integration of differentiated technology TM ✓ Cost savings on Drill-N-Ream tool ✓ Synergies - eliminates duplicative public company costs ✓ Adds significant precision manufacturing capacity ✓ Enhances horizontal opportunities ✓ Expands DTI’s intellectual property portfolio by over 10 patents ✓ Will own global rights to Drill-N-Ream tool ✓ Accelerate Drill-N-Ream growth opportunities world-wide ✓ Entrance into drill bit re-manufacture and repair business Superior Drilling Products merger closed on August 1, 2024 18

Strategic Rationale: Deep Casing Tools ✓ Adds to DTI’s technology platform ✓ Expands intellectual property portfolio by over 60 patents ✓ Adds strong international customer relationships ✓ ADNOC / ARAMCO / PEMEX / PETROBRAS / PETRONAS ✓ Accretive to DTI’s earnings and Adj. Free Cash Flow profile ✓ Opportunity to expand Deep Casing products into N. America 19 Deep Casing Tools merger closed on March 18, 2024

The DTI Leadership Team – Experience Matters! Experienced, talented, and committed management team with history of success 20

DTI’s Differentiated Growth Strategy Creates a Compelling Investment Profile A Market Leader in Downhole Tools for the Oil & Gas Industry Blue Chip Customers Strategic Model Delivering Through-Cycle Outperformance Proven Growth: Organic & M&A in Fragmented Industry Strong Balance Sheet / Low Leverage / Significant Free Cash Flow Experienced and Proven Leadership Team Sustainable Financial Growth Outlook 21

Supplemental Information 22

ESG + Safety Are Integral to Our Success DTI is committed to environmental stewardship ✓ Continuous evaluations and control measures to ensure minimization of waste ✓ Pursuing highest levels of operational proficiency to reduce rework, and use of chemicals and waste Environmental ✓ Actively promoting recycling including extensive rental tool recycling and refurbishment programs & opportunities to redeploy equipment for energy transition markets such as geothermal, carbon capture and storage ✓ Identify and control exposures to limit potential injury and production interruptions or damages Social ✓ Continual contributions to local community events, charities and employee (+Safety) activities DTI’s leadership is focused on deriving long-term value for all stakeholders by: (1) ✓ Executive accountability through the election of an independent board Governance ✓ Strong internal controls 1) A majority of our directors are independent for the purposes of the applicable Nasdaq and Securities and Exchange Commission rules. 23

Expansive Offering to Supply Drilling Tools Required in a Typical Horizontal Job Differentiated and extensive inventory of tools to address the wide-ranging needs of oil & gas customers across all regions Represents Key DTI Rental Product Currently Not Supplied by DTI Crossover Subs Spiral Drill Collar Drill Pipe Sleeve Heavy Weight Stabilizer Drill Pipe Bit Sub Non-Magnetic Collar TM RotoSteer Stabilizer TM MWD Mud Motor Bit Drill-N-Ream 24

Overview of Directional Tool Rentals Key Equipment Stabilizers Reduces drill string vibration and torque… Drill Collars Adds weight to the BHA to increase rate of penetration (“ROP”) and reduce vibration… Subs and Other Equipment Variety of subs, crossovers and handling tools used in the drill string 25

Overview of Wellbore Optimization Tools Specialty tools division with focused field sales and service professionals providing rig site visits and customer service, enabling consistent product performance and customer satisfaction Products Offered Substantial Improvements in Wellbore Quality ⚫ Patented technology allows the tool to Drill-N- TM maintain a market leading position Ream (“DNR”) ⚫ Numerous benefits to the customer WellBore Conditioning ⚫ Allows operators to extend length of wellbore (1) Tool at a lower cost ⚫ 2023: Commercially launched Emerging ⚫ Improves ROP, reduces torque and drag and Technology eliminates slides TM “RotoSteer ” ⚫ Potential application for hundreds of wells annually 1) DTI distributes the Drill-N-Ream pursuant to a distribution agreement with Superior Drilling Products, Inc., the owner of the relevant patent. 26

Overview of Premium Tools Key Equipment DTI offers a wide array of premium tubulars for drilling, workover and completion operations, API blowout preventers and pressure control accessories as well as a comprehensive suite of related handling tools Tubulars Handling Tools API BOPs and Pressure Control Accessories 7 1 ⚫ Drill Pipe – 2 Τ to 5 Τ inch API bottleneck, slim-⚫ Stabbing Guides – for tubing and drill pipe⚫ Blowout Preventers – 5M, 10M and 15M psi 8 2 hole, API, proprietary double shoulder-high torque ⚫ Drifts – for all pipe sizes (Teflon, steel and ⚫ Accumulators – diesel, electric and air powered connections aluminum) ⚫ Hoses – high pressure, fire retardant and steel 1 1 Τ Τ ⚫ Hevi-Wate Drill Pipe – 3 to 5 inch API 2 2 ⚫ Rotary Slips – for tubing, casing, drill pipe and flex bottleneck, slim-hole, API, proprietary double drill collars ⚫ Spools – spacers, adaptors and diverters shoulder-high torque connections ⚫ Safety Clamps – for pipe and collars ⚫ Double Studded Adaptors 1 1 ⚫ Drill Collars – 3 Τ to 9 Τ steel spiral and slick 8 2 ⚫ Manual Tongs – K-25 to K-70 hand tongs and HT- ⚫ Gate Valves – manual, hydraulic and air actuated 200 manual rotary tongs ⚫ Kellys – hex or square from 38 to 46 inch ⚫ Chokes – manual adjustable and fixed orifice ⚫ Elevators – slip grip, bottleneck and bushing ⚫ Pup Joints – drill pipe and tubing types⚫ Manifolds – skid mounted custom buffers assembled to specification ⚫ Tubing – premium PH-6, CS-8 and API 8Rd with ⚫ Subs – TDS, wear, float, X-over, bit, lift and pump- 3 1 thread from 2 Τ to 4 Τ ⚫ Flanged Accessories – tees, crosses (flanged ins 8 2 and studded) ⚫ Stud Bolts – B7M H S service 2 ⚫ Chicksan Iron – loops, swivel joints and pups 27

Other Products and Services Products Offered Internal Support Services and Emerging Products ⚫ Independent inspection services equipment of all DTI divisions and select external customers Downhole ⚫ Critical to efficient operations Inspection Solutions ⚫ Services across North America including network of six domestic and one Canadian inspection facilities ⚫ Made-to-order downhole drilling tools ⚫ Completion and production Product Sales Product ⚫ Production desander tool operations Sales ⚫ Williston, ND manufacturing and distribution facility ⚫ Sustaining engineering Technical ⚫ Performance analysis Services ⚫ Product development Group ⚫ Technical support to quality assurance 28

Second Quarter 2024 Income Statement Drilling Tools International Corp. Consolidated Statement of Operations and Comprehensive Income (In thousands of U.S. dollars and rounded) (Unaudited) Three Months Ended June 30, Six Months Ended June 30, 2024 2023 2024 2023 Revenue, net: Tool rental $ 28,328 $ 2 9,002 $ 58,294 $ 61,278 Product sale 9 ,205 8,906 16,213 17,429 Total revenue, net 37,533 3 7,908 7 4,507 7 8,707 Operating costs and expenses: Cost of tool rental revenue 7,454 7,692 1 4,455 15,829 Cost of product sale revenue 2 ,544 1,157 4,080 2,460 Selling, general, and administrative expense 1 9,619 17,718 3 7,560 34,447 Depreciation and amortization expense 5 ,681 4,717 11,047 9,732 Total operating costs and expenses 35,298 3 1,284 67,142 6 2,468 Income (loss) from operations 2 ,235 6,624 7,365 16,239 Other expense, net: Interest expense, net ( 811) (348) (992) (922) Gain (loss) on sale of property 51 (1) 42 68 Unrealized gain on equity securities 480 420 729 387 Other income (expense), net (1,672) (4,382) (2,798) (6,035) Total other expense, net (1,952) (4,311) (3,019) ( 6,502) Income before income tax expense 283 2 ,313 4 ,346 9 ,737 Income tax (expense)/benefit 82 (1,376) ( 854) (3,099) Net income $ 365 $ 937 $ 3,492 $ 6,638 Accumulated dividends on redeemable convertible preferred stock — — — 314 Net income available to common shareholders $ 365 $ 937 $ 3 ,492 $ 6,324 Basic earnings per share $ 0.01 $ 0.07 $ 0.12 $ 0.49 Diluted earnings per share $ 0.01 $ 0.05 $ 0.12 $ 0 .33 Basic weighted-average common shares outstanding* 2 9,816,202 13,910,670 2 9,792,385 12,936,310 Diluted weighted-average common shares outstanding* 30,873,436 20,746,976 30,321,002 20,217,648 Comprehensive income: Net income $ 365 $ 937 $ 3 ,492 $ 6 ,638 Foreign currency translation adjustment, net of tax 102 ( 207) (408) ( 207) Net comprehensive income $ 467 $ 730 $ 3 ,084 $ 6,431 * Shares of legacy redeemable convertible preferred stock and legacy common stock have been retroactively restated to give effect to the Merger. 29

Second Quarter 2024 Balance Sheet Drilling Tools International Corp. Consolidated Balance Sheets (In thousands of U.S. dollars and rounded) (Unaudited) June 30, December 31, 2024 2023 ASSETS Current assets Cash $ 6,784 $ 6,003 Accounts receivable, net 35,122 2 9,929 Inventories, net 14,609 5,034 Prepaid expenses and other current assets 2,702 4,553 Investments - equity securities, at fair value 1 ,617 888 Total current assets 60,834 46,408 Property, plant and equipment, net 7 1,223 6 5,800 Operating lease right-of-use asset 2 1,827 18,786 Goodwill 7 ,962 — Intangible assets, net 3,076 216 Deferred financing costs, net 991 409 Deposits and other long-term assets 961 879 Total assets $ 166,874 $ 1 32,498 LIABILITIES AND SHAREHOLDERS' EQUITY Current liabilities Accounts payable $ 1 4,014 $ 7 ,751 Accrued expenses and other current liabilities 7,719 10,579 Current portion of operating lease liabilities 4 ,133 3,958 Current maturities of long-term debt 5 ,000 — Total current liabilities 30,866 22,288 Operating lease liabilities, less current portion 1 7,814 14,893 Long-term debt 19,167 — Deferred tax liabilities, net 6 ,227 6 ,627 Total liabilities 74,074 43,808 Commitments and contingencies Shareholders' equity Common stock, $0.0001 par value, shares authorized 500,000,000 as of June 30, 2024 and December 31, 2023, 29,859,564 shares issued and outstanding as of June 30, 2024 and 29,768,568 shares issued and outstanding as of December 31, 2023 3 3 Additional paid-in-capital 9 6,536 9 5,218 Accumulated deficit ( 3,105) (6,306) Accumulated other comprehensive loss ( 634) ( 225) Total shareholders' equity 92,800 88,690 Total liabilities and shareholders' equity $ 1 66,874 $ 1 32,498 30

Second Quarter 2024 Cash Flow Statement Drilling Tools International Corp. Consolidated Statement of Cash Flows (In thousands of U.S. dollars and rounded) (Unaudited) Six Months Ended June 30, 2024 2023 Cash flows from operating activities: Net income $ 3,492 $ 6 ,638 Adjustments to reconcile net income to net cash from operating activities: Depreciation and amortization 11,047 9 ,732 Amortization of deferred financing costs 139 37 Non-cash lease expense 2,315 2,275 Provision for excess and obsolete inventory — 19 Provision for excess and obsolete property and equipment 179 238 Provision for credit losses (16) 418 Deferred tax expense (400) 2 ,008 Gain on sale of property (51) ( 68) Loss on asset disposal 9 — Unrealized loss on interest rate swap — 91 Unrealized gain on equity securities (729) ( 387) Gross profit from sale of lost-in-hole equipment (4,987) (9,146) Stock-based compensation expense 1,064 3,986 Changes in operating assets and liabilities: Accounts receivable, net (1,449) ( 1,777) Prepaid expenses and other current assets 1,958 ( 1,531) Inventories, net (49) 1,409 Operating lease liabilities (2,226) (2,179) Accounts payable (2,158) 1,982 Accrued expenses and other current liabilities (3,745) 316 Net cash flows from operating activities 4,391 1 4,061 Cash flows from investing activities: Acquisition of a business, net of cash aquired (18,261) — Proceeds from sale of property and equipment 59 126 Purchase of property, plant and equipment (16,312) (24,617) Proceeds from sale of lost-in-hole equipment 7,786 11,103 Net cash from investing activities ( 26,728) ( 13,388) Cash flows from financing activities: Proceeds from Merger and PIPE Financing, net of transaction costs — 23,162 Payment of deferred financing costs (672) (281) Proceeds from revolving line of credit 1 ,469 7 1,646 Payments on revolving line of credit ( 1,469) (89,995) Proceeds from Term Loan 25,000 — Repayment of Term Loan (833) — Payments to holders of DTIH redeemable convertible preferred stock in connection with — ( 194) Net cash from financing activities 2 3,495 4,338 Effect of Changes in Foreign Exchange Rate ( 377) (207) Net Change in Cash 781 4 ,804 Cash at Beginning of Period 6,003 2,352 Cash at End of Period $ 6,784 $ 7,156 Supplemental cash flow information: Cash paid for interest $ 660 $ 851 Cash paid for income taxes $ 256 $ 2,139 Non-cash investing and financing activities: Fair value of CTG liabilities assumed in CTG Acquisition $ 3,162 $ — ROU assets obtained in exchange for operating lease liabilities $ 5 ,054 $ 2 ,635 Net exercise of stock options $ 255 $ — Shares withheld from exercise of stock options for payment of taxes $ 35 $ — Purchases of inventory included in accounts payable and accrued expenses and other current $ 5 ,082 $ 4,076 Purchases of property and equipment included in accounts payable and accrued expenses and $ 1,402 $ 7 ,640 Deferred financing fees included in accounts payable $ 49 $ 2 Non-cash directors and officers insurance $ — $ 1 ,472 Non-cash Merger financing $ — $ 2 ,000 Exchange of DTIH redeemable convertible preferred stock for DTIC Common Stock in $ — $ 7 ,193 Issuance of DTIC Common Stock to former holders of DTIH redeemable convertible $ — $ 10,805 preferred stock in connection with Exchange Agreements Accretion of redeemable convertible preferred stock to redemption value $ — $ 314 31

Reconciliation of Second Quarter 2024 Adjusted EBITDA Drilling Tools International Corp. Reconcilation of GAAP to Non-GAAP Measures (Unaudited) (In thousands of U.S. dollars and rounded) Three Months Ended June 30, 2024 2023 Net income (loss) $ 365 $ 937 Add (deduct): Income tax (expense)/benefit (82) 1,376 Depreciation and amortization 5,681 4,717 Interest expense, net 811 348 Stock option expense 855 1,661 Management fees 187 262 Loss (gain) on sale of property (51) 1 Unrealized (gain) loss on equity securities (480) (420) Transaction expense 2,020 4,142 Other expense, net ( 341) 241 Adjusted EBITDA $ 8,965 $ 1 3,265 32

Reconciliation of Second Quarter 2024 Adjusted Free Cash Flow Drilling Tools International Corp. Reconcilation of GAAP to Non-GAAP Measures (Unaudited) (In thousands of U.S. dollars and rounded) Three Months Ended June 30, 2024 2023 Net income (loss) $ 365 $ 937 Add (deduct): Income tax (expense)/benefit (82) 1,376 Depreciation and amortization 5 ,681 4,717 Interest expense, net 811 348 Stock option expense 855 1,661 Management fees 187 262 Loss (gain) on sale of property (51) 1 Unrealized (gain) loss on equity securities ( 480) (420) Transaction expense 2,020 4,142 Other expense, net (341) 241 Gross capital expenditures (10,084) (17,550) Adjusted Free Cash Flow $ ( 1,119) $ (4,285) 33

Reconciliation of Second Quarter 2024 Adjusted Net Income Drilling Tools International Corp. Reconcilation of GAAP to Non-GAAP Measures (Unaudited) (In thousands of U.S. dollars and rounded) Three Months Ended June 30, 2024 2023 Net income (loss) $ 365 $ 937 Transaction expense 2,020 4,142 Income tax expense ( 82) 1,376 Adjusted Income Before Tax $ 2,303 $ 6 ,455 Adjusted Income tax expense ( 668) 3,840 Adjusted Net Income $ 2 ,970 $ 2 ,615 Accumulated dividends on redeemable convertible preferred stock — — Adjusted Net income available to common shareholders $ 2,970 $ 2,615 Adjusted Basic earnings per share 0.10 0.19 Adjusted Diluted earnings per share 0 .10 0 .13 Basic weighted-average common shares outstanding* 2 9,816,202 13,910,670 Basic weighted-average common shares outstanding* 3 0,873,436 2 0,746,976 34

Reconciliation of 2024 Outlook Drilling Tools International Corp. Reconciliation of Estimated Consolidated Net Income to Adjusted EBITDA (In thousands of U.S. dollars and rounded) (Unaudited) Twelve Months Ended December 31, 2024 Low High Net Income $ 7 ,000 $ 10,000 Add (deduct) Interest expense, net 2,500 2,700 Income tax expense 2,500 2,800 Depreciation and amortization 2 2,500 23,500 Management fees 600 900 Other expense (500) - Stock option expense 2,400 2,600 Transaction expense 4,000 4,500 Adjusted EBITDA $ 41,000 $ 47,000 Revenue 155,000 170,000 Adjusted EBITDA Margin 26% 28% 35

Reconciliation of 2024 Outlook Drilling Tools International Corp. Reconciliation of Estimated Consolidated Net Income to Adjusted Free Cash Flow (In thousands of U.S. dollars and rounded) (Unaudited) Twelve Months Ended December 31, 2024 Low High Net Income $ 7,000 $ 10,000 Add (deduct) Interest expense, net 2,500 2,700 Income tax expense 2,500 2,800 Depreciation and amortization 2 2,500 23,500 Management fees 600 900 Other expense ( 500) - Stock option expense 2,400 2,600 Transaction expense 4,000 4,500 Gross capital expenditures (21,000) (22,000) Adjusted Free Cash Flow $ 20,000 $ 25,000 36

Reconciliation of 2024 Outlook Drilling Tools International Corp. Reconciliation of Estimated Consolidated Net Income to Adjusted Net Income (In thousands of U.S. dollars and rounded) (Unaudited) Twelve Months Ended December 31, 2024 Low High Net income (loss) $ 7 ,000 $ 10,000 Transaction expense $ 4,000 $ 4 ,500 Income tax expense 2,500 2,800 Adjusted Income Before Tax $ 13,500 $ 17,300 3,600 3,800 Adjusted Income tax expense Adjusted Net Income $ 9,900 $ 13,500 37

Document and Entity Information	Aug. 01, 2024
Cover [Abstract]
Entity Registrant Name	Drilling Tools International Corp
Amendment Flag	false
Entity Central Index Key	0001884516
Document Type	8-K
Document Period End Date	Aug. 01, 2024
Entity Incorporation State Country Code	DE
Entity File Number	001-41103
Entity Tax Identification Number	87-2488708
Entity Address, Address Line One	3701 Briarpark Drive
Entity Address, Address Line Two	Suite 150
Entity Address, City or Town	Houston
Entity Address, State or Province	TX
Entity Address, Postal Zip Code	77042
City Area Code	(832)
Local Phone Number	742-8500
Written Communications	false
Soliciting Material	false
Pre Commencement Tender Offer	false
Pre Commencement Issuer Tender Offer	false
Security 12b Title	Common Stock, par value $0.0001 per share
Trading Symbol	DTI
Security Exchange Name	NASDAQ
Entity Emerging Growth Company	true
Entity Ex Transition Period	false