Wesdome Gold Mines Ltd. (TSX: WDO) (“Wesdome” or the “Company”)
today announces underground exploration drilling results from the
Kiena Deep A zone at the Company’s 100% owned Kiena Mine Complex in
Val d'Or, Quebec.
Over the past several years, underground
drilling has focussed on testing areas proximal to the Kiena Deep A
zones. As part of this exploration focus, early success discovered
the Footwall zones in 2021. Subsequently in 2022, exploration
confirmed the presence of the South Limb at depth associated with
Kiena Deep A zone (see press release dated June 1, 2022),
suggesting potential to increase the strike length of the high
grade A zone. Later in 2022, drilling intersected two new zones in
the relative high rock quality hanging wall basalt that returned
2,850 g/t Au (“grams per tonne gold”) over 1.5 metres (“m”) (see
press release dated November 16, 2022).
Since November, drill results have extended the
Kiena Deep A zone 125 m down plunge. The A zone extends
continuously from 1,100 m to approximately 2,000 m below surface
and remains open at depth. Hole N103-6840W5 and N103-6840W6
confirmed the extension of the North Limb of the fold, with the
overall geometry of the fold confirmed by hole 6840W4 (Figure 1),
the true thickness of the North Limb remains unknown. The down
plunge continuity, volume and grade at depth of the South limb will
be tested by future drilling as access is provided by the hanging
wall ramp.
Additionally, the latest drilling results have
also continued to better define and expand the Footwall zones.
Lenses FWZ_1 to FWZ_4 were intersected by holes N112-6861,
N112-6861W1, and N112-6862W2 (Figure 2). The results obtained have
extended these lenses and also increased confidence in the validity
of the geological model.
Hole N103-6839W4 intersected and further defined
the Hanging Wall Basalt zone (“HWB”) reported in the November 16,
2022 press release (Figure 1). More drilling is planned to better
define the orientation and the thickness of this zone.
Highlights of the recent drilling are listed
below and summarized in Table 1.
- Hole N112-6861: 75.6 g/t Au over 10.0 m core length (35.8 g/t
Au capped, 6.4 m true width) A zone
- Hole N103-6840W5: 23.7 g/t Au over 5.0 m core length (23.7 g/t
Au capped, unknown true width) North Limb zone
- Hole N103-6840W6: 26.8 g/t Au over 4.0 m core length (24.8 g/t
Au capped, unknown true width) North Limb zone
- Hole N112-6861: 33.6 g/t Au over 21.8 m core length (10.8 g/t
Au capped, 4.3 m true width) Footwall_2 zone
- Hole N103-6839W4: 4.1 g/t Au over 22.8 m core length - Hanging
Wall Basalt zone
Assays capped at 90.0 g/t Au for A zone and capped at 35.0 g/t
Au for the Hanging Wall Basalt zones. True widths are
estimated.
Mr. Warwick Morley-Jepson, Interim President and
CEO commented, “We are pleased with the recent drill results that
are continuing to better define and expand the recent discoveries
adjacent to the Kiena Deep A Zone, namely the Footwall, South Limb
and Hanging Wall Basalt zones. These zones have the potential to
increase the number of ounces per vertical metre and to provide
additional working faces during mining using the same underground
infrastructure utilized to access the A zone. This can be leveraged
to mine these additional zones on a lower unit cost basis. The
discovery of these zones highlights the potential to add ounces
within the basalt, where the rock quality is significantly better
than in the footwall of the A Zone allowing for increased overall
development rates.
Additionally, recent drilling has extended the A
zone a further 125 metres down plunge, illustrating the future
growth potential of this zone. Obviously, testing at depth
potential remains one of the focuses of current drilling.
With the completion of the paste fill plant
commissioning on November 30, 2022, commercial production at the
Kiena Mine was declared effective December 1, 2022. To date, the
paste fill plant has performed well, with the focus now primarily
on ramp development. Currently ahead of schedule, ramp development
in 2023 is designed to provide access to the much wider part of the
high grade A zone in early 2024. Wesdome will continue to provide
periodic progress updates throughout the year.”
TECHNICAL DISCLOSURE
The underground technical and geoscientific
content of this release has been compiled, reviewed, and approved
by Bruno Turcotte, P.Geo., (OGQ #453) Chief Geologist – Underground
Exploration of the Company, a "Qualified Person" as defined in
National Instrument 43-101 -Standards of Disclosure for Mineral
Projects.
Analytical work was performed by ALS Minerals of
Val-d’Or (Quebec), a certified commercial laboratory (Accredited
Lab #689). Sample preparation was completed at ALS Minerals in Val
d'Or (Quebec). Assaying comprised fire assay methods with an atomic
absorption finish. Any sample assaying >3 g/t Au was rerun by
fire assay method with gravimetric finish, and any sample assaying
>10 g/t Au was rerun with the metallic sieve method. In addition
to laboratory internal duplicates, standards, and blanks, the
geology department inserts blind duplicates, standards, and blanks
into the sample stream at a frequency of one in twenty to monitor
quality control.
ABOUT WESDOMEWesdome is a
Canadian focused gold producer with two high grade underground
assets, the Eagle River mine in Ontario and the recently re-started
Kiena mine in Quebec. The Company also retains meaningful
exposure to the Moss Lake gold deposit in Ontario through its
equity position in Goldshore Resources Inc. The Company’s primary
goal is to responsibly leverage this operating platform and
high-quality brownfield and greenfield exploration pipeline to
build Canada’s next intermediate gold producer. Wesdome trades
on the Toronto Stock Exchange under the symbol “WDO,” with a
secondary listing on the OTCQX under the symbol “WDOFF.”
For further information, please
contact:
| Warwick
Morley-Jepson or |
Lindsay
Carpenter Dunlop |
| Interim President and CEO |
VP Investor Relations |
| 416-360-3743 ext. 2029 |
416-360-3743 ext. 2025 |
| w.morley-jepson@wesdome.com |
lindsay.dunlop@wesdome.com |
| |
|
| 220 Bay St, Suite 1200 |
|
| Toronto, ON, M5J 2W4 |
|
| Toll Free: 1-866-4-WDO-TSX |
|
| Phone: 416-360-3743, Fax: 416-360-7620 |
|
| Website: www.wesdome.com |
|
This news release contains “forward-looking
information” which may include, but is not limited to, statements
with respect to the future financial or operating performance of
the Company and its projects. Often, but not always,
forward-looking statements can be identified by the use of words
such as “plans”, “expects”, “is expected”, “budget”, “scheduled”,
“estimates”, “forecasts”, “intends”, “anticipates”, or “believes”
or variations (including negative variations) of such words and
phrases, or state that certain actions, events or results “may”,
“could”, “would”, “might” or “will” be taken, occur or be achieved.
Forward-looking statements involve known and unknown risks,
uncertainties and other factors which may cause the actual results,
performance or achievements of the Company to be materially
different from any future results, performance or achievements
expressed or implied by the forward-looking statements.
Forward-looking statements contained herein are made as of the date
of this press release and the Company disclaims any obligation to
update any forward-looking statements, whether as a result of new
information, future events or results or otherwise. There can be no
assurance that forward-looking statements will prove to be
accurate, as actual results and future events could differ
materially from those anticipated in such statements. The Company
undertakes no obligation to update forward-looking statements if
circumstances, management’s estimates or opinions should change,
except as required by securities legislation. Accordingly, the
reader is cautioned not to place undue reliance on forward-looking
statements. The Company has included in this news release certain
non-IFRS performance measures, including, but not limited to, mine
operating profit, mining and processing costs and cash costs. Cash
costs per ounce reflect actual mine operating costs incurred during
the fiscal period divided by the number of ounces produced. These
measures are not defined under IFRS and therefore should not be
considered in isolation or as an alternative to or more meaningful
than, net income (loss) or cash flow from operating activities as
determined in accordance with IFRS as an indicator of our financial
performance or liquidity. The Company believes that, in addition to
conventional measures prepared in accordance with IFRS, certain
investors use this information to evaluate the Company's
performance and ability to generate cash flow
Table 1: Kiena Complex Underground Drilling Assay and
Composite Results
Composites
|
Hole No. |
From (m) |
To (m) |
Core Length (m) |
Estimated True width (m) |
Grade (g/t Au) |
Cut Grade (35 g/t Au) |
Name Zone |
|
N112-6861 |
321.0 |
328.5 |
7.5 |
4.4 |
3.92 |
3.92 |
BZA_1 |
|
N112-6861W1 |
177.0 |
182.4 |
5.4 |
5.0 |
11.24 |
7.47 |
BZA_1 |
|
|
|
|
|
|
|
|
|
|
N103-6839W4 |
362.6 |
369.2 |
6.6 |
4.0 |
72.24 |
20.15 |
A Zone |
|
N103-6839W6 |
381.3 |
388.3 |
7.0 |
5.0 |
4.01 |
4.01 |
A Zone |
|
N103-6840W4 |
313.5 |
318.9 |
5.4 |
NA |
19.47 |
16.39 |
A Zone |
|
N103-6840W5 |
385.0 |
390.0 |
5.0 |
NA |
23.69 |
23.69 |
A Zone |
|
N103-6840W6 |
289.0 |
293.0 |
4.0 |
NA |
26.84 |
24.84 |
A Zone |
|
N112-6861 |
339.0 |
349.0 |
10.0 |
6.4 |
75.64 |
35.79 |
A Zone |
|
N112-6861W2 |
161.8 |
172.5 |
10.7 |
4.1 |
6.06 |
6.06 |
A Zone |
|
|
|
|
|
|
|
|
|
|
N103-6839W4 |
378.9 |
383.9 |
5.0 |
3.8 |
6.11 |
6.11 |
A1 Zone |
|
N112-6861W1 |
232.5 |
266.0 |
33.5 |
4.2 |
6.35 |
6.19 |
A1 Zone |
|
N112-6861W2 |
182.5 |
188.3 |
5.8 |
3.0 |
43.14 |
24.31 |
A1 Zone |
|
|
|
|
|
|
|
|
|
|
N112-6861 |
382.8 |
402.7 |
19.9 |
4.5 |
5.83 |
5.83 |
A2 Zone |
|
N112-6861W1 |
287.5 |
328.5 |
41.0 |
3.9 |
3.35 |
3.35 |
A2 Zone |
|
|
|
|
|
|
|
|
|
|
N112-6861 |
408.7 |
428.0 |
19.3 |
4.0 |
7.77 |
7.77 |
FWZ_1 |
|
N112-6861W2 |
252.0 |
256.9 |
4.9 |
3.0 |
77.44 |
19.48 |
FWZ_1 |
|
N112-6861 |
429.4 |
451.2 |
21.8 |
4.3 |
33.61 |
10.82 |
FWZ_2 |
|
N112-6861W1 |
397.0 |
411.7 |
14.7 |
5.3 |
13.16 |
13.16 |
FWZ_3 |
|
N112-6861W1 |
429.9 |
437.2 |
7.3 |
4.2 |
8.67 |
8.67 |
FWZ_4 |
|
|
|
|
|
|
|
|
|
|
N103-6839W4 |
289.0 |
311.8 |
22.8 |
NA |
4.07 |
4.07 |
New Basalt |
Assays
|
Hole No. |
From (m) |
To (m) |
Core Length (m) |
Grade (g/t Au) |
Cut Grade (35 g/t Au) |
Name Zone |
|
N103-6839W4 |
289.0 |
290.0 |
1.0 |
4.90 |
4.90 |
HWB |
|
N103-6839W4 |
290.0 |
291.0 |
1.0 |
2.82 |
2.82 |
HWB |
|
N103-6839W4 |
291.0 |
292.0 |
1.0 |
4.45 |
4.45 |
HWB |
|
N103-6839W4 |
292.0 |
293.0 |
1.0 |
0.91 |
0.91 |
HWB |
|
N103-6839W4 |
293.0 |
294.0 |
1.0 |
1.78 |
1.78 |
HWB |
|
N103-6839W4 |
294.0 |
294.8 |
0.8 |
1.03 |
1.03 |
HWB |
|
N103-6839W4 |
294.8 |
295.6 |
0.8 |
1.36 |
1.36 |
HWB |
|
N103-6839W4 |
295.6 |
296.4 |
0.8 |
2.09 |
2.09 |
HWB |
|
N103-6839W4 |
296.4 |
297.2 |
0.8 |
4.31 |
4.31 |
HWB |
|
N103-6839W4 |
297.2 |
298.0 |
0.8 |
7.84 |
7.84 |
HWB |
|
N103-6839W4 |
298.0 |
298.8 |
0.8 |
0.76 |
0.76 |
HWB |
|
N103-6839W4 |
298.8 |
299.8 |
1.0 |
2.61 |
2.61 |
HWB |
|
N103-6839W4 |
299.8 |
300.8 |
1.0 |
2.30 |
2.30 |
HWB |
|
N103-6839W4 |
300.8 |
301.8 |
1.0 |
1.00 |
1.00 |
HWB |
|
N103-6839W4 |
301.8 |
302.8 |
1.0 |
2.33 |
2.33 |
HWB |
|
N103-6839W4 |
302.8 |
303.8 |
1.0 |
0.73 |
0.73 |
HWB |
|
N103-6839W4 |
303.8 |
304.8 |
1.0 |
3.91 |
3.91 |
HWB |
|
N103-6839W4 |
304.8 |
305.8 |
1.0 |
9.17 |
9.17 |
HWB |
|
N103-6839W4 |
305.8 |
306.8 |
1.0 |
16.40 |
16.40 |
HWB |
|
N103-6839W4 |
306.8 |
307.8 |
1.0 |
5.20 |
5.20 |
HWB |
|
N103-6839W4 |
307.8 |
308.8 |
1.0 |
4.01 |
4.01 |
HWB |
|
N103-6839W4 |
308.8 |
309.8 |
1.0 |
1.70 |
1.70 |
HWB |
|
N103-6839W4 |
309.8 |
310.8 |
1.0 |
0.85 |
0.85 |
HWB |
|
N103-6839W4 |
310.8 |
311.8 |
1.0 |
13.70 |
13.70 |
HWB |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Length (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N103-6839W4 |
362.6 |
363.5 |
0.9 |
30.70 |
30.70 |
A Zone |
|
N103-6839W4 |
363.5 |
364.4 |
0.9 |
13.05 |
13.05 |
A Zone |
|
N103-6839W4 |
364.4 |
365.3 |
0.9 |
9.62 |
9.62 |
A Zone |
|
N103-6839W4 |
365.3 |
366.2 |
0.9 |
472.00 |
90.00 |
A Zone |
|
N103-6839W4 |
366.2 |
367.2 |
1.0 |
0.31 |
0.31 |
A Zone |
|
N103-6839W4 |
367.2 |
368.1 |
0.9 |
1.16 |
1.16 |
A Zone |
|
N103-6839W4 |
368.1 |
369.2 |
1.1 |
2.34 |
2.34 |
A Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N103-6839W4 |
378.9 |
380.2 |
1.3 |
5.48 |
5.48 |
A1 Zone |
|
N103-6839W4 |
380.2 |
381.0 |
0.8 |
7.76 |
7.76 |
A1 Zone |
|
N103-6839W4 |
381.0 |
382.0 |
1.0 |
6.86 |
6.86 |
A1 Zone |
|
N103-6839W4 |
382.0 |
383.0 |
1.0 |
5.62 |
5.62 |
A1 Zone |
|
N103-6839W4 |
383.0 |
383.9 |
0.9 |
5.27 |
5.27 |
A1 Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N103-6839W6 |
381.3 |
382.3 |
1.0 |
3.88 |
3.88 |
A Zone |
|
N103-6839W6 |
382.3 |
383.3 |
1.0 |
0.18 |
0.18 |
A Zone |
|
N103-6839W6 |
383.3 |
384.3 |
1.0 |
0.05 |
0.05 |
A Zone |
|
N103-6839W6 |
384.3 |
385.3 |
1.0 |
0.14 |
0.14 |
A Zone |
|
N103-6839W6 |
385.3 |
386.3 |
1.0 |
0.25 |
0.25 |
A Zone |
|
N103-6839W6 |
386.3 |
387.3 |
1.0 |
22.40 |
22.40 |
A Zone |
|
N103-6839W6 |
387.3 |
388.3 |
1.0 |
1.20 |
1.20 |
A Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N103-6840W4 |
313.5 |
315.0 |
1.5 |
1.28 |
1.28 |
A Zone |
|
N103-6840W4 |
315.0 |
316.0 |
1.0 |
0.63 |
0.63 |
A Zone |
|
N103-6840W4 |
316.0 |
317.0 |
1.0 |
0.47 |
0.47 |
A Zone |
|
N103-6840W4 |
317.0 |
318.0 |
1.0 |
4.49 |
4.49 |
A Zone |
|
N103-6840W4 |
318.0 |
318.9 |
0.9 |
108.50 |
90.00 |
A Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N103-6840W5 |
385.0 |
386.0 |
1.0 |
8.39 |
8.39 |
A Zone |
|
N103-6840W5 |
386.0 |
387.0 |
1.0 |
46.70 |
46.70 |
A Zone |
|
N103-6840W5 |
387.0 |
388.0 |
1.0 |
54.90 |
54.90 |
A Zone |
|
N103-6840W5 |
388.0 |
389.0 |
1.0 |
7.38 |
7.38 |
A Zone |
|
N103-6840W5 |
389.0 |
390.0 |
1.0 |
1.08 |
1.08 |
A Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N103-6840W6 |
289 |
290 |
1.0 |
0.62 |
0.62 |
A Zone |
|
N103-6840W6 |
290 |
291 |
1.0 |
5.54 |
5.54 |
A Zone |
|
N103-6840W6 |
291 |
292 |
1.0 |
98.00 |
90.00 |
A Zone |
|
N103-6840W6 |
292 |
293 |
1.0 |
3.20 |
3.20 |
A Zone |
|
N103-6840W6 |
293 |
294 |
1.0 |
0.26 |
0.26 |
A Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861 |
321 |
323 |
1.5 |
0.56 |
0.56 |
BZA_1 |
|
N112-6861 |
323 |
324 |
1.5 |
0.03 |
0.03 |
BZA_1 |
|
N112-6861 |
324 |
326 |
1.5 |
0.16 |
0.16 |
BZA_1 |
|
N112-6861 |
326 |
327 |
1.5 |
0.43 |
0.43 |
BZA_1 |
|
N112-6861 |
327 |
329 |
1.5 |
18.4 |
18.4 |
BZA_1 |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861 |
382.8 |
384.3 |
1.5 |
2.59 |
2.59 |
A2 Zone |
|
N112-6861 |
384.3 |
385.3 |
1.0 |
3.67 |
3.67 |
A2 Zone |
|
N112-6861 |
385.3 |
386.2 |
0.9 |
1.40 |
1.40 |
A2 Zone |
|
N112-6861 |
386.2 |
387.3 |
1.1 |
15.35 |
15.35 |
A2 Zone |
|
N112-6861 |
387.3 |
388.3 |
1.0 |
0.20 |
0.20 |
A2 Zone |
|
N112-6861 |
388.3 |
389.3 |
1.0 |
0.14 |
0.14 |
A2 Zone |
|
N112-6861 |
389.3 |
390.3 |
1.0 |
2.10 |
2.10 |
A2 Zone |
|
N112-6861 |
390.3 |
391.3 |
1.0 |
6.28 |
6.28 |
A2 Zone |
|
N112-6861 |
391.3 |
392.3 |
1.0 |
0.49 |
0.49 |
A2 Zone |
|
N112-6861 |
392.3 |
393.3 |
1.0 |
0.48 |
0.48 |
A2 Zone |
|
N112-6861 |
393.3 |
394.3 |
1.0 |
0.05 |
0.05 |
A2 Zone |
|
N112-6861 |
394.3 |
395.2 |
0.9 |
0.07 |
0.07 |
A2 Zone |
|
N112-6861 |
395.2 |
396.1 |
0.9 |
5.69 |
5.69 |
A2 Zone |
|
N112-6861 |
396.1 |
397.1 |
1.0 |
6.23 |
6.23 |
A2 Zone |
|
N112-6861 |
397.1 |
398.0 |
0.9 |
0.31 |
0.31 |
A2 Zone |
|
N112-6861 |
398.0 |
398.7 |
0.7 |
78.30 |
78.30 |
A2 Zone |
|
N112-6861 |
398.7 |
399.7 |
1.0 |
0.54 |
0.54 |
A2 Zone |
|
N112-6861 |
399.7 |
400.7 |
1.0 |
4.10 |
4.10 |
A2 Zone |
|
N112-6861 |
400.7 |
401.7 |
1.0 |
2.36 |
2.36 |
A2 Zone |
|
N112-6861 |
401.7 |
402.7 |
1.0 |
6.98 |
6.98 |
A2 Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861 |
408.7 |
409.7 |
1.0 |
8.90 |
8.90 |
FWZ_1 |
|
N112-6861 |
409.7 |
410.7 |
1.0 |
4.08 |
4.08 |
FWZ_1 |
|
N112-6861 |
410.7 |
411.7 |
1.0 |
1.96 |
1.96 |
FWZ_1 |
|
N112-6861 |
411.7 |
413.1 |
1.4 |
3.91 |
3.91 |
FWZ_1 |
|
N112-6861 |
413.1 |
414.0 |
0.9 |
1.00 |
1.00 |
FWZ_1 |
|
N112-6861 |
414.0 |
415.0 |
1.0 |
0.77 |
0.77 |
FWZ_1 |
|
N112-6861 |
415.0 |
416.0 |
1.0 |
0.57 |
0.57 |
FWZ_1 |
|
N112-6861 |
416.0 |
417.0 |
1.0 |
0.84 |
0.84 |
FWZ_1 |
|
N112-6861 |
417.0 |
418.0 |
1.0 |
1.30 |
1.30 |
FWZ_1 |
|
N112-6861 |
418.0 |
419.0 |
1.0 |
0.69 |
0.69 |
FWZ_1 |
|
N112-6861 |
419.0 |
420.0 |
1.0 |
0.52 |
0.52 |
FWZ_1 |
|
N112-6861 |
420.0 |
420.8 |
0.8 |
1.19 |
1.19 |
FWZ_1 |
|
N112-6861 |
420.8 |
422.0 |
1.2 |
1.16 |
1.16 |
FWZ_1 |
|
N112-6861 |
422.0 |
423.0 |
1.0 |
0.07 |
0.07 |
FWZ_1 |
|
N112-6861 |
423.0 |
424.0 |
1.0 |
0.02 |
0.02 |
FWZ_1 |
|
N112-6861 |
424.0 |
425.0 |
1.0 |
82.70 |
82.70 |
FWZ_1 |
|
N112-6861 |
425.0 |
426.0 |
1.0 |
31.90 |
31.90 |
FWZ_1 |
|
N112-6861 |
426.0 |
427.0 |
1.0 |
3.52 |
3.52 |
FWZ_1 |
|
N112-6861 |
427.0 |
428.0 |
1.0 |
3.38 |
3.38 |
FWZ_1 |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861 |
429.4 |
430.4 |
1.0 |
4.66 |
4.66 |
FWZ_2 |
|
N112-6861 |
430.4 |
431.6 |
1.2 |
504.00 |
90.00 |
FWZ_2 |
|
N112-6861 |
431.6 |
432.6 |
1.0 |
29.20 |
29.20 |
FWZ_2 |
|
N112-6861 |
432.6 |
433.6 |
1.0 |
89.00 |
89.00 |
FWZ_2 |
|
N112-6861 |
433.6 |
434.5 |
0.9 |
0.22 |
0.22 |
FWZ_2 |
|
N112-6861 |
434.5 |
436.0 |
1.5 |
0.13 |
0.13 |
FWZ_2 |
|
N112-6861 |
436.0 |
437.5 |
1.5 |
0.08 |
0.08 |
FWZ_2 |
|
N112-6861 |
437.5 |
439.0 |
1.5 |
0.02 |
0.02 |
FWZ_2 |
|
N112-6861 |
439.0 |
440.5 |
1.5 |
0.02 |
0.02 |
FWZ_2 |
|
N112-6861 |
440.5 |
442.0 |
1.5 |
0.05 |
0.05 |
FWZ_2 |
|
N112-6861 |
442.0 |
442.3 |
0.3 |
0.02 |
0.02 |
FWZ_2 |
|
N112-6861 |
442.3 |
444.3 |
2.0 |
0.13 |
0.13 |
FWZ_2 |
|
N112-6861 |
444.3 |
445.0 |
0.7 |
0.84 |
0.84 |
FWZ_2 |
|
N112-6861 |
445.0 |
445.7 |
0.7 |
0.37 |
0.37 |
FWZ_2 |
|
N112-6861 |
445.7 |
447.2 |
1.5 |
0.12 |
0.12 |
FWZ_2 |
|
N112-6861 |
447.2 |
448.2 |
1.0 |
0.03 |
0.03 |
FWZ_2 |
|
N112-6861 |
448.2 |
449.4 |
1.2 |
0.02 |
0.02 |
FWZ_2 |
|
N112-6861 |
449.4 |
450.2 |
0.8 |
0.01 |
0.01 |
FWZ_2 |
|
N112-6861 |
450.2 |
451.2 |
1.0 |
2.94 |
2.94 |
FWZ_2 |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (35 g/t Au) |
Name Zone |
|
N112-6861W1 |
177 |
178 |
1.0 |
1.54 |
1.54 |
BZA_1 |
|
N112-6861W1 |
178 |
179 |
1.0 |
0.99 |
0.99 |
BZA_1 |
|
N112-6861W1 |
179 |
180 |
0.8 |
0.44 |
0.44 |
BZA_1 |
|
N112-6861W1 |
180 |
181 |
1.0 |
55.40 |
35.00 |
BZA_1 |
|
N112-6861W1 |
181 |
182 |
0.8 |
1.25 |
1.25 |
BZA_1 |
|
N112-6861W1 |
182 |
182 |
0.8 |
1.80 |
1.80 |
BZA_1 |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861W1 |
232.5 |
233.5 |
1.0 |
5.90 |
5.90 |
A1 Zone |
|
N112-6861W1 |
233.5 |
234.5 |
1.0 |
1.26 |
1.26 |
A1 Zone |
|
N112-6861W1 |
234.5 |
235.4 |
0.9 |
1.80 |
1.80 |
A1 Zone |
|
N112-6861W1 |
235.4 |
236.3 |
0.9 |
0.23 |
0.23 |
A1 Zone |
|
N112-6861W1 |
236.3 |
237.2 |
0.9 |
0.31 |
0.31 |
A1 Zone |
|
N112-6861W1 |
237.2 |
238.1 |
0.9 |
0.30 |
0.30 |
A1 Zone |
|
N112-6861W1 |
238.1 |
239.0 |
0.9 |
0.83 |
0.83 |
A1 Zone |
|
N112-6861W1 |
239.0 |
239.9 |
0.9 |
0.15 |
0.15 |
A1 Zone |
|
N112-6861W1 |
239.9 |
240.8 |
0.9 |
2.44 |
2.44 |
A1 Zone |
|
N112-6861W1 |
240.8 |
241.7 |
0.9 |
0.26 |
0.26 |
A1 Zone |
|
N112-6861W1 |
241.7 |
242.8 |
1.1 |
2.11 |
2.11 |
A1 Zone |
|
N112-6861W1 |
242.8 |
243.9 |
1.1 |
1.72 |
1.72 |
A1 Zone |
|
N112-6861W1 |
243.9 |
245.0 |
1.1 |
0.34 |
0.34 |
A1 Zone |
|
N112-6861W1 |
245.0 |
246.0 |
1.0 |
0.03 |
0.03 |
A1 Zone |
|
N112-6861W1 |
246.0 |
247.0 |
1.0 |
0.03 |
0.03 |
A1 Zone |
|
N112-6861W1 |
247.0 |
248.0 |
1.0 |
0.02 |
0.02 |
A1 Zone |
|
N112-6861W1 |
248.0 |
249.0 |
1.0 |
0.06 |
0.06 |
A1 Zone |
|
N112-6861W1 |
249.0 |
250.0 |
1.0 |
0.66 |
0.66 |
A1 Zone |
|
N112-6861W1 |
250.0 |
251.0 |
1.0 |
95.40 |
90.00 |
A1 Zone |
|
N112-6861W1 |
251.0 |
252.0 |
1.0 |
0.94 |
0.94 |
A1 Zone |
|
N112-6861W1 |
252.0 |
253.0 |
1.0 |
0.07 |
0.07 |
A1 Zone |
|
N112-6861W1 |
253.0 |
254.0 |
1.0 |
0.45 |
0.45 |
A1 Zone |
|
N112-6861W1 |
254.0 |
255.0 |
1.0 |
4.35 |
4.35 |
A1 Zone |
|
N112-6861W1 |
255.0 |
256.0 |
1.0 |
2.91 |
2.91 |
A1 Zone |
|
N112-6861W1 |
256.0 |
257.0 |
1.0 |
1.07 |
1.07 |
A1 Zone |
|
N112-6861W1 |
257.0 |
258.0 |
1.0 |
0.23 |
0.23 |
A1 Zone |
|
N112-6861W1 |
258.0 |
259.0 |
1.0 |
0.70 |
0.70 |
A1 Zone |
|
N112-6861W1 |
259.0 |
260.0 |
1.0 |
5.52 |
5.52 |
A1 Zone |
|
N112-6861W1 |
260.0 |
261.0 |
1.0 |
0.98 |
0.98 |
A1 Zone |
|
N112-6861W1 |
261.0 |
262.0 |
1.0 |
1.42 |
1.42 |
A1 Zone |
|
N112-6861W1 |
262.0 |
263.0 |
1.0 |
0.64 |
0.64 |
A1 Zone |
|
N112-6861W1 |
263.0 |
264.0 |
1.0 |
1.14 |
1.14 |
A1 Zone |
|
N112-6861W1 |
264.0 |
265.0 |
1.0 |
15.60 |
15.60 |
A1 Zone |
|
N112-6861W1 |
265.0 |
266.0 |
1.0 |
63.00 |
63.00 |
A1 Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861W1 |
287.5 |
289.0 |
1.5 |
8.05 |
8.05 |
A2 Zone |
|
N112-6861W1 |
289.0 |
290.5 |
1.5 |
20.00 |
20.00 |
A2 Zone |
|
N112-6861W1 |
290.5 |
291.2 |
0.7 |
1.51 |
1.51 |
A2 Zone |
|
N112-6861W1 |
291.2 |
292.2 |
1.0 |
0.98 |
0.98 |
A2 Zone |
|
N112-6861W1 |
292.2 |
292.8 |
0.6 |
2.98 |
2.98 |
A2 Zone |
|
N112-6861W1 |
292.8 |
294.3 |
1.5 |
0.14 |
0.14 |
A2 Zone |
|
N112-6861W1 |
294.3 |
295.8 |
1.5 |
0.05 |
0.05 |
A2 Zone |
|
N112-6861W1 |
295.8 |
297.3 |
1.5 |
0.02 |
0.02 |
A2 Zone |
|
N112-6861W1 |
297.3 |
298.8 |
1.5 |
2.16 |
2.16 |
A2 Zone |
|
N112-6861W1 |
298.8 |
300.3 |
1.5 |
2.56 |
2.56 |
A2 Zone |
|
N112-6861W1 |
300.3 |
301.8 |
1.5 |
0.56 |
0.56 |
A2 Zone |
|
N112-6861W1 |
301.8 |
303.0 |
1.2 |
0.85 |
0.85 |
A2 Zone |
|
N112-6861W1 |
303.0 |
304.0 |
1.0 |
1.67 |
1.67 |
A2 Zone |
|
N112-6861W1 |
304.0 |
305.0 |
1.0 |
2.82 |
2.82 |
A2 Zone |
|
N112-6861W1 |
305.0 |
306.0 |
1.0 |
1.46 |
1.46 |
A2 Zone |
|
N112-6861W1 |
306.0 |
307.0 |
1.0 |
4.35 |
4.35 |
A2 Zone |
|
N112-6861W1 |
307.0 |
308.0 |
1.0 |
8.50 |
8.50 |
A2 Zone |
|
N112-6861W1 |
308.0 |
309.0 |
1.0 |
2.53 |
2.53 |
A2 Zone |
|
N112-6861W1 |
309.0 |
310.0 |
1.0 |
6.76 |
6.76 |
A2 Zone |
|
N112-6861W1 |
310.0 |
311.0 |
1.0 |
2.62 |
2.62 |
A2 Zone |
|
N112-6861W1 |
311.0 |
312.0 |
1.0 |
2.11 |
2.11 |
A2 Zone |
|
N112-6861W1 |
312.0 |
313.0 |
1.0 |
0.31 |
0.31 |
A2 Zone |
|
N112-6861W1 |
313.0 |
314.0 |
1.0 |
5.71 |
5.71 |
A2 Zone |
|
N112-6861W1 |
314.0 |
315.0 |
1.0 |
2.71 |
2.71 |
A2 Zone |
|
N112-6861W1 |
315.0 |
316.1 |
1.1 |
0.66 |
0.66 |
A2 Zone |
|
N112-6861W1 |
316.1 |
317.2 |
1.1 |
0.25 |
0.25 |
A2 Zone |
|
N112-6861W1 |
317.2 |
318.7 |
1.5 |
0.03 |
0.03 |
A2 Zone |
|
N112-6861W1 |
318.7 |
320.2 |
1.5 |
0.01 |
0.01 |
A2 Zone |
|
N112-6861W1 |
320.2 |
321.2 |
1.0 |
0.01 |
0.01 |
A2 Zone |
|
N112-6861W1 |
321.2 |
322.1 |
0.9 |
6.51 |
6.51 |
A2 Zone |
|
N112-6861W1 |
322.1 |
323.2 |
1.1 |
3.46 |
3.46 |
A2 Zone |
|
N112-6861W1 |
323.2 |
324.2 |
1.0 |
1.06 |
1.06 |
A2 Zone |
|
N112-6861W1 |
324.2 |
325.2 |
1.0 |
5.40 |
5.40 |
A2 Zone |
|
N112-6861W1 |
325.2 |
326.2 |
1.0 |
0.25 |
0.25 |
A2 Zone |
|
N112-6861W1 |
326.2 |
327.2 |
1.0 |
2.65 |
2.65 |
A2 Zone |
|
N112-6861W1 |
327.2 |
328.5 |
1.3 |
15.95 |
15.95 |
A2 Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861W1 |
397.0 |
398.0 |
1.0 |
3.75 |
3.75 |
FWZ_3 |
|
N112-6861W1 |
398.0 |
399.0 |
1.0 |
0.66 |
0.66 |
FWZ_3 |
|
N112-6861W1 |
399.0 |
400.0 |
1.0 |
1.49 |
1.49 |
FWZ_3 |
|
N112-6861W1 |
400.0 |
401.0 |
1.0 |
1.12 |
1.12 |
FWZ_3 |
|
N112-6861W1 |
401.0 |
402.1 |
1.1 |
0.15 |
0.15 |
FWZ_3 |
|
N112-6861W1 |
402.1 |
403.0 |
0.9 |
0.08 |
0.08 |
FWZ_3 |
|
N112-6861W1 |
403.0 |
404.0 |
1.0 |
0.98 |
0.98 |
FWZ_3 |
|
N112-6861W1 |
404.0 |
405.0 |
1.0 |
17.05 |
17.05 |
FWZ_3 |
|
N112-6861W1 |
405.0 |
406.0 |
1.0 |
2.12 |
2.12 |
FWZ_3 |
|
N112-6861W1 |
406.0 |
407.0 |
1.0 |
12.20 |
12.20 |
FWZ_3 |
|
N112-6861W1 |
407.0 |
408.0 |
1.0 |
44.30 |
44.30 |
FWZ_3 |
|
N112-6861W1 |
408.0 |
409.0 |
1.0 |
58.30 |
58.30 |
FWZ_3 |
|
N112-6861W1 |
409.0 |
410.0 |
1.0 |
13.25 |
13.25 |
FWZ_3 |
|
N112-6861W1 |
410.0 |
411.0 |
1.0 |
28.50 |
28.50 |
FWZ_3 |
|
N112-6861W1 |
411.0 |
411.7 |
0.7 |
13.50 |
13.50 |
FWZ_3 |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861W1 |
429.0 |
429.9 |
0.9 |
0.61 |
0.61 |
FWZ_4 |
|
N112-6861W1 |
429.9 |
430.5 |
0.6 |
80.50 |
80.50 |
FWZ_4 |
|
N112-6861W1 |
430.5 |
431.2 |
0.7 |
0.09 |
0.09 |
FWZ_4 |
|
N112-6861W1 |
431.2 |
432.2 |
1.0 |
0.29 |
0.29 |
FWZ_4 |
|
N112-6861W1 |
432.2 |
433.2 |
1.0 |
2.41 |
2.41 |
FWZ_4 |
|
N112-6861W1 |
433.2 |
434.2 |
1.0 |
0.39 |
0.39 |
FWZ_4 |
|
N112-6861W1 |
434.2 |
435.2 |
1.0 |
8.28 |
8.28 |
FWZ_4 |
|
N112-6861W1 |
435.2 |
436.2 |
1.0 |
2.63 |
2.63 |
FWZ_4 |
|
N112-6861W1 |
436.2 |
437.2 |
1.0 |
0.96 |
0.96 |
FWZ_4 |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861W2 |
161.8 |
162.7 |
0.9 |
3.27 |
3.27 |
A Zone |
|
N112-6861W2 |
162.7 |
163.5 |
0.8 |
3.95 |
3.95 |
A Zone |
|
N112-6861W2 |
163.5 |
165.0 |
1.5 |
0.70 |
0.70 |
A Zone |
|
N112-6861W2 |
165.0 |
166.5 |
1.5 |
13.55 |
13.55 |
A Zone |
|
N112-6861W2 |
166.5 |
167.5 |
1.0 |
12.30 |
12.30 |
A Zone |
|
N112-6861W2 |
167.5 |
168.5 |
1.0 |
4.50 |
4.50 |
A Zone |
|
N112-6861W2 |
168.5 |
169.5 |
1.0 |
4.31 |
4.31 |
A Zone |
|
N112-6861W2 |
169.5 |
170.5 |
1.0 |
4.70 |
4.70 |
A Zone |
|
N112-6861W2 |
170.5 |
171.5 |
1.0 |
2.19 |
2.19 |
A Zone |
|
N112-6861W2 |
171.5 |
172.5 |
1.0 |
9.39 |
9.39 |
A Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861W2 |
182.5 |
183.5 |
1.0 |
5.54 |
5.54 |
A1 Zone |
|
N112-6861W2 |
183.5 |
185.0 |
1.5 |
6.04 |
6.04 |
A1 Zone |
|
N112-6861W2 |
185.0 |
186.0 |
1.0 |
0.13 |
0.13 |
A1 Zone |
|
N112-6861W2 |
186.0 |
186.9 |
0.9 |
0.29 |
0.29 |
A1 Zone |
|
N112-6861W2 |
186.9 |
188.3 |
1.4 |
168.00 |
90.00 |
A1 Zone |
|
|
|
|
|
|
|
|
|
Hole No. |
From (m) |
To (m) |
Core Lenght (m) |
Grade (g/t Au) |
Cut Grade (90 g/t Au) |
Name Zone |
|
N112-6861W2 |
252.0 |
253.0 |
1.0 |
1.92 |
1.92 |
FWZ_1 |
|
N112-6861W2 |
253.0 |
254.0 |
1.0 |
0.81 |
0.81 |
FWZ_1 |
|
N112-6861W2 |
254.0 |
255.0 |
1.0 |
374.00 |
90.00 |
FWZ_1 |
|
N112-6861W2 |
255.0 |
256.0 |
1.0 |
2.14 |
2.14 |
FWZ_1 |
|
N112-6861W2 |
256.0 |
256.9 |
0.9 |
0.63 |
0.63 |
FWZ_1 |
Photos accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/1f1935af-e36d-431e-a408-69f858ae48fa
https://www.globenewswire.com/NewsRoom/AttachmentNg/0090700a-e658-4923-96db-2497fd025638
PDF available:
http://ml.globenewswire.com/Resource/Download/bd7bc663-1636-4e4f-85e7-aa1e92490f4a
Wesdome Gold Mines (TSX:WDO)
過去 株価チャート
から 12 2024 まで 1 2025
Wesdome Gold Mines (TSX:WDO)
過去 株価チャート
から 1 2024 まで 1 2025
