Artesyn Announces New Four-Slot Case and Hold-up Module for Second Generation MicroMP Series Configurable AC-DC Power Supplies
2019年4月17日 - 6:00PM
JCN Newswire
HONG KONG, 2019年4月17日 - (Media OutReach) - Artesyn
Embedded Technologies today announced the latest four-slot case and
a new hold-up module for its second generation MicroMP (uMP) series
configurable AC-DC power supplies. Designated uMP09, the new
enclosure supports a maximum power output of 550 watts at 85-180
Vac and 1100 watts and 80-263 Vac. The new hold-up module is
designed for high-reliability applications and enables the supply
to continue providing power for a period of time if the input power
is interrupted.
uMP09 Case
Measuring just 256.9 x 88.9 x 40.0 mm (10.11 x 3.5 x 1.57 inches)
the uMP09 case can be configured using Artesyn's world-class family
of highly efficient, digitally controlled power modules certified
to service a diverse range of applications including industrial,
medical, test and measurement, telecoms, process control and
military and aerospace systems.
Designed to ensure high efficiency and reliability - even in
extreme environmental conditions - the uMP09 is rated for
performance at temperatures from -40 to 70 degrees Celsius. It can
withstand a shock of more than 50 G and meets the MIL-STD-810G
specification for vibration. The calculated mean time between
failures is more than 350,000 hours at full load. Conformal coating
is also available as an option.
The power supply is fully approved to the third edition of the
EN60601-1 and UL ES60601-1 medical safety standards and with 2X
Means of Patient Protection (2XMOPP), it can be used in non-patient
contact and non-patient critical equipment.
Hold Up Module
The new hold-up module for Artesyn's uMP systems is designed to
maintain electronic system operation during extended input bus
drop-out scenarios. This can be important in industrial, military
and aerospace applications. The module is designed to enable
compliance with the SEMI F47 specification, an industry standard
for voltage sag immunity, which says that industrial equipment must
tolerate voltage sags, or dips, on the AC mains supply to specific
depths and durations. While it is a critical requirement for many
semiconductor processing applications, many other industries use
SEMI F47 to benchmark the reliability and productivity of their
equipment.
Artesyn Configurable Power Supplies
The new uMP series is just one line in Artesyn's portfolio of
configurable power supplies, which are renowned for their
outstanding performance and reliability and for being cost
effective. Artesyn's ConfigPro(TM) online power supply configurator
helps customers find the optimal solution from the three million
plus combinations enabled by its range of configurable power
supplies. The ConfigPro tool makes it easier for industrial and
medical equipment designers to specify and use configurable power
supplies and can, in many cases, eliminate the need for expensive
custom solutions.
Artesyn's intuitive GUI-based control software, which can be
downloaded free from www.artesyn.com/power/pmbusgui and used with
Artesyn's configurable power supplies, provides users with superior
flexibility, including real-time input voltage, current and
temperature monitoring to provide at-a-glance performance
confirmation.
Media Contact:
Alice Hui
+852 2176 3548
Alice.Hui@Artesyn.com
Source: Artesyn Embedded Technologies
Copyright 2019 JCN Newswire . All rights reserved.