Oriole Resources
PLC
('Oriole
Resources' or 'Oriole' or 'the Company')
Mbe Exploration
Update:
Wide zones of gold
mineralisation for Phase 2 infill trenching results, and maiden
drilling programme scheduled to commence in
Q4-2024
Oriole Resources (AIM: ORR), the
AIM-quoted gold exploration company focussed on West and Central
Africa, is pleased to provide an exploration update for its
80%[1]-owned Mbe
gold project in the Adamawa region of Cameroon ('Mbe' or the
'Project'), where BCM International Limited
('BCM') has a 10% interest and is currently
funding up to US$4 million on exploration to earn a further
40%.
Mbe is one of five licences within the
Company's broader package of contiguous
exploration licences, the 'Eastern CLP', which covers 2,266 square
kilometres ('km2') of ground
prospective for gold deposits.
Highlights
·
Full channel sampling results from Phase 2 infill
trenching at the MB01 prospect ('MB01' or
the 'Prospect'), specifically the MB01-N and MB01-S targets,
have returned further wide zones of
mineralisation, including:
o 79.00 meters ('m') at 0.43 grammes per tonne ('g/t') gold
('Au'), including 2.00m at 1.60g/t Au and 2.00m at 1.14g/t Au
(trench MBT015, MB01-S target);
o 122.00m at 0.34g/t Au, including 2.00m at 1.17g/t Au, 6.00m at
1.03g/t Au, 2.00m at 1.03g/t Au, and 2.00m at 1.00g/t Au (trench
MBT012, MB01-N target).
·
Phase 2 intersections correlate well with Phase 1
trenching data, outlining a broad, approximately N-S to NNE-SSW
trending, 500m long mineralised corridor at MB01-S, and a NNW-SSE
trending, 450m long mineralised corridor at MB01-N.
·
Re-assayed results from trench MBT004 returned
acceptable quality assurance, quality control ('QAQC') values, with
best additional intersection of 4.00m at 2.00g/t Au. This
completes the reporting of both Phase 1 and 2 trenching data at
Mbe.
·
An independent structural review of the MB01
system by SEMS Exploration shows at least two conjugate extensional
fault and fracture sets influencing the distribution of gold
mineralisation.
·
A fully funded maiden drilling programme is
expected to commence later in Q4-2024. Equipment is currently
being mobilised to site and further details on the programme will
be reported in due course.
Chief Executive Officer of Oriole Resources, Martin Rosser,
said: "We are pleased to have
now reported the final highly encouraging trenching results from
Mbe. They are consistent and correlate well with those from
Phase 1 and are over significant gold mineralised widths.
Excitingly, we are now making all necessary arrangements for the
eagerly awaited start, in this current quarter, of the maiden
drilling programme."
Figure 1. Mineralised intervals from both Phase 1 and
Phase 2 Infill trenching at MB01-S over gold-in-soil anomalies
and superimposed on Maxar satellite image
background.
Figure 2. Mineralised intervals from Phase 1 and Phase 2
Infill trenching at MB01-N over gold-in-soil anomalies
and superimposed on Maxar satellite image
background.
Further Details
Mbe, with a licence area of
312km2, is an orogenic gold project located within the
broader 2,266km2 'Eastern CLP' package of five
contiguous gold-focussed exploration licences in the Adamawa region
in central Cameroon. Since 2022, the Company's systematic
exploration programmes have identified the 3km long,
northeast-trending MB01 prospect, which sits within a wider 12.5km
long zone of gold-in-soil anomalism that trends
east-northeast.
At MB01, increased dilation at the
sites of structural intersections has resulted in enhanced levels
of gold deposition at MB01-N and MB01-S. Gold mineralisation
at these targets comprises high-grade, sulphide-rich quartz veins
and veinlets that occur within, or at the contact with, an
intensely altered felsic unit, which itself is mineralised and
creates wide envelopes of pervasive, lower grade gold
mineralisation.
Results from 4,537 infill soil samples (taken on a
100m x 25m grid, including QAQC) over the whole Prospect,
delivered up to 8,174 parts per billion ('ppb')
(8.17g/t) Au and identified three substantial zones of in-situ gold
mineralisation, the most significant being at MB01-S, where a
greater than 100 ppb Au soil anomaly extends over an area of 1.15km
long by up to 0.75km wide.
Following the infill soil programme
at MB01, two phases of trenching for a total of 7,055m have been
completed. These programmes focused on MB01-N and MB01-S,
where access and ground conditions have allowed:
o A
Phase 1 maiden trenching programme of 5,338m over nine trenches
(MBT001 to MBT009), completed at a spacing of approximately 200m
apart;
o A
Phase 2 infill programme for a further seven trenches (MBT010 to
MBT016), completed for 1,717m, reducing the above spacing to
approximately 100m over key zones of the soil anomalies.
Figure 3. Trench plan showing the location of Phase 1
and Phase 2 trenches at MB01, in relation to gold-in-soil anomalies
at the Prospect, superimposed on Maxar satellite image
background.
Intersections from the Phase 1
trenching programme returned multiple wide zones of mineralisation,
including: 50.00m at 1.11g/t
Au (MBT003); 68.00m at
0.77g/t Au, including 24.00m at 1.18g/t Au (MBT003);
51.00m at 1.02g/t Au and
32.00m at 1.32g/t Au
(MBT007); and 88.00m at 0.71g/t
Au, including 30.00m at 1.18g/t Au and 47.75m at 1.23 g/t Au (MBT008)
(announcements dated 3 September 2024 and 30 September
2024).
The Company today reports results
for a further 1,812 samples (inc. QAQC) related to the Phase 2
infill trenching programme at MB01-N (MBT010 to MBT014) and MB01-S
(MBT015 and MBT016) and 44 samples re-assayed from Phase 1
trenching samples in MBT004, following a review of the QAQC in that
trench. All samples were analysed for gold at Bureau Veritas
in Abidjan, Côte d'Ivoire, using a fire assay with an atomic
absorption spectrometry (AAS) finish. A review of QAQC
confirmed that all data for reported intervals falls within
acceptable limits of error.
Sampling was completed as a
continuous channel, with material being collected from the trench
wall (30-40 centimetres from the trench floor) and from weathered,
in-situ material, to negate contamination from the stone-line or
near surface material. Each sample typically comprised
material composited over 2m intervals, reduced to 1m over visible
mineralised material and taking into account lithological
boundaries.
Significant intersections
(calculated using a 0.20g/t Au lower cut-off grade and with no more
than 35% internal dilution and 5m consecutive dilution) are
presented in Table 1 below, including from MBT004 where 44 samples
were re-assayed (see announcement dated 30 September 2024). All
results presented returned acceptable QAQC results. Best
intersections include: 79.00m at 0.43g/t Au, including 2.00m at
1.14g/t Au and 6.00m at 1.41g/t Au (MBT015); and 122.00m at 0.34g/t Au, including 2.00m at
1.17g/t Au, 6.00m at 1.03g/t Au, 2.00m at 1.03g/t Au, and 2.00m at
1.00g/t Au (MBT012).
Table 1. Calculated intersections for re-assayed samples
from MBT004, and trenches MBT010 to MBT016 using a 0.20g/t Au lower
cut-off grade and no more than 35% internal dilution (and 5m
consecutive). Significant intersections
(≥1g/t Au) are highlighted in bold.
Trench
ID
|
From
(m)
|
To
(m)
|
Grade (g/t
Au)
|
Intersection
|
Phase 1
re-assay
|
MBT004
|
216.00
|
217.00
|
1.33
|
1.00m at
1.33g/t Au
|
|
219.00
|
220.00
|
0.25
|
1.00m at 0.25g/t Au
|
|
223.00
|
227.35
|
2.00
|
4.35m at
2.00g/t Au
|
|
244.00
|
250.00
|
0.24
|
6.00m at 0.24g/t Au
|
Phase 2
infill
|
MBT010
|
62.00
|
64.00
|
5.34
|
2.00m at
5.34g/t Au
|
|
78.00
|
82.00
|
0.29
|
4.00m at 0.29g/t Au
|
|
90.00
|
92.00
|
0.53
|
2.00m at 0.53g/t Au
|
|
114.00
|
123.00
|
0.28
|
9.00m at 0.28g/t Au
|
|
131.00
|
135.00
|
0.26
|
4.00m at 0.26g/t Au
|
MBT011
|
No significant
intersections
|
MBT012
|
21.00
|
30.00
|
0.46
|
9.00m at 0.46g/t Au
|
including
|
21.00
|
22.00
|
1.94
|
1.00m at 1.94g/t Au
|
|
83.00
|
205.00
|
0.34
|
122.00m at 0.34g/t Au*
|
including
|
92.00
|
94.00
|
1.17
|
2.00m at 1.17g/t Au
|
including
|
140.00
|
146.00
|
1.03
|
6.00m at 1.03g/t Au
|
including
|
171.00
|
173.00
|
1.03
|
2.00m at 1.03g/t Au
|
including
|
192.00
|
194.00
|
1.00
|
2.00m at 1.00g/t Au
|
MBT013
|
71.00
|
73.00
|
0.21
|
2.00m at 0.21g/t Au
|
|
86.50
|
88.00
|
0.30
|
1.50m at 0.30g/t Au
|
|
171.00
|
177.00
|
0.47
|
6.00m at 0.47g/t Au
|
|
195.00
|
196.00
|
0.41
|
1.00m at 0.41g/t Au
|
|
236.50
|
238.00
|
0.24
|
1.50m at 0.24g/t Au
|
MBT014
|
112.00
|
115.00
|
0.88
|
3.00m at 0.88g/t Au
|
|
265.00
|
267.00
|
0.34
|
2.00m at 0.34g/t Au
|
MBT015**
|
0.00
|
7.00
|
0.21
|
7.00m at 0.21g/t Au
|
|
13.00
|
16.00
|
0.95
|
3.00m at 0.95g/t Au
|
including
|
14.00
|
15.00
|
2.13
|
1.00m at 2.13g/t Au
|
|
29.00
|
30.40
|
0.24
|
1.40m at 0.24g/t Au
|
|
42.00
|
44.00
|
0.20
|
2.00m at 0.20g/t Au
|
|
48.45
|
53.00
|
0.20
|
4.55m at 0.20g/t Au
|
|
84.00
|
87.00
|
0.22
|
3.00m at 0.22g/t Au
|
|
164.00
|
166.00
|
0.44
|
2.00m at 0.44g/t Au
|
|
179.00
|
258.00
|
0.43
|
79.00m at 0.43g/t Au
|
including
|
209.00
|
211.00
|
1.14
|
2.00m at 1.14g/t Au
|
including
|
231.00
|
232.00
|
1.05
|
1.00m at 1.05g/t Au
|
including
|
250.00
|
251.00
|
1.00
|
1.00m at 1.00g/t Au
|
including
|
254.00
|
256.00
|
1.60
|
2.00m at 1.60g/t Au
|
|
264.00
|
281.00
|
0.33
|
17.00m at 0.33g/t Au
|
MBT016
|
0.00
|
2.00
|
0.20
|
2.00m at 0.20g/t Au
|
|
6.00
|
9.00
|
0.25
|
3.00m at 0.25g/t Au
|
|
28.00
|
29.40
|
1.20
|
1.40m at
1.20g/t Au
|
|
46.00
|
47.00
|
1.47
|
1.00m at
1.47g/t Au
|
|
82.00
|
84.00
|
0.21
|
2.00m at 0.21g/t Au
|
|
134.00
|
135.00
|
0.26
|
1.00m at 0.26g/t Au
|
|
136.00
|
137.00
|
0.20
|
1.00m at 0.20g/t Au
|
*No
samples taken between 86.00 and 88.30m due to removal of material
by artisanal miners; a value of 0g/t Au has been assumed for the
purpose of the interval but the removed material is likely to have
been mineralised.
**Artisanal excavations in this trench led to significant gaps
in sampling as follows: 94-164m, 169-172m and
174-179m.
|
Oriole engaged independent
consultants SEMS Exploration to conduct a structural review of the
MB01 prospect, including two site visits during the trenching
programme. Overall, the report concluded that mineralisation
is primarily associated with infill of two conjugate sets of
faulting and fracturing: a more prevalent set trending NNE-SSW and
NNW-SSE, and a less dominant one trending ENE-WSW and
ESE-WNW.
The best intersection of the Phase 2
infill sampling at MB01-S was 79.00m at 0.43 g/t Au from MBT015,
which correlates well with the previously reported wide and high
grading zones in MBT007 and MBT008. The intersection was
hosted by both felsic intrusions and mafic gneiss within a broadly
N-S to NNE-SSW trending mineralised corridor. Approximately
60m of this trench could not be accessed due to artisanal workings
but the interval is expected to grade when drilled in fresh,
in-situ rock. This is similar to MBT007 (announcement dated 30
September 2024) where missing material is likely to have resulted
in under reporting of the overall interval. At MB01-N, the
best intersection of 122.00m at 0.34g/t Au, including 6.00m at
1.03g/t Au (MTB012) correlated well with the gold-in-soil anomalism
and previously reported intersections with Phase 1 trenches MBT003
and MBT002 to the north and south respectively.
Overall, the results have outlined a
broad approximately N-S to NNE-SSW trending, 500m long mineralised
corridor at MB01-S, and a NNW-SSE trending, 450m long mineralised
corridor at MB01-N.
Following the receipt and
interpretation of both phases of trenching data, a maiden diamond
drilling programme has been planned for commencement later in
Q4-2024. The programme will be fully funded under the earn-in
agreement with BCM. Drilling equipment is currently being
mobilised to site and further details on the programme will be
announced in due course.
For further information on the Mbe
project, including a JORC Table 1, please see the following
page of the Company's website: https://orioleresources.com/projects/central-licence-package/.
Competent Persons
Statement
The technical information in this
release that relates to Exploration Results and the planned
exploration programme has been compiled by Mrs Claire Bay (Executive
Director). Claire Bay
(MGeol, CGeol) is a Competent Person as defined in
the JORC code and takes responsibility for the release of this
information. Claire has reviewed the information in this
announcement and confirms that she is not aware of any new
information or data that materially affects the information
reproduced here.
The information contained within
this announcement is deemed to constitute inside information as
stipulated under the retained EU law version of the Market Abuse
Regulation (EU) No. 596/2014 (the "UK MAR") which is part of UK law
by virtue of the European Union (Withdrawal) Act 2018. The
information is disclosed in accordance with the Company's
obligations under Article 17 of the UK MAR. Upon the
publication of this announcement, this inside information is now
considered to be in the public domain.
For further information please
visit www.orioleresources.com,
@OrioleResources on X, or contact:
Oriole Resources Plc
|
Tel: +44 (0)23 8065 1649
|
Martin Rosser / Bob Smeeton / Claire Bay
|
|
|
|
BlytheRay (IR/PR Contact)
|
Tel: +44 (0)20 7138 3204
|
Tim Blythe / Megan Ray
|
|
|
|
Grant Thornton UK LLP
|
Tel: +44 (0)20 7383 5100
|
Samantha Harrison / Ciara Donnelly /
Elliot Peters
|
SP
Angel Corporate Finance LLP
Ewan Leggat
|
Tel: +44 (0)20 3470 0470
|
Notes to Editors:
Oriole Resources PLC is an
AIM-listed gold exploration company, operating in Central and
West Africa. It is focussed on early-stage exploration
in Cameroon, where the Company has reported a Resource of
375,000oz Au at 2.30g/t in the JORC Inferred category at its
82.2%[2]-owned
Bibemi project and has identified multi-kilometre gold and lithium
anomalism within the district-scale Central Licence Package
project. BCM International is currently earning up
to a 50% interest in the Bibemi and Mbe licences in return for a
combined investment of US$1.5 million in signature
payments, up to US$8 million in exploration expenditure,
as well as JORC resource-based success payments.
At the Senala gold project
in Senegal, AGEM Senegal Exploration Suarl ('AGEM'),
a wholly owned subsidiary of Managem Group, has recently
completed a six-year earn-in to acquire an estimated 59% beneficial
interest in the Senala Exploration Licence by spending US$5.8
million. A review of expenditure and discussions on the
formation of a joint-venture company are currently underway.
The Company also has several interests and royalties in
companies active in East Africa and Turkey that
could deliver future cash flow.