Mumbwa Drilling Results

    RNS Number : 9437D
  AIM Resources Limited
  22 September 2008
   

    AIM RESOURCES LIMITED 

    22 SEPTEMBER 2008

    Mumbwa Drilling Results


    AIM Resources Limited ("the Company") is pleased to provide the following assay results from the current drilling program being
completed on the Mumbwa Joint Venture ("JV") Project in Zambia.  

    The Company received results for hole S36-010, and drill interpreted intersections are presented below. These intersections represent
drilled thickness and are calculated based on "cut off" grades of 0.25% Cu and 0.25g/t Au. True width intersections were not quoted in these
results as additional interpretation is required to correllate data from adjacent drill holes. 

    Results - S36-010
    *     10 metres @ 1.37% Cu between 364 to 374 metres,
    *      including 2 metres @ 3.75 % Cu between 368 to 370metres.
    *     22 metres @ 0.39% Cu; 0.06g/t Au between 388 to 410 metres,
    *      including 14 metres @ 0.46% Cu between 396 to 410 metres,
    *      including 2 metres @ 0.31 g/t Au between 396 to 398 metres.
    *     40 metres @ 0.61% Cu; 0.04g/t Au between 422 to 462 metres,
    *      including 14 metres @ 0.83% Cu between 422 to 436 metres,
    *      including 4 metres @ 1.63% Cu between 426 to 430 metres,
    *      including 18 metres @ 0.65% Cu between 440 to 458 metres,
    *      including 2 metres @ 1.02% Cu between 444 to 446 metres.
    *     18 metres @ 0.25% Cu between 486 to 504 metres,
    *      including 2 metres @ 0.41 % Cu between 501 to 503 metres.
    *     4 metres @ 0.59% Cu between 622 to 626 metres.
    *     12 metres @ 0.55% Cu; 0.12 g/t Au between 642 to 654 metres,
    *      including 2 metres @ 1.23% Cu between 652 to 654 metres,
    *      including 2 metres @ 0.29 g/t Au between 652 to 654 metres.
    *     2 metres @ 0.50% Cu between 827 to 829 metres,
    *      including 1 metre @ 0.83% Cu between 828 to 829 metres.

    Drillhole S36-010 is located in the western side of the target area, and situated approximately 200 metres west from hole S36-001,
drilled during the previous Phase 2 program.

    S36-010 was drilled at an angle of 70 degrees towards the east (090 degrees), for an end of hole depth totalling 866.65 meters. A total
of 316 samples were submitted for preparation and analysis by AH Knight Group of laboratories.

    Diagrams (available on www.aimresources.com.au) display Drillhole S36-010 and the Mumbwa Project area.


 ATTRIBUTION  The information in this report which relates to Exploration
              Results at the Mumbwa JV Project has been reviewed and approved
              for release by Mr Michael J Robertson, MSc, Pr.Sci.Nat., MSAIMM
              who has 20 years experience in mineral exploration, and who is a
              full-time employee of MSA Geoservices, and has sufficient
              experience in relation to the style of mineralisation and type
              of deposit under consideration to qualify as a Competent Person
              as defined by the "Australasian Code for Reporting of
              Exploration Results, Mineral Resources and Ore Reserves" (The
              JORC Code 2004 Edition) and as a Qualified Person under the AIM
              Rules. Mr Robertson has consented to inclusion of this
              information in the form and context in which it appears.

    Note: 
    Gold and copper assays are performed by ISO/17025 accredited Alaska Assay Laboratories (a Member of the Alfred H. Knight Group) in
Alaska, using hot aqua regia atomic absorption spectroscopic (AAS) analyses for copper and conventional fire assay procedures with AAS
finish on 30g aliquots for gold. Multi-element inductively coupled plasma mass spectroscopic (ICP-MS) analyses are currently subcontracted
to ACME Analytical Laboratories Ltd in Vancouver.  

    A Quality Assurance/Quality Control (QA/QC) program forms part of the drilling, sampling and assay program on the Mumbwa Project. This
program includes chain of custody protocol as well as systematic submittal of certified reference materials, duplicates and blank samples
into the flow of samples produced by the drilling.



    Should you require further information please contact:

    Scott Lowe
    Managing Director 
    Ph: + 61 2 9357 9000

    Fiona Owen
    Grant Thornton UK LLP
    Ph: +44 20 7383 5100


    www.aimresources.com.au

This information is provided by RNS
The company news service from the London Stock Exchange
 
  END 
 
DRLLTMPTMMBTMMP
Aim Res. (LSE:AIMR)
過去株価チャート
から 5 2024 まで 6 2024