CA Market News
5日前
GMG Delivers Its First Ever Bulk Shipment of THERMAL-XR(R) to Nu Calgon in the USAJune 17, 2026 8:00 AM
NewsfileBrisbane, Queensland--(Newsfile Corp. - June 17, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce that the Company has shipped its first ever bulk order of THERMAL-XR® to its exclusive North American distributor, Nu Calgon Wholesaler, Inc. ("Nu Calgon") which is marketed and sold as "Nu-Calgon CoolWorx® powered by GMG® Graphene" as seen in an example shown in Figure 1. As previously disclosed, GMG is authorised to export, distribute, sell, use and dispose of graphene coating across multiple industries in the United States in accordance with its pre-manufacture notice P-25-0018.Figure 1: Nu-Calgon CoolWorx® Powered by GMG® Graphene LabelTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/301834_926570a474fba95b_001full.jpgDeWight Wallace, Nu-Calgon's President, commented: "We are very excited to receive this first shipment of THERMAL-XR® and to begin introducing it to the North American HVAC-R market. GMG's graphene technology offers contractors a genuine, measurable energy-saving solution, and we look forward to deploying it across our distribution network. This is exactly the kind of innovative product our customers are looking for. We also look forward to welcoming Craig and members of his team to our headquarters in St Louis to spend valuable time together planning for our future partnership." Craig Nicol, CEO & Managing Director of the Company, commented: "Delivering our first bulk shipment of THERMAL-XR® to Nu Calgon is a genuinely significant moment for GMG. This order marks the transition from development and approval to commercial reality in the world's largest HVAC-R market. Receiving EPA authorisation to export and sell our graphene-based product in the United States is something very few companies have achieved, and we are proud to be bringing that technology to market alongside a distributor of Nu Calgon's calibre."Jack Perkowski, Chairman and Non-Executive Director of the Company, commented: "This first shipment is a milestone we have been working toward for some time, and it reflects the strength of what GMG has built. EPA approval for the unrestricted export and sale of a graphene-based coating in the United States is a rare and hard-won achievement. Paired with Nu Calgon's reach across North America, we now have the foundation to scale THERMAL-XR® in a market that we believe will define GMG's next phase of commercial growth."About THERMAL-XR®:
THERMAL-XR® ENHANCE coating system is a unique method of improving the conductivity of corroded heat exchange surfaces and improving and maintaining the performance of new units at peak levels. The process coats and protects heat exchange surfaces while improving and rebuilding the lost corroded thermal conductivity and increasing the heat transfer rate by leveraging the physics of GMG Graphene, resulting in an efficiency improvement and a potential power reduction. THERMAL-XR® ENHANCE is now patented for 20 years in Australia and is expected to be patented in other countries around the world.About Nu-Calgon:
Nu-Calgon supplies a complete line of specialty chemical products for the HVAC-R aftermarket that includes coil cleaners, leak sealants, air purifiers and refrigeration oils, water treatment, ice machine maintenance, and other specialty applications. These products are marketed to air conditioning, heating, refrigeration, and plumbing wholesalers, food service/restaurant suppliers and OEMs. www.nucalgon.comNu-Calgon has dedicated factory sales professionals located across the United States and Canada, providing many years of sales and product experience. A state-of-the-art order entry system accesses the Nu-Calgon inventory at the centralised distribution center, enabling prompt, accurate order processing and complete order shipment within 24 hours. About GMG:
GMG is an Australian-based clean-technology company that develops, manufactures and sells energy-saving and energy-storage solutions, enabled by graphene produced via its in-house production process. GMG uses its proprietary process to decompose natural gas (i.e., methane) into its natural elements — carbon (as graphene), hydrogen, and some residual hydrocarbon gases. This process produces high-quality, low-cost, scalable, tuneable, and low- to no-contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities and to secure market applications. In the energy savings segment, GMG has initially focused on a graphene-enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating), which is now being marketed into other applications including electronic heat sinks, industrial process plants, and data centres. GMG has also developed a graphene lubricant additive focused on saving liquid fuels, initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively, with financial support from the Australian Government, to progress R&D and commercialisation of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking Statements
This news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes", "expects" or "anticipates", or variations of such words and phrases, or statements that certain actions, events or results "may", "could", "should", "would", or "will" "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include, without limitation: THERMAL-XR® being one of the longest lasting corrosion protection coatings available, THERMAL-XR® being a genuine, measurable energy-saving solution and Nu Calgon's intentions of deploying it across its distribution network, GMG's intention to progress its broader US commercialisation activities across its graphene product portfolio, Nu Calgon's reach across North America and its ability to serve as a foundation to scale THERMAL-XR®, GMG's intentions to develop commercial scale-up capabilities, GMG's focus in the energy savings segment, GMG's intentions for the use of graphene lubricant additive on saving liquid fuels, expectations for R&D and commercialization of G+AI Batteries, GMG's ability to improve the performance of lithium-ion batteries and GMG's critical business objectives.Such forward-looking statements are based on a number of assumptions of management. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors that may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation, the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025, available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial outlook that are incorporated by reference herein, except as required by applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/301834 Original: GMG Delivers Its First Ever Bulk Shipment of THERMAL-XR(R) to Nu Calgon in the USA
CA Market News
3週前
GMG Applies for Additional Environmental Approvals to Produce Graphene in USAJune 2, 2026 7:40 AM
NewsfileBrisbane, Queensland, Australia--(Newsfile Corp. - June 2, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce that the Company has submitted an additional application to the United States Environmental Protection Agency ("EPA") for the manufacture and sale of graphene and graphene coatings (THERMAL-XR®), lubricants (G® LUBRICANT) and other graphene fluids in the United States.GMG has submitted a Significant New Use Notice ("SNUN") to the US EPA under pre-manufacture notice (PMN) P-25-0018. Under this application, GMG is seeking authorisation to manufacture, distribute, sell, use and dispose of graphene and graphene coatings, lubricants and fluids across multiple industries in the United States. GMG expects to obtain this approval by the end of June 2027.This application is in addition to the existing approval under PMN P-25-0018, which authorises the Company to export, distribute, sell, use and dispose of graphene coatings across multiple industries in the United States.Craig Nicol, CEO & Managing Director of the Company, commented: "Submitting the SNUN is a decisive step in our US strategy. This application, if approved, will grant GMG the authorisation to manufacture graphene domestically in the United States — not simply to export into the market, but to produce within it. That distinction matters. It positions GMG to serve US customers at scale, deepen our industrial footprint, and build a genuinely American supply chain for graphene-enabled products. We expect EPA approval by the end of June 2027 and are planning our commercial operations accordingly."Jack Perkowski, Chairman and Non-Executive Director of the Company, commented: "The United States is the most important market in the world for what GMG is building. This SNUN filing reflects our commitment to America — not just as a customer base, but as a centre of production, capital formation, and long-term growth. We are looking to the US to drive the next chapter of GMG's commercial expansion."About THERMAL-XR®:THERMAL-XR® ENHANCE coating system is a unique method of improving the conductivity of corroded heat exchange surfaces and improving and maintaining the performance of new units at peak levels. The process coats and protects heat exchange surfaces while improving and rebuilding the lost corroded thermal conductivity and increasing the heat transfer rate by leveraging the physics of GMG Graphene, resulting in an efficiency improvement and a potential power reduction. THERMAL-XR® ENHANCE is now patented for 20 years in Australia and is expected to be patented in other countries around the world.About G® LUBRICANT:G® LUBRICANT is what management believes to be a transformative graphene liquid concentrate additive designed to enhance the performance of diesel and gasoline (petrol) engines. This product has the potential to reshape the future of the global liquid fuels industry and offers an innovative solution that optimises efficiency and power for stationary or mobile engines. G® LUBRICANT, a graphene liquid concentrate that can be added to any mineral or synthetic oil used in an internal combustion engine in a 1:100 dosage, has been verified by the University of Queensland to increase fuel efficiency by up to 8.4% in a diesel engine, as announced in February 2025.1 G® LUBRICANT is now patented for 20 years in Europe, the US, and China.1RSU GrantsThe Company is also pleased to announce that following the annual remuneration review, its Board of Directors have approved the grant of an aggregate of 783,590 Restricted Share Units ("RSUs") to employees and directors of the Company pursuant to its Restricted Share and Performance Share Plan and the Stock Option Plan.When vested, each RSU entitles the holder thereof to receive one Share upon exercise in accordance with the Plan. The holder at their own discretion, and separately to the Company, may action those shares accordingly for their personal use.About GMG:GMG is an Australian-based clean-technology company that develops, manufactures and sells energy-saving and energy-storage solutions, enabled by graphene produced via its in-house production process. GMG uses its proprietary process to decompose natural gas (i.e., methane) into its natural elements — carbon (as graphene), hydrogen, and some residual hydrocarbon gases. This process produces high-quality, low-cost, scalable, tuneable, and low- to no-contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities and to secure market applications. In the energy savings segment, GMG has initially focused on a graphene-enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating), which is now being marketed into other applications including electronic heat sinks, industrial process plants, and data centres. GMG has also developed a graphene lubricant additive focused on saving liquid fuels, initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively, with financial support from the Australian Government, to progress R&D and commercialisation of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes", "expects" or "anticipates", or variations of such words and phrases, or statements that certain actions, events or results "may", "could", "should", "would", or "will" "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include, without limitation: GMG's ability to obtain EPA authorisation to manufacture, distribute, sell, use and dispose of graphene and graphene coatings, lubricants and fluids across multiple industries in the United States; GMG's expectation to obtain SNUN approval by the end of June 2027; and GMG's intention to progress its broader US commercialisation activities across its graphene product portfolio; GMG's intentions to develop commercial scale-up capabilities, GMG's focus in the energy savings segment, GMG's intentions for the use of graphene lubricant additive on saving liquid fuels, expectations for R&D and commercialization of G+AI Batteries, GMG's ability to improve the performance of lithium-ion batteries and GMG's critical business objectives.Such forward-looking statements are based on a number of assumptions of management, including the receipt of EPA approval of the SNUN filing. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors that may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation, that GMG does not receive, or does not receive on a timely basis, EPA approval of the SNUN, and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025, available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial outlook that are incorporated by reference herein, except as required by applicable securities laws.1 GMG, "GMG Unveils G® LUBRICANT Engine Performance Testing Results," February 2025, https://graphenemg.com/gmg-unveils-g-lubricant-engine-performance-testing-results-a-transformative-graphene-energy-saving-solution-for-the-multi-trillion-dollar-global-liquid-fuel-industry/To view the source version of this press release, please visit https://www.newsfilecorp.com/release/299808 Original: GMG Applies for Additional Environmental Approvals to Produce Graphene in USA
CA Market News
1月前
GMG's THERMAL-XR(R) to be Applied Exclusively & Distributed to Global Oil and Gas/LNG Industry with Curran InternationalMay 19, 2026 8:05 AM
NewsfileBrisbane, Queensland, Australia--(Newsfile Corp. - May 19, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce the signing of a global distribution agreement with Curran International for THERMAL-XR® and for exclusive application services for the product oil and gas/LNG industry. Curran International is a global leader in providing heat transfer technologies to some of the world's largest oil and gas companies. Curran International has completed work for the following companies: Exxon Mobil, BP, Philips 66, Chevron, Shell, Marathon, Citgo, Aramco, Total, Sabic, Motiva, Reliance, ONGC, HMEL, Cenovus, Suncor Energy and Satorp. Curran International (https://curranintl.com/) has various field service teams located in Houston, Texas USA; Edmonton, Alberta, Canada; Jubail, Saudi Arabia; Rotterdam, Netherlands; Gujarat, India; and Singapore. Curran International has completed over 250,000 projects around the world over the past 45 years, safely providing heat transfer equipment solutions.To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/297942_2433db0e34c91b7a_001full.jpgEd Curran, CEO of Curran International, commented "We look forward to working with GMG and bringing GMG's THERMAL-XR® graphene coating technology to our existing and new clients. The combination of additional heat transfer properties and high corrosion resistance makes THERMAL-XR® a very compelling proposition for the Oil and Gas/LNG Industry."Craig Nicol, CEO & Managing Director of the Company, commented "We look forward to working with Ed and his amazing team at Curran International - they have built up a broad range of technologies and services over many years in servicing one of the largest industries and we are pleased to be able to add THERMAL-XR® to this range." Jack Perkowski, Chairman and Non-Executive Director of the Company, commented: "This arrangement with Curran International is a significant step in GMG's global commercialisation strategy for THERMAL-XR®. Gaining access to Curran International's established relationships with the world's leading oil and gas and LNG companies — including ExxonMobil, BP, Shell, Chevron, and Saudi Aramco — provides GMG with immediate reach into one of the most demanding and high-value industrial sectors in the world. The fact that a specialist with over 45 years of experience and more than 250,000 completed projects has chosen THERMAL-XR® as a core part of its offering is a strong validation of the technology's performance and commercial potential. We see this as a meaningful step in building the substantial recurring revenue base that will drive long-term value for GMG shareholders."To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/297942_2433db0e34c91b7a_002full.jpgAbout THERMAL-XR® ENHANCE powered by GMG Graphene: THERMAL-XR® ENHANCE coating system is a unique patented product and method of improving the conductivity of heat exchange surfaces (including for air conditioners, refrigeration systems, heat pumps and data centres) and improving and maintaining the performance of new units at peak levels. The process coats and protects heat exchange surfaces from corrosion (successfully passed up to 20,000 hours of salt sea spray corrosion testing) while improving the corroded thermal conductivity and increasing the heat transfer rate by leveraging the physics of GMG Graphene, resulting in an efficiency improvement and a potential power reduction.About GMG:
GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes" "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include without limitation, THERMAL-XR® coating, applied or distributed by Curran International and or to the oil and gas/LNG industry, the significance of the relationship with Curran International to GMG's commercialization strategy and progress towards recurring revenue the energy savings, anti-corrosion and extension of asset life attributes of THERMAL-XR®, the ability of GMG's energy savings products to build a revenue base, GMG's intentions to develop commercial scale-up capabilities, GMG's focus in the energy savings segment, GMG's intentions for the use of graphene lubricant additive on saving liquid fuels, expectations for R&D and commercialization of G+AI Batteries, GMG's ability to improve the performance of lithium-ion batteries and GMG's critical business objectives.Such forward-looking statements are based on a number of assumptions of management, including the performance improvement and corrosion resistance of heat exchangers in the oil and gas/LNG industry. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation that GMG does not receive or receive on a timely basis the fully signed consent notice from the and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/297942 Original: GMG's THERMAL-XR(R) to be Applied Exclusively & Distributed to Global Oil and Gas/LNG Industry with Curran International
CA Market News
1月前
GMG Leases New Site for Production & Office ExpansionMay 12, 2026 8:01 AM
NewsfileBrisbane, Queensland, Australia--(Newsfile Corp. - May 12, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce that the Company has signed a 3 year lease, with options for term extension, to support production expansion and to provide additional office space for staff. The site is within the Richlands suburb of Brisbane, nearby to the existing headquarters of the Company. The site has over 2,100 square metres of covered space — including offices, meeting rooms and a high ceiling warehouse. Craig Nicol, CEO & Managing Director of the Company, commented "This is the first site for expansion for our company — for both staff and production assets. We will look to expand our production assets here after the Gen 2 Project is completed — which is expected at the end of June 2026."Jack Perkowski, Non-Executive Chairman and Director of the Company, commented: "As we look to expand our production plants around the world — this is the first significant step in our global growth plan."Operations UpdateGMG is focused on delivering its Gen 2.0 Graphene Production Project (the "Gen 2.0 Project") by end of June 2026 — which is expected to produce at least 10 tonnes per annum of graphene at its headquarters in Richlands, Queensland, Australia. Once the Gen 2.0 Project is commissioned and operating, GMG plans to replicate and establish other production plants around the world to enable scaled production for potential sales, diversify and lower production risks, and reduce operating costs by locating the plant in countries with lower operating costs, including low cost natural gas — one of GMG's key production input costs.Currently, GMG is planning three potential expansion projects — two in North America (potentially one in US and one in Canada) in addition to an expansion production project in Australia (located on the expansion lease outlined in this release). GMG proposes to mature these projects and expand production in line with sales for all of its products.The expansion program for GMG includes the following 5 production plants:Graphene Production (from natural gas)Coating Blend Plant (for the graphene coating THERMAL-XR®)Lubricant Blend Plant (for the graphene lubricant additive G® LUBRICANT)Graphene Slurry Plant (for the SUPA G Lithium-Ion Battery Additive)Battery Assembly Plant (for the Graphene Aluminium Ion Battery)Figure 1To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/297118_53e7bb85547cbaac_001full.jpgAbout GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes" "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include without limitation, statements as to GMG's focus on, and the timing and production expectations of, the Gen 2 Project, intentions regarding the number, purpose and location of expansion projects, intentions to de-risk, reduce operating costs and develop commercial scale-up capabilities, GMG's focus in the energy savings segment, GMG's intentions for the use of graphene lubricant additive on saving liquid fuels, expectations for R&D and commercialization of G+AI Batteries, GMG's ability to improve the performance of lithium-ion batteries and GMG's critical business objectives.Such forward-looking statements are based on a number of assumptions of management, including the patent and potential market size of G® LUBRICANT. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation that GMG does not receive or receive on a timely basis the fully signed consent notice from the and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/297118 Original: GMG Leases New Site for Production & Office Expansion
CA Market News
1月前
GMG's THERMAL-XR to Be Applied on up to 600 Air Conditioners for Two Luxury Towers in AustraliaMay 11, 2026 8:06 AM
NewsfileBrisbane, Queensland, Australia--(Newsfile Corp. - May 11, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce GMG's energy saving and anti-corrosion graphene coating solution, THERMAL-XR, is being applied to the air conditioners for two luxury towers in Australia currently under construction at the Gold Coast in Queensland (the "Project"). The Project includes spraying THERMAL-XR on a total of between 300 to 600 air conditioners, see Figure 1 showing how the THERMAL-XR is sprayed on the air conditioners in GMG's spray booth facility in Brisbane Queensland.Figure 1: Spray Booth and Curing Area for Air Conditioners for ProjectTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/296885_3b33c46414878a4d_001full.jpgCraig Nicol, CEO & Managing Director of the Company, commented "Great to see two of the largest towers in Australia using THERMAL-XR on their air conditioners to save energy for the apartment owners and tenants as well as limiting corrosion and extending the air conditioners' life." Jack Perkowski, Non-Executive Chairman and Director of the Company, commented: "This project is a great demonstration of the commercial momentum THERMAL-XR is building in the Australian market. Seeing our graphene coating applied to up to 600 air conditioners across two of Australia's most prestigious luxury towers is a significant milestone - not only for the energy savings and extended asset life it is expected to deliver to apartment owners and tenants, but as a compelling proof point for the broader HVAC-R industry. Projects of this scale highlight the real-world value that GMG's technology brings and reinforce our path to building a substantial revenue base from our energy savings products."Figure 2To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/296885_gmgfigure2.jpgAbout THERMAL-XR® ENHANCE powered by GMG Graphene: THERMAL-XR® ENHANCE coating system is a unique patent product and method of improving the conductivity of heat exchange surfaces (including for air conditioners, refrigeration systems, heat pumps and data centres) and improving and maintaining the performance of new units at peak levels. The process coats and protects heat exchange surfaces from corrosion (successfully passed up to 20,000 hours of salt sea spray corrosion testing) while improving the corroded thermal conductivity and increasing the heat transfer rate by leveraging the physics of GMG Graphene, resulting in an efficiency improvement and a potential power reduction. About GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes" "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include without limitation, THERMAL-XR coating on the Project's air conditioners, the energy savings, anti-corrosion and extension of asset life attributes of THERMAL-XR, the momentum THERMAL-XR is experiencing in Australia, the ability of GMG's energy savings products to build a revenue base, GMG's intentions to develop commercial scale-up capabilities, GMG's focus in the energy savings segment, GMG's intentions for the use of graphene lubricant additive on saving liquid fuels, expectations for R&D and commercialization of G+AI Batteries, GMG's ability to improve the performance of lithium-ion batteries and GMG's critical business objectives.Such forward-looking statements are based on a number of assumptions of management, including the coating of air conditioners on Meriton's two towers. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation that GMG does not receive or receive on a timely basis the fully signed consent notice from the and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/296885 Original: GMG's THERMAL-XR to Be Applied on up to 600 Air Conditioners for Two Luxury Towers in Australia
CA Market News
2月前
GMG Appoints New Chief Production Growth Officer and Provides Update on Global Production PlansApril 22, 2026 7:38 AM
NewsfileBrisbane, Queensland, Australia--(Newsfile Corp. - April 22, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce that Stuart Watson — former global Head of Technical Development for Rio Tinto Ltd. (ASX: RIO), one of the largest mining and mineral production companies in the world, has joined GMG as Chief Production Growth Officer.Stuart has over 30 years of global leadership experience in metals and mining and oil and chemicals, including 20 years at Rio Tinto, across operations, sales and marketing, mergers and acquisitions, and technology development and innovation. Career highlights include: Leading and delivering multiple major transformation programs valued over US$5 Billion and merger and acquisition deals valued at US$1 Billion.Directing US$1 Billion in global technology and research & development spend to create breakthrough growth options and projectsBuilding high-performing global teams across Asia, Europe, and North AmericaStuart has a Master of Business Administration (MBA) - Henley Management College, UK; is a Chartered Engineer - Institute of Chemical Engineers (IChemE), has a Masters of Engineering, Chemical Engineering (First Class Honours) — Imperial College, University of London and Ecole Nationale Supérieure d'Ingénieurs de Génie Chimique (ENSIGC), Toulouse, France.Craig Nicol, CEO & Managing Director of the Company, commented "We welcome Stuart to the GMG team - he is a great addition to the Senior Executive Team for both executive leadership and delivery capability. I will enjoy working with Stuart to expand our production across our graphene and graphene products around the world."Jack Perkowski, Non-Executive Chairman and Director of the Company, commented: "On behalf of the board I welcome Stuart to the team and look forward to the progress around expanding our production capability into North America."Operations UpdateGMG is focused on delivering its Gen 2.0 Graphene Production Project (the "Gen 2.0 Project") by end of June 2026 — which is expected to produce at least 10 tonnes per annum of graphene at its headquarters in Richlands, Queensland, Australia. Once the Gen 2.0 Project is commissioned and operating. GMG plans to replicate and establish other production plants around the world to enable scaled production for potential sales, diversify and lower production risks, and in the end, reduce operating costs by locating the plant in countries with lower operating costs, including low cost natural gas — one of GMG's key production input costs.Currently, GMG is planning three potential expansion projects — two in North America (potentially one in US and one in Canada) in addition to an expansion production project in Australia. GMG proposes to mature these projects and expand production in line with sales for all of its products.The expansion program for GMG includes the following 5 production plants:Graphene Production (from natural gas)Coating Blend Plant (for the graphene coating THERMAL-XR®)Lubricant Blend Plant (for the graphene lubricant additive G® LUBRICANT)Graphene Slurry Plant (for the SUPA G Lithium-Ion Battery Additive)Battery Assembly Plant (for the Graphene Aluminium Ion Battery)Figure 1To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/293781_d1c07d1d84356a2d_001full.jpgAbout GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes" "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include without limitation, statements as to GMG's focus on, and the timing and production expectations of, the Gen 2 Project, intentions regarding the number, purpose and location of expansion projects, intentions to de-risk and develop commercial scale-up capabilities, GMG's focus in the energy savings segment, GMG's intentions for the use of graphene lubricant additive on saving liquid fuels, expectations for R&D and commercialization of G+AI Batteries, GMG's ability to improve the performance of lithium-ion batteries and GMG's critical business objectives..Such forward-looking statements are based on a number of assumptions of management, including the patent and potential market size of G® LUBRICANT. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation that GMG does not receive or receive on a timely basis the fully signed consent notice from the and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/293781
Original: GMG Appoints New Chief Production Growth Officer and Provides Update on Global Production Plans
delerious1
2月前
GMG's Graphene Engine Oil Additive G(R) LUBRICANT: Patent Granted in USA; Allowed in China
April 20 2026 - 12:40PM
Newsfile
Alert
Print
Share On Facebook
Brisbane, Queensland, Australia--(Newsfile Corp. - April 20, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to advise that GMG's patent for GMG's Graphene Engine Oil Additive, G® LUBRICANT, has now been granted for 20 years in the USA and allowed in China. This is in addition to the previously announced G® LUBRICANT patent accepted for the European region. There are various other countries around the world where this patent application is progressing as well, which are shown in Figure 1.
Figure 1: World Map of G® LUBRICANT Patent Progress
About G® LUBRICANT: G® LUBRICANT is what management believes to be a transformative graphene liquid concentrate additive designed to enhance the performance of diesel and gasoline (petrol) engines. This product has the potential to reshape the future of the global liquid fuels industry and offers an innovative solution that optimizes efficiency and power for stationary or mobile engines. G® LUBRICANT, a graphene liquid concentrate that can be added to any mineral or synthetic oil used in an internal combustion engine in a 1:100 dosage, has been verified by the University of Queensland to increase fuel efficiency by up to 8.4% in a diesel engine as announced in February 2025. [1]
The amount of graphene in the final engine oil once G® LUBRICANT is mixed in is only ~ 1:10,000. As a result, G® LUBRICANT can be used safely in any internal combustion engine. Over the past four years, GMG has conducted environmentally controlled testing of G® LUBRICANT in internal combustion engines monitored and verified by The University of Queensland. GMG's test results have been corroborated by similar savings realized by customers over a number of years of field testing.
US$ 1.4 Trillion Global Diesel Industry
Whilst G® LUBRICANT can be used to reduce fuel consumption in both diesel and gasoline/petrol engines GMG intends to focus on the diesel market initially, which is largely B2B focused, and therefore, more targeted as far as fuel cost savings and performance. GMG calculates, prior to the recent increase in diesel prices, that global diesel fuel sales totaled US$1.4 Trillion per annum[2] including taxes and duties on approximately 28 million barrels of diesel per day as detailed by the US Energy Information Administration2. Figure 3 shows the top 34 countries in the world with diesel fuel sales greater than US$10 Billion per annum.
Figure 2: Total Diesel Fuel Sales in 2025 US$ Billion
Estimated US$ 1.2 Billion Per Annum Global Diesel Market For G® LUBRICANT
Assuming an average fuel savings of 8.4%, GMG believes that a conservative estimate of the potential market for G® LUBRICANT is 10% of the fuel savings realized by users annually. Assuming G® LUBRICANT pricing equal to 10% of the savings realized, GMG estimates that the potential global revenue for G® LUBRICANT is US$ 1.2 Billion sales per annum based on 2025 actual sales. Figure 3 shows GMG's estimates of potential annual sales of G® LUBRICANT by country.
Figure 3: Total G® LUBRICANT Sales Opportunity based off 2025 Total Diesel Fuel Sales
Craig Nicol, CEO & Managing Director of the Company, commented "This is great progress to secure the valuable graphene lubricant patent for engine oil use in the major markets of Europe, China and the USA."
Jack Perkowski, Chairman and Non-Executive Director of the Company, commented: "Congratulations to the team on progressing further with building their competitive position in securing patents in the most valuable markets for G® LUBRICANT".
About GMG:
GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.
The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.
In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.
GMG's 4 critical business objectives are:
Produce Graphene and improve/scale cell production processes
Build Revenue from Energy Savings Products
Develop Next-Generation Battery
Develop Supply Chain, Partners & Project Execution Capability
For further information please contact:
Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223
Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.
CA Market News
2月前
GMG Doubles Energy Density of 6 Minute Charging Graphene Aluminium-Ion BatteryApril 15, 2026 7:30 AM
NewsfileBrisbane, Australia--(Newsfile Corp. - April 15, 2026) - Graphene Manufacturing Group Ltd. (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to provide the latest progress update on the Graphene Aluminium-Ion Battery technology ("G+A CELLS") being developed by GMG and the University of Queensland ("UQ") under a Joint Development Agreement with Rio Tinto, one of the world's largest metals and mining groups, and with the support of the Battery Innovation Center of Indiana ("BIC") in the United States of America. The GMG G+A CELLS have now demonstrated superior performance characteristics when compared to a representative market leading ultra-fast charging batteries, the Lithium Titanate Oxide ("LTO") batteries, which can be sold at a premium price of up to US$1200/kWh.1 Figure 1 shows the current energy density of G+A CELLS, based on BIC testing, and shows the doubling in performance (26 to 49 Wh/kg) since the previous announcement in December 20252 and in comparison, to a representative market leading fast charging high power LTO batteries.Figure 1: Increase in Energy Density for G+A CELLS since December '25 UpdateTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_figure1.jpgFigure 2 shows the charge and discharge curves for the G+A CELLS when charged in 6 minutes (10C) and 60 minutes (1C). The energy density of the cells for the G+A CELLS when charged in 60 minutes (1C) is now 101 Wh/kg when charging to 100% State of Charge (SOC) which is an increase from 58 Wh/kg from the previous update. This shows the G+A CELLS have a nominal voltage of approximately 3.2 Volts (an increase from 3.0 Volts in the previous update). The G+A CELLS maintained performance over hundreds of cycles at 6-minute fast charging rate (10C). Figure 2: Battery performance curves of G+A CELLS at 60 min and 6min charge (1C & 10C)To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_001full.jpgBob Galyen, GMG Non-Executive Director and former CTO of CATL - the largest battery manufacturer in the world, commented: "With the possibility of charging from empty to full in around six minutes, this chemistry fundamentally changes how designers can think about electric vehicles, consumer electronics, and stationary storage. Instead of planning around long charge stops with large packs, engineers can optimise for rapid energy turnaround, with higher power, and safer, with GMG's battery made from abundant raw materials. Lithium-ion will remain a key part of the energy landscape for years to come, but its limitations in fast charging, temperature tolerance, and critical-mineral supply are increasingly evident. By leveraging aluminium and graphene, the GMG team is demonstrating a pathway to reduce reliance on traditional lithium-based systems and or combinatorial systems with multiple battery technologies while delivering step-change improvements in charge time and power density. This is not an incremental tweak to existing cells - it is a new platform that can open markets and use cases that were previously uneconomic or impractical. The companies that adapt quickest to this shift will lead the next wave of electrification, and GMG intends to be at the centre of that transition with graphene aluminium-ion technology."Standard commercial Lithium Nickel Manganese Cobalt ("LNMC") and Lithium Iron Phosphate ("LFP") battery cells for electric vehicles and stationary storage are NOT designed for continuous 6-minute charging (10C); typical recommended charge rates are ≤1 hour (1C), often 2 hours (0.5C), with only limited fast charge operation. Only specialized high-power cell designs like LTO battery cells can tolerate charge rates of 6 minutes (10C).3 GMG has now developed a completely new hybrid electrolyte that is chloride free and non-corrosive, unlike common aluminium battery electrolytes, along with a complex cathode and anode technology that enables very stable fast charging over hundreds of cycles. The substrate for both the cathode and anode in the G+A CELLS is aluminium foil - which provides significant cost and weight savings compared with copper, the substrate material used in most lithium and sodium-ion batteries. GMG's technology does not include the use of lithium or copper. The Company has submitted an additional patent application covering these new developments.GMG believes that it has significantly met the key target specification requirements for use in heavy mobile equipment, as shown in Figure 3, its main targeted use case, including:- Charging in under 6 minutes;
- Energy density > 100 Wh/kg after 1 hour of charging; and
- Safe (no Lithium).The next battery development steps include the following activities:- Test and show cycle life up to 10,000 cycles
- Test and show ambient temperature impacts
- Test and show standard safety testing
- Test and show no thermal battery management system needed Figure 3: G+A CELLS Battery Use Case - heavy mobile equipmentTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_figure3.jpgCraig Nicol, GMG Managing Director and CEO, commented: "This is a significant step up from where we were at with battery performance in December 2025 and we see the required performance for our targeted use case being largely met - which means we can start to put together the next stages of the battery maturation program - including partnerships and manufacturing plans."GMG management believes that the G+A CELLS can eventually achieve over 160 Wh/kg when charged in 1 hour, and over 80 Wh/kg when charged in 6 minutes with further development of the cathode, anode, electrolyte and component weights.Figure 4 shows the latest G+A CELLS in pouch format:Figure 4: Current Multi-Layer G+A CELLTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_figure4.jpgBattery Technology Readiness Level
The battery technology readiness level ("BTRL") of the G+A CELLS remains at Level 4, whilst significantly progressed through this level as shown in Figure 5. GMG is currently in the process of completing the optimization of the electrochemical behaviour for the pouch cells via ongoing laboratory experimentation. Through collaboration with BIC, it is anticipated that the battery technology readiness will ultimately progress to BTRL 7 and 8 since the equipment and processes needed to produce the G+A CELLS are the same as those employed to make Lithium-Ion Batteries, though no definitive timeline for achievement can be provided at this time.Figure 5: Battery Technology Readiness Level (BTRL)To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_004full.jpgThe Company is confident it can meet the overall timeline, as seen in Figure 6, of its battery cell roadmap that calls for testing of cells with customers in 2026 and small commercial production with support of various partners, including BIC, in 2027.Figure 6: Battery Cell RoadmapTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_005full.jpgNext Steps Toward Commercialisation & Market ApplicationsJack Perkowski, GMG Non-Executive Chairman and Director, commented: "I am extremely proud that GMG has progressed its battery to this stage - the Company is getting very close to final commercialisation steps. We look forward to providing further updates as GMG progresses the development of its battery technology."The Company continues to see a broad range of potential applications for a completed G+A CELLS - utilising its ultra-high power-density and economic energy density characteristics. Along with Rio Tinto, a range of global companies have confidentially expressed their interest in working with GMG in the following vertical sectors:Figure 7: Market ApplicationsTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_006full.jpgCurrently, GMG believes it will use a plastic battery pack design, similar to Figure 8, to hold the battery pouch cells - reducing the weight, cost and complexity relative to using a metal case. Using a plastic battery pack is possible for two main reasons - GMG believes that its battery will not require a thermal management system or the fireproofing precautions provided by the metal case in a lithium-ion battery. Using plastic will increase the comparative energy density of G+A CELL packs when compared to lithium-ion batteries.Figure 8: Expected Battery Pack for GMG's G+A CELLS Pouch FormatTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_9a72ca9bb4963a29_007full.jpgComparison and Market Review: LTO Batteries As shown in Figure 9 below, the performance of GMG's G+A CELL technology is already very similar to representative LTO batteries.Figure 9: Comparison of GMG's G+A CELLS to Lithium Titanate Oxide (LTO) BatteryTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/292641_figure9.jpg LTO batteries are sold at a premium to LFP and LNMC batteries, which are the main chemistries used in electric vehicles and energy storage systems, and are also widely used in other electronic applications due to their high performance and long cycle life. The material and manufacturing costs for G+A CELLS are expected to be similar to, or less than, the cost to manufacture standard lithium-ion batteries, but substantially lower than the costs to produce LTO batteries.LTO batteries have energy density ranging from 50 - 80 Wh/kg.6 The LTO product is sold globally for use in many applications — with a total of US$5.67 billion sales per annum in 2025. Sales of LTO batteries are expected to grow at 16.9% per annum to an estimated US$ 12.5 billion by 2030. The major manufacturers of LTO batteries include Toshiba, Gree, Microvast and CATL. Further details on applications for the LTO battery from Mordor Intelligence7 are described below. In many of the use cases for LTO batteries, GMG believes that its G+A CELLS can be substituted at a substantially lower cost.Commercial Vehicles: Automotive, primarily buses, refuse trucks, and drayage tractors rather than passenger cars, is the largest user of LTO batteries. Fleets realize five-year total-cost-of-ownership parity once fuel savings and lower maintenance offset higher upfront prices.Fast-charging Electric Buses and Trucks: Transit authorities need battery systems that accept repeated high-power "opportunity charges" during short layovers. LTO cells replenish 80% capacity in roughly five minutes, allowing operators to shrink fleet size without sacrificing route frequency. U.S. Low-No Emission Bus grants earmark more than US$1.5 billion per year, with bid specifications that explicitly reference rapid-charge capability. Parallel subsidy programs in China reimburse up to CNY 80,000 (US$ 11,396) per new-energy bus, accelerating volume deployment in provincial capitals.Hybrid and BEV: Regenerative braking and high-C-rate acceleration favour the use of LTO batteries. Use in fast-charge EV stations is growing rapidly as ride-hailing fleets adopt swap-ready models. Stationary Storage: Utility-scale batteries now cycle multiple times per day for frequency regulation, peak shaving, and voltage support. Energy-storage-system integrators adopt LTO batteries for grid-frequency response where state-of-charge swings are shallow but frequent. Industrial Robotics: LTO batteries are used in continuous-duty forklifts that require partial charges during operator breaks. Aerospace and Defense: Unmanned aerial vehicles, missile auxiliaries, and soldier-worn power banks operating from -40 °C to +60 °C ambient.5-minute Battery-Swap Stations: Battery-as-a-service platforms require ultra-fast turnaround and high cycle life. CATL confirmed plans to install 1,000 swap stations in 2025 and 30,000-40,000 by 2030, each requiring packs that tolerate thousands of rapid exchanges without degradation.Sub-10 kWh Packs: Cordless construction tools, autonomous ground vehicles, and medical carts select LTO batteries to bypass daily pack swaps.12V starter replacement to Lead acid: GMG's G+A CELLS battery technology would be a viable 12 V starter-battery replacement for lead-acid, offering lower weight, longer cycle life, good low-temperature performance and improved cold-cranking capability, together with excellent tolerance to storage at 0% state of charge. In suitable system designs, the chemistry's stable voltage behaviour can also reduce balancing requirements and simplify battery management, helping to lower overall system cost. Lifecycle Procurement Preference: Many government procurement frameworks now weigh lifecycle reliability higher than purchase price. For example, New Mexico awarded a US$ 400 million bus electrification contract that included stringent thermal-runaway resistance metrics. Europe's Clean Industrial Deal allocates capital for storage technologies that stabilize renewables, aligning well with LTO batteries' fast-response profile.Cylindrical Cells: accounted for 37.7% of LTO battery sales in 2024 as entrenched production lines and robust steel casings satisfied heavy-duty demand. Pouch designs address aerospace weight requirements and constrained dashboards in autonomous robots. Summary of Important Milestones for GMG's G+A CELLS Development: MonthImportant Milestones in the Development of the Graphene Aluminium Ion BatteryMay 2020GMG and UQ win Australian Research Council grant for Graphene battery development
https://graphenemg.com/gmg-and-uq-wins-australian-research-council-grant-for-graphene-aluminium-ion-battery-development/Apr 2021The University of Queensland and GMG kick off coin cell battery development project
https://graphenemg.com/gmg-the-university-of-queensland-research-uni-quest-kick-off-the-graphene-enhanced-aluminium-ion-battery-development-project/May 2021Graphene aluminium-ion battery performance data - Energy Density and Power Density
https://graphenemg.com/gmg-graphene-aluminium-ion-battery-performance-data/Jun 2021Graphene aluminium-ion battery performance data - Cycle Life
https://graphenemg.com/graphene-aluminium-ion-battery-performance-data/Jun 2021Significant potential battery customer market response to launch of battery
https://graphenemg.com/gmg-graphene-aluminium-ion-battery-progress-update/Jul 2021Investment decision for coin cell battery development centre
https://graphenemg.com/gmg-battery-pilot-plant-investment/Oct 2021Construction starts for coin cell battery development centre
https://graphenemg.com/construction-battery-pilotplant/Oct 2021Bosch Australia Manufacturing Solutions and GMG sign Letter of Intent
https://graphenemg.com/gmg-and-bosch-sign-collaboration-arrangement-for-bosch-to-design-and-deliver-gmgs-graphene-aluminium-ion-battery-manufacturing-plant/Dec 2021Commencement coin cell battery development centre
https://graphenemg.com/battery-pilot-plant/Dec 2021Initial coin cell batteries sent for customer feedback
https://graphenemg.com/graphene-aluminium-battery-customers-prototypes/Mar 2022Initial factory acceptance testing of semi-automated prototype battery cell assembly equipment
https://graphenemg.com/gmg-announces-initial-factory-acceptance-testing-of-semi-automated-prototype-battery-cell-assembly-equipment/Mar 2022Wood Engineering and GMG Sign a Letter of Intent
https://graphenemg.com/gmg-and-wood-agree-collaboration-arrangement-for-wood-to-engineer-and-deliver-major-graphene-manufacturing-expansion-projects/May 2022Rio Tinto and GMG sign Letter of Intent
https://graphenemg.com/gmg-riotinto-energysavings-battery/Jun 2022Commissioning of Pouch Cell Equipment
https://graphenemg.com/gmg-manufactures-first-pouch-cell/Jun 2022Bob Galyen, former chief technology officer of CATL, joins GMG technical advisory committee.
https://graphenemg.com/gmg-technical-advisory-committee-leadership-team-additions-and-cfo-change/Aug 2022Investment decision for Phase 1 modular Graphene Production Plant
https://graphenemg.com/gmg-announces-phase-1-expansion-project-to-graphene-manufacturing-facility-for-energy-saving-products-and-batteries/Oct 2022Significant battery performance, cell and graphene production improvements
https://graphenemg.com/gmgs-battery-update-significant-battery-performance-cell-and-graphene-production-improvements/Dec 2022Investment of $600k Battery Development Centre
https://graphenemg.com/gmg-invests-au-600000-to-accelerate-battery-pouch-cell-customer-testing-development-in-2023/Feb 2023Australian Government Approval (AICIS) for production and sale of batteries.
https://graphenemg.com/gmg-receives-regulatory-approval-to-enable-significant-commercial-sales/May 2023Battery Joint Development Agreement with Rio Tinto signed
https://graphenemg.com/gmg-announces-battery-joint-development-agreement-with-rio-tinto/May 2023Battery Technology Readiness Level (BRTL) 2-3 reached
https://graphenemg.com/gmg-announces-battery-team-and-related-updates/May 2023Decision to switch to develop Pouch Cells (instead of Coin Cells)
https://graphenemg.com/gmg-announces-battery-team-and-related-updates/Jul 2023Bob Galyen former chief technology officer of CATL joins GMG board of Directors
https://graphenemg.com/graphene-manufacturing-group-appoints-former-chief-technology-officer-of-catl-limited-to-its-board-of-directors/Sep 2023Battery Pouch Cell Prototypes Multilayered Auto-Stacker Demonstration
https://graphenemg.com/gmg-graphene-aluminium-ion-battery-pouch-cell-prototypes-multilayered-auto-stacker-demonstration/Sep 2023Reaching 500 mAh capacity battery
https://graphenemg.com/gmg-achieves-500mah-graphene-aluminium-ion-battery-prototype-in-pouch-cell-format/Sep 2023Battery Technology Readiness Level (BRTL) 4 reached
https://graphenemg.com/gmg-achieves-500mah-graphene-aluminium-ion-battery-prototype-in-pouch-cell-format/Nov 2023Rio Tinto and GMG Partnership Video Launched
https://graphenemg.com/rio-tinto-gmg-battery-partnership-video-launch/Dec 2023Commissioning of modular Graphene Production Plant
https://graphenemg.com/graphene-manufacturing-group-commissions-modular-graphene-production-plant/Feb 20241000 mAh Capacity Reached
https://graphenemg.com/gmgs-graphene-aluminium-ion-battery-1000-mah-capacity-reached-and-next-steps-toward-commercialisation/Mar 2024Graphene Manufacturing Group Secures AU$2 million Funding Grant from Queensland Government for Battery Pilot Plant
https://graphenemg.com/graphene-manufacturing-group-secures-au2-million-funding-grant-from-queensland-government-for-battery-pilot-plant/Aug 2024GMG's Graphene Aluminium-Ion Battery: Progress Update and Next Steps Toward Commercialisation
https://graphenemg.com/gmgs-graphene-aluminium-ion-battery-progress-update-and-next-steps-toward-commercialisation/Mar 2025GMG's Graphene Aluminium-Ion Battery: Collaboration with World Leading USA Battery Innovation Centre and Next Steps Toward Commercialisation
https://graphenemg.com/gmgs-graphene-aluminium-ion-battery-collaboration-with-world-leading-usa-battery-innovation-centre-and-next-steps-toward-commercialisation/Dec 2025GMG Unveils Graphene Aluminium-Ion Battery that Fully Charges in 6 minutes
https://graphenemg.com/gmg-unveils-graphene-aluminium-ion-battery-that-fully-charges-in-6-minutes/ About BIC:
BIC is a collaborative initiative designed to incorporate leadership from renowned universities, government agencies, and commercial enterprises. BIC is a public-private partnership and a not-for-profit organization focusing on the rapid development, testing and commercialization of safe, reliable and lightweight energy storage systems for defense and commercial customers. BIC is a unique organization that has been leading battery cell development for world leading battery companies for over 10 years and has carried out over 500 battery development projects. About GMG:
GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications. The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines. In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed to improve the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation Battery Develop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223 Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041www.graphenemg.comNeither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include without limitation, statements regarding the pricing of LTO batteries, expectations for GMG G+AI batteries to achieve specification requirements for heavy mobile equipment, the lower cost to produce GMG G+AI batteries, expectations for GMG G+AI batteries in respect of charging time, stability, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system when development is completed, that the new hybrid electrolyte is chloride free and non-corrosive, that the cathode and anode technology employed enables very fast and stable charging, that GMG G+AI batteries provide significant cost and weight savings relative to copper, that G+AI batteries can achieve over 150 Wh/kg charged over 1 hour and 75 Wh/kg when charged over 6 minutes following further development of cathode, anode, electrolyte and component weights, that G+AI batteries will progress to BTRL 7 and 8, that the timeline for the battery cell roadmap is achievable, that a range of global companies in a variety of industries will be interested in working with GMG, that the battery pack design will be plastic and which offers weight, cost and complexity advantages to a metal case and increased energy density, expectations for the lack of a thermal management system or fireproofing precautions, expectations for material and manufacturing costs, expectations for sales of LTO batteries, expectations for G+AI batteries being substitutable for LTO batteries at lower cost, expectations that G+AI batteries are viable 12V starter battery replacements and the rationale therefor and the advantages of pouch design for aerospace weight requirements and constrained dashboards of autonomous robots.Such forward-looking statements are based on a number of assumptions of management, including, without limitation, assumptions that GMG G+AI batteries can be produced at lower cost, as to charging time, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system for G+AI batteries, the speed and stability of charging, that G+AI batteries will progress to BTRL 7 and 8, that a range of global companies in a variety of industries will be interested in working with GMG, that the battery pack design will be plastic and offer weight, cost and complexity advantages to a metal case and increased energy density, that the service agreement with the BIC will enable the Company to optimize its cell design and battery manufacturing equipment, and that the Company will be able to meet its overall timeline on the battery cell roadmap. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation: that GMG G+AI batteries cannot be produced at lower cost, or any of the assumptions as to charging time, energy density, life cycle, safety, thermal runway risk and the need for a thermal management system for G+AI batteries can not be achieved, G+AI batteries do not offer expected speed and stability of charging, that G+AI batteries will not progress to BTRL 7 and 8, that a range of global companies in a variety of industries will not be interested in working with GMG, that the battery pack design will not be plastic and not offer weight, cost and complexity advantages to a metal case and increased energy density, that the Company will not be able to optimize the electrochemical behaviour of the pouch cell through laboratory experimentation or at all, that the Company will not be able to meet its overall timeline on the battery cell roadmap, that the service agreement with the BIC will not enable the Company to optimize its cell design and battery manufacturing equipment and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 04, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.1 https://www.ritarpower.com/industry_information/The-Price-of-50-kWh-Lithium-Ion-Batteries-A-Comprehensive-Analysis_297.html#:~:text=Lithium%20Titanate%20(LTO)%20Batteries%3A,cost%20between%20%2440%2C000%20and%20%2460%2C000.
2 https://graphenemg.com/gmg-unveils-graphene-aluminium-ion-battery-that-fully-charges-in-6-minutes/
3 https://findingspress.org/article/21459-impact-of-charging-rates-on-electric-vehicle-batt
4 High-power type cells | SCiB™ Rechargeable battery | Toshiba
5 https://www.ritarpower.com/industry_information/The-Price-of-50-kWh-Lithium-Ion-Batteries-A-Comprehensive-Analysis_297.html#:~:text=Lithium%20Titanate%20(LTO)%20Batteries%3A,cost%20between%20%2440%2C000%20and%20%2460%2C000.
6 https://www.grepow.com/blog/battery-energy-density.html
7 Lithium Titanate Oxide Battery Market Size, Share & 2030 Growth Trends ReportTo view the source version of this press release, please visit https://www.newsfilecorp.com/release/292641
Original: GMG Doubles Energy Density of 6 Minute Charging Graphene Aluminium-Ion Battery
CA Market News
2月前
CEO.CA's Inside the Boardroom: GMG Can Now Launch Commercial Graphene Sales in the U.S.April 8, 2026 11:25 AM
NewsfileToronto, Ontario--(Newsfile Corp. - April 8, 2026) - CEO.CA ("CEO.CA"), the leading investor social network in junior resource and venture stocks, shares exclusive updates with CEOs of junior mining explorers.Founded in 2012, CEO.CA, a wholly owned subsidiary of EarthLabs, Inc., is one of the most popular free financial websites and apps in Canada and for investors globally - with industry leading audience engagement and mobile functionality. Millions of people visit CEO.CA each year to connect with investors from around the world, share knowledge and view impactful stories about stocks, commodities, and emerging companies.As a media partner at investor events around the world, CEO.CA provides coverage of the companies shaping the future of mining, meeting with industry leaders to learn more about their vision and strategy.Meet the Executives Shaping the Mining LandscapeWe catch up with Craig Nicol, CEO of Graphene Manufacturing Group Ltd. (TSXV: GMG) (OTCQX: GMGMF), to discuss a transformative milestone: receiving official U.S. EPA approval to import and sell their THERMAL-XR® graphene coating system in the United States. Join the chat with other investors: https://ceo.ca/gmgGraphene Manufacturing Group
(TSXV: GMG) (OTCQX: GMGMF)[Suppressed Sound Link]Cannot view this video? Visit:
https://www.youtube.com/watch?v=vRU3aF0q3aITune into 'Inside the Boardroom' each week and be part of the conversation that's shaping the business landscape. Visit CEO.CA or our YouTube page for hundreds more executive interviews from CEO.CA here.Interested in showcasing your company on 'Inside the Boardroom'? Get in touch with our team at sales@ceo.ca for further details and opportunities.About CEO.CAThe leading community for investors & traders in junior resource & venture stocks. CEO.CA is one of the most popular free financial websites and apps in Canada and for small-cap investors globally -- with industry leading audience engagement and mobile functionality. Since 2012, CEO.CA has brought millions of investors together from over 164 countries to discuss their portfolio holdings and find new investment opportunities. Download our App on iOS or Android marketplace or visit us today at CEO.CA to set up your free account. CEO.CA is a wholly owned subsidiary of EarthLabs, Inc. For further information please contact:CEO.CA
Email: hello@ceo.ca
Website: CEO.CANeither the TSX Venture Exchange ("TSXV"), OTC Best Market "(OTCQX") nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release. Cautionary Statement The information regarding any issuer contained or referred to in any interviews conducted by CEO.CA has been furnished by such issuer directly, and neither CEO.CA nor any of its affiliates or principals assumes any responsibility for the accuracy or completeness of such information or for any failure by an issuer to ensure disclosure of events or facts which may affect the significance or accuracy of any such information.No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. This news release contains forward-looking information which involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects, and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward-looking information in this news release may include, but is not limited to, the objectives, goals, future plans, statements regarding exploration results and exploration and/or development plans of companies featured on the CEO.CA platform. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, capital and operating costs varying significantly from estimates, the preliminary nature of metallurgical test results, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, uncertainties relating to the availability and costs of financing needed in the future, changes in equity markets, inflation, fluctuations in commodity prices, delays in the development of projects, currency risk and the other risks involved in the applicable exploration and development industry, and those risks set out in the public documents of such companies filed on SEDAR or elsewhere from time to time. Undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. CEO.CA disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/291626
Original: CEO.CA's Inside the Boardroom: GMG Can Now Launch Commercial Graphene Sales in the U.S.
CA Market News
3月前
GMG Verified by Advanced Carbons Council & Successful ISO9001 AuditApril 1, 2026 8:00 AM
NewsfileBrisbane, Australia--(Newsfile Corp. - April 1, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased that the Advanced Carbons Council (the "ACC") has certified GMG as a Verified Graphene Producer.The Verified Graphene Producer program is an independent 3rd party verification by the ACC of not just the material, but it includes an in-person visit of the production facilities. This makes it unique in that the ACC verify the source of the material as coming directly from the production stream while using world-class characterization labs to test the material.To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/290829_3bb80a87648f4a4f_001full.jpgThe Verified Graphene Producer program follows the Graphene Classification Framework (GCF) and the currently published international standards, including: ISO/TS 9651:2025 Nanotechnologies - Classification framework for graphene-related 2D materials, ISO/TR 19733:2019(E), Nanotechnologies - Matrix of properties and measurement techniques for graphene and related two dimensional (2D) materials, ISO/TS 80004-13:2017(E) Nanotechnologies - Vocabulary - Part 13: Graphene and related two-dimensional (2D) materials and ISO/TS 21356-1:2021(E) Nanotechnologies - Structural characterization of graphene - Part 1: Graphene from powders and dispersionsThe Company is also pleased to announce it has successfully passed another ISO9001:2015 quality audit of the organisation for the manufacturing, distributing, and providing technical support for the Company's graphene coating and lubricant additive products. Figure 1 shows the certificate. ISO 9001 is the internationally recognized standard for Quality Management Systems (QMS). It provides a framework for organizations to ensure products and services consistently meet customer and regulatory requirements while focusing on continual improvement. It is applicable to any industry or business size, focusing on quality control, efficiency, and risk management.Terrance Barkan, Executive Director of the Advanced Carbons Council, commented "We are proud to count Graphene Manufacturing Group (GMG) as the newest member of a select group of graphene companies to have passed a rigorous in-person inspection of their facilities and a thorough examination of their graphene material. Independent, third party validation through the Verified Graphene Producer program is an incredibly valuable tool for customers, investors and other stakeholders when choosing a graphene producer/supplier. "Figure 1: GMG's ISO9001 Quality Management Standards CertificationTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/290829_3bb80a87648f4a4f_002full.jpgCraig Nicol, CEO & Managing Director of the Company, commented "Verification by the Advanced Carbon Council as one of five currently verified global graphene producers is another proof of the high quality of our graphene and why our graphene products function at such a world leading standard and our quality system audit successful outcome shows our ability to turn this into a real product manufacturing business." Jack Perkowski, Chairman and Non-Executive Director of the Company, commented: "Congratulations to the team on getting this third-party verification on the graphene and quality management system - a real table stake when it comes to producing carbon nano material products".About Advanced Carbons Council: The Advanced Carbons Council (ACC) is the global trade association that supports the production, adoption and use of engineered advanced carbons. Our mission is to connect and facilitate the cross-sector fertilization of ideas, applications and business for all advanced materials producers and users. Our Members are companies and organizations that produce, use and develop applications for: Graphene, Carbon Nanotubes (CNTs), Carbon Nanofibers, Carbon Fiber, Synthetic and Engineered Graphite, Carbon-Carbon Composites, Carbon Nanodiamonds (CNDs), Fullerenes, MXenes and new carbon forms, Recycled and Reclaimed Carbons. Delivered by the same team that has grown and developed The Graphene Council over the past 12 years to become a global community of more than 40,000 materials professionals, the ACC focuses on standards, quality, safety, education, sustainability, advocacy, verification, testing and outreach to connect users with qualified supply chain partners. About GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes" "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include without limitation, the fact that ACC's Verified Graphene Producer program is unique, that it follows the Graphene Classification Framework and international standards, the applicability of the ISO9001 to GMG, its suitability for any industry or business size and its focus, the quality of GMG's graphene, its functioning at a world leading standard, and its ability to turn its quality system into a successful product manufacturing business.Such forward-looking statements are based on a number of assumptions of management. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation that GMG does not receive or receive on a timely basis the fully signed consent notice from the and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/290829
Original: GMG Verified by Advanced Carbons Council & Successful ISO9001 Audit
CA Market News
3月前
GMG Launches European Sales Team; G(R) Lubricant Patent Accepted for EuropeMarch 23, 2026 8:05 AM
NewsfileBrisbane, Australia--(Newsfile Corp. - March 23, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce that the Company has officially launched its European sales activity. During the week of March 9th, GMG held a kick off training workshop in London where it brought together its new team members from various locations in Europe and UK for technical product and sales training. The GMG European Sales team numbers more than 10 professional sales executives based in Europe and UK who focus on lead generation, inside sales and executive sales business development for GMG's G® Lubricant and THERMAL-XR® products.Figure 1: Members of the GMG European Sales TeamTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/289529_gmg_figure1.jpgSeparately, the Company is also pleased to announce that it has been informed that the G® Lubricant patent in Europe has been accepted to be granted for a period of 20 years. Craig Nicol, CEO & Managing Director of the Company, commented "Building a sales force in key areas of the world is one of GMG's key activities it is focused on right now and to get the European team set up and running so fast has been a great achievement."Jack Perkowski, Chairman and Non-Executive Director of the Company, commented: "I congratulate the Company on building the European Sales team and look forward to hearing of future success."About GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes" "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include without limitation, the size, term and success of GMG's European sales team and the eventual granting of and successful enforceability of the Company's G® Lubricant patent.Such forward-looking statements are based on a number of assumptions of management, including the European sales team will perform and the Company's G® Lubricant patent will be patented successfully. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation that the GMG European Sales team does not successfully drive sales for the Company and the Company's G® Lubricant patent is not patented and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/289529
Original: GMG Launches European Sales Team; G(R) Lubricant Patent Accepted for Europe
delerious1
3月前
THERMAL-XR(R) Sales in the United States to Commence After GMG Receives U.S. EPA Approval
March 16, 2026 7:45 AM EDT | Source: Graphene Manufacturing Group Ltd.
Brisbane, Australia--(Newsfile Corp. - March 16, 2026) - Graphene Manufacturing Group Ltd. (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce that the United States Environmental Protection Agency ("EPA") has now approved the import and sale of GMG's THERMAL-XR graphene based coating system in the United States.
The EPA has issued a consent order for pre-manufacture notice PMN P-25-0018 in accordance with section 5(e) of the Toxic Substances Control Act, 15 U.S.C. 2604(e) (the "Order"). Under the Order, GMG is authorised to export, distribute, sell, use and dispose of the chemical substance described in the pre-manufacture notice submitted by the Company, and which is used in GMG's THERMAL-XR® ENHANCE graphene-based coating system for various applications including Heating Venting Air Conditioning and Refrigeration (HVAC-R), Data Centres, Liquified Natural Gas Plants (LNG), Automotive and Electronics amongst others in the United States in accordance with the requirements and conditions set out in the Order (the "New Chemical Substance").
GMG supplies its THERMAL-XR® graphene coating product for the HVAC-R equipment market to its exclusive North American distributor, Nu-Calgon Wholesaler, Inc. ("Nu-Calgon") which is marketed and sold as "Nu-Calgon CoolWorx® powered by GMG® Graphene" as seen in an example shown in Figure 1. As a result of the Order, GMG, together with Nu-Calgon, is now able to commence commercial sales of THERMAL-XR® products into the U.S. for industrial use, subject to and in accordance with the requirements and conditions of the Order.
Cannot view this image? Visit: https://images.newsfilecorp.com/files/8082/288616_ab987720443d2967_001.jpg
Figure 1: Nu-Calgon CoolWorx® Powered by GMG® Graphene Label
https://images.newsfilecorp.com/files/8082/288616_ab987720443d2967_001full.jpg
The first shipment of THERMAL-XR® will now be sent to Nu-Calgon for distribution in North America.
Craig Nicol, CEO & Managing Director of the Company, commented, "We believe that this EPA consent order is a major milestone for GMG as it allows us, together with our exclusive North American distributor Nu-Calgon, to commence commercial sales of THERMAL-XR® in we what we see as the largest HVAC-R coating market in the world."
Jack Perkowski, Chairman and Non-Executive Director of the Company, commented: "With regulatory clearance now in place, we believe that we can begin converting the strong interest that we have seen from customers into revenue, while leveraging Nu-Calgon's extensive distribution network to reach across the North America to scale THERMAL-XR® ENHANCE / CoolWorx® deployment over time. We believe that GMG is one of the few companies to have received EPA approval for the export and sale of an unlimited amount of a graphene-based product in the United States of America."
About THERMAL-XR® ENHANCE powered by GMG Graphene:
THERMAL-XR® ENHANCE coating system is a unique method of improving the conductivity of corroded heat exchange surfaces and improving and maintaining the performance of new units at peak levels. The process coats and protects heat exchange surfaces while improving and rebuilding the lost corroded thermal conductivity and increasing the heat transfer rate by leveraging the physics of GMG Graphene, resulting in an efficiency improvement and a potential power reduction.
THERMAL-XR® ENHANCE is now patented for 20 years in Australia and is expected to be patented in other countries around the world.
THERMAL-XR® ENHANCE Development and EPA Approval History
Month Significant Milestones for THERMAL-XR® powered by GMG Graphene
September
2022 GMG acquires THERMAL-XR® manufacturing intellectual property and brand rights GMG ACQUIRES THERMAL-XR MANUFACTURING INTELLECTUAL PROPERTY AND BRAND RIGHTS AND GRANTS RSUs TO DIRECTORS AND OFFICERS - Graphene Manufacturing Group | GMG (graphenemg.com)
December
2022 Verified Improved Heat Transfer by The University of Queensland. VERIFIED IMPROVED HEAT TRANSFER ON ALUMINIUM WITH THERMAL-XR® & MARKET UPDATE - Graphene Manufacturing Group | GMG (graphenemg.com)
February
2023 Approval from Australian Industrial Chemicals Introduction Scheme (AICIS) GMG RECEIVES REGULATORY APPROVAL TO ENABLE SIGNIFICANT COMMERCIAL SALES - Graphene Manufacturing Group | GMG (graphenemg.com)
April
2023 Total available market for THERMAL-XR® estimated by Company to be > US$28.4 billion GMG ANNOUNCES COMMERCIALISATION PROGRESS OF THERMAL-XR® - Graphene Manufacturing Group | GMG (graphenemg.com)
April
2023 First order of THERMAL-XR® > $120,000 GMG ANNOUNCES COMMERCIALISATION PROGRESS OF THERMAL-XR® - Graphene Manufacturing Group | GMG (graphenemg.com)
May
2023 Signing of Distributors for Singapore, Thailand, Indonesia & South Korea GMG SIGNS THERMAL-XR® DISTRIBUTOR AGREEMENTS IN 4 ASIAN COUNTRIES - Graphene Manufacturing Group | GMG (graphenemg.com)
June
2023 Independently Verified Heat Transfer & Energy Savings GMG ANNOUNCES INDEPENDENTLY VERIFIED HEAT TRANSFER AND ENERGY SAVINGS RESULTS FROM THERMAL-XR® - Graphene Manufacturing Group | GMG (graphenemg.com)
July
2023 Signing of Nu-Calgon Distribution for North America - USA, Canada, Mexico, & Caribbean. GMG APPOINTS NU-CALGON AS THERMAL-XR® DISTRIBUTOR FOR NORTH AMERICA - Graphene Manufacturing Group | GMG (graphenemg.com)
August
2023 Commissioning of THERMAL-XR® Coating Bulk Blend Plant GMG PROVIDES COMMERCIALISATION PROGRESS OF THERMAL-XR® - Graphene Manufacturing Group | GMG (graphenemg.com)
October
2023 Forward Orders > AU$ 400k - Conditional on Import Approvals for some Countries GMG PROVIDES COMMERCIALISATION UPDATE ON ENERGY SAVINGS COATING THERMAL-XR® - Graphene Manufacturing Group | GMG (graphenemg.com)
December
2023 Commissioning of the modular Graphene Production plant Graphene Manufacturing Group Commissions Modular Graphene Production Plant - Graphene Manufacturing Group | GMG (graphenemg.com)
January
2024 Canada Approval Department of Environment and Climate Change Canada (ECCC)
January
2024 Launch of Nu-Calgon CoolWorx® powered by GMG Graphene at Chicago AHR Expo 2024. Launch of Nu-Calgon CoolWorx® powered by GMG Graphene at Chicago AHR Expo 2024.
April
2024 GMG Provides Commercialisation Update on Energy Savings Coating THERMAL-XR® GMG Provides Commercialisation Update on Energy Savings Coating THERMAL-XR®
December
2024 GMG Reaches Market Commercialisation Milestone on Energy Savings Coating THERMAL-XR® GMG Reaches Market Commercialisation Milestone on Energy Savings Coating THERMAL-XR®
December
2025 USA EPA Approval Conditions Accepted for Graphene Coating THERMAL-XR®
USA EPA Approval Conditions Accepted for Graphene Coating THERMAL-XR®
About GMG:
GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.
The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.
In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.
GMG's 4 critical business objectives are:
Produce Graphene and improve/scale cell production processes
Build Revenue from Energy Savings Products
Develop Next-Generation Battery
Develop Supply Chain, Partners & Project Execution Capability
For further information, please contact:
Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223
Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041
CA Market News
4月前
VIDEO - BTV Visits Atlas Salt, Graphene Manufacturing, Telescope Innovations, Nevada Organic Phosphate, Maple Gold, Intrepid Metals and Nine Mile MetalsMarch 4, 2026 6:00 AM
NewsfileWatch on BNN Bloomberg national
Wednesday, March 4 at 7:30 PM EST & Saturday, March 7 at 8 PM EST Tune into BTV and Discover Investment Opportunities. Vancouver, British Columbia--(Newsfile Corp. - March 4, 2026) - As the resource cycle accelerates, BTV – Business Television highlights companies turning exploration, innovation and strategic growth into actionable opportunity.Atlas Salt Inc. (TSXV: SALT) (OTCQX: SALQF) is moving toward construction of a battery and electric salt mine in Newfoundland with more than one billion tonnes of defined resource. The project targets low-cost de-icing supply for Ontario and the U.S. Northeast, markets currently facing seasonal shortages.Graphene Manufacturing Group Ltd. (TSXV: GMG) (OTCQX: GMGMF) BTV chats with Graphene Manufacturing Group about turning graphene's long-promised potential into real-world commercial applications — from energy-saving coatings and advanced cooling solutions to ultra-fast charging battery technology.Telescope Innovations (CSE: TELI) (OTCQB: TELIF) is commercializing a Physical AI platform that automates lab experimentation, exponentially boosting productivity. Early sales in Asia and the U.S. mark initial traction as the company targets pharmaceutical and battery materials markets.Nevada Organic Phosphate Inc. (CSE: NOP) (OTCQB: NOPFF) controls a rapidly expanding, naturally clean phosphate system in Nevada that can be applied directly to farmland without chemical processing. Targeting the fast-growing organic agriculture sector, the project offers scalable domestic supply potential and future strategic value.Maple Gold Mines Ltd. (TSXV: MGM) (OTCQB: MGMLF) BTV explores this company positioned as a leading developer with a 3-million-ounce resource, Agnico partnership, and a historic mine complex in Quebec. The 2026 program will test resource growth and the potential for a modern restart.Intrepid Metals Corp. (TSXV: INTR) is drilling shallow copper targets in Arizona with potential links to a larger system. The program is supported by mining major, Teck Resources with further exploration planned this year, including work on a second project.Nine Mile Metals (CSE: NINE) (OTC Pink: VMSXF) With modern drone geophysics unlocking what older methods missed, Nine Mile is targeting hidden polymetallic systems in Bathurst. BTV examines how active drilling could expand and upgrade its resource base.About BTV – Business Television / BTV The Agency:For 28 years, BTV – Business Television has been on the air as the go-to half-hour investment show for savvy investors, delivering exclusive on-location interviews and actionable insights with emerging companies, industry leaders, and market experts. Hosted by Taylor Thoen and Jessica Katrichak, BTV provides investors with direct access to executive teams and compelling investment opportunities not found anywhere else.Discover Investment Opportunities.BTV SHOW BROADCAST NETWORKS and TIMES: CANADA:
Airing on BNN Bloomberg!Wednesday, March 4 @ 7:30pm ETSaturday, March 7 @ 8:00pm ET US National TV:
Biz Television Network –Sun, March 8 @ 1:00pm ETMon, March 9 @ 8:30am ETTues, March 10 @ 8:30pm & 11:30PM ESTBTV The Agency is a capital markets–focused B2B TV production and digital marketing agency serving publicly traded and financial companies. Through strategic content creation and extensive distribution across top-tier networks including Bloomberg, CNBC, FOX Business News, and leading financial platforms, the agency helps companies reach investors, advisors, and institutions—building brand credibility and driving national retail and institutional investor awareness.Take action now: Suggest a standout company to feature on BTV and put your pick in front of thousands of investors eager for the next big opportunity! Contact us directly at (604) 664-7401 or info@b-tv.com. Don't miss a beat—stay informed and ahead of the market by subscribing to BTV news today.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/286189
Original: VIDEO - BTV Visits Atlas Salt, Graphene Manufacturing, Telescope Innovations, Nevada Organic Phosphate, Maple Gold, Intrepid Metals and Nine Mile Metals
CA Market News
4月前
Graphene Manufacturing Group Ltd. Approves AU$1.4 Million Deployment: The Remaining Capital Needed for a Second GenerationMarch 2, 2026 3:41 PM
NewsfileTechnology Graphene Production Plant with Capacity of 10 Tons Per AnnumBrisbane, Australia--(Newsfile Corp. - March 2, 2026) - Graphene Manufacturing Group Limited (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce that the Board of Directors of GMG has approved the investment of an additional AU$1.4 million, which is expected to complete the construction of the Company's Gen 2.0 Graphene Manufacturing Technology plant (the "Gen 2.0 Plant") capable of producing 10 tons of graphene per annum. The total capital cost for the Gen 2.0 Plant is an estimated AU$2.3 million, an expenditure that was largely included in the proposed use of proceeds for the March 2025 Bought Deal Financing of C$5,796,000.The Company's Board is happy with progress to date and is confident that the Gen 2.0 Plant project is on track to meet its original budget and expectation to be online by the middle of 2026. The early work and procurement of the long lead items is substantially complete, and engineering and design has commenced.The Gen 2.0 Plant is expected to be largely self-powered from standalone energy generation that utilizes renewable sources, an energy storage system and hydrogen enriched natural gas provided by tail gas power generation.Figure 1: GMG Headquarters LayoutTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/285998_graphene1.jpgGMG's Managing Director and CEO, Craig Nicol, commented: "We are very excited with the progress to date of the Gen 2.0 project and are looking forward to bringing the plant online - on time and on budget."GMG's Chairman and Director, Jack Perkowski, commented: "A successful Gen 2.0 project will form the basis for the Company's future expansion plans." Quarterly Financial Results UpdateThe Company is pleased to provide a further update to its most recent Quarterly Financial Results as published and filed on March 2, 2026. The Company's results are reported under International Financial Reporting Standards (IFRS). This news release may include certain Non-IFRS measures as reported in the Company's Quarterly Management Discussion and Analysis ("MD&A") that are used internally by management to assess the underlying operational performance of our business.Understanding the Non-Cash Warrant LiabilityAs at December 31, 2025, the Company had 18.6 million outstanding share purchase warrants with exercise prices denominated in Canadian dollars. Because GMG's functional currency is the Australian dollar, IFRS accounting standards require these warrants to be treated as a derivative financial liability and revalued at fair value each reporting period.During Q2 FY2026, GMG's share price increased 178%, a strong performance that reflects growing market confidence. However, under IFRS, this share price increase results in a higher calculated fair value for the warrant liability, which in turn generates a non-cash loss in the Company's statement of profit or loss and a corresponding increase in total liabilities on the balance sheet.Key Points for Shareholders:This accounting adjustment is entirely non-cash and does not affect GMG's cash position, operations, or business fundamentals.The Company's cash balance at December 31, 2025 was A$13.9 million, up from A$7.7 million at June 30, 2025.Excluding the warrant liability, the Company's underlying net assets position at December 31, 2025 was positive A$21.5 million.The warrant liability decreases when warrants are exercised (converting the liability to equity and adding cash), or when the warrants expire or when the share price declines. Subsequent to December 31, 2025, approximately 2.9 million warrants were exercised for gross proceeds of A$3.6 million, further strengthening the Company's cash position and reducing the warrant liability by a corresponding amount.Management views the warrant liability as a technical accounting matter that does not reflect the Company's operational performance or strategic progress. The Company's market capitalization at December 31, 2025 was approximately USD$200 million.Non-IFRS MeasuresA Non-IFRS measure that the Company refers to in its MD&A is EBITDA, which is revenue before finance costs, tax, depreciation and amortization, and after adjusting for certain non-cash items and other earnings adjustment items. The Company believes that EBITDA provides useful information to assess the operational performance of the business, however, Non-IFRS measures do not have a standardized meaning under IFRS, have not been subject to audit, and should not be considered as an indication of or alternative to an IFRS measure of financial performance.Table 1: Calculation of EBITDATo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/285998_66807f3f541149e1_017full.jpgThe following table provides the reconciliation of the underlying loss for the period and adjusted basic diluted loss per share, as adjusted and calculated by the Company. This reconciliation adjusts for the non-cash change in fair value of warrants which is included in the Company's Unaudited Condensed Consolidated Interim Statement of Profit or Loss and Other Comprehensive Income.Table 2: Calculation of the unaudited adjusted loss for the period and adjusted basic and diluted loss per share, as adjusted and calculated by the Company.To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/285998_66807f3f541149e1_018full.jpg(1) Due to the loss recognized for the years, all outstanding stock options, warrants, broker warrants, restricted share units and performance share units were excluded from the calculation of diluted loss per share due to their anti-dilutive effect.
(2) Calculated using loss for the period over the weighted average number of ordinary shares as per IFRS.
(3) Calculated using adjusted loss for the period over the weighted average number of ordinary shares (non-IFRS measure).About GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information, please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "expects" or "anticipates", or variations of such words and phrases, or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. These statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include, without limitation, statements regarding, expected capital requirements to complete the Gen 2.0 Plant, expected graphene production capacity of the Gen 2.0 Plant and the timing of its construction and commissioning, the extent to which the plant will be largely self-powered from standalone energy generation, the implications of the Gen 2.0 Plant on future expansion plans, the Company's assessment of the warrant liability as a technical accounting matter and management's view that this liability does not reflect operational performance, expectations regarding future warrant exercises, management's belief that EBITDA is a useful measure of operational performance, the Company's four critical business objectives.Such forward-looking statements are based on a number of assumptions of management, including, without limitation, assumptions that the Company's operational and strategic progress will continue, that the Gen 2.0 Plant will be constructed, commissioned and ramped up broadly on time and on budget, that the technology deployed at the Gen 2.0 Plant will perform as expected, that sufficient customer demand will develop for products produced at the Gen 2.0 Plant, that the warrant liability will decrease as warrants are exercised or expire, that the Company's cash position and business fundamentals remain strong, that future financial performance will improve, and that the accounting treatment of warrants under IFRS will remain unchanged.Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation, fluctuations in the Company's share price that may increase the warrant liability, failure to complete or commission the Gen 2.0 Plant as currently planned, construction, cost-overrun, technology and ramp-up risks associated with the Gen 2.0 Plant, failure to achieve operational milestones, inability to commercialize products, changes in accounting standards, adverse market conditions, foreign exchange volatility, and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial outlook that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/285998
Original: Graphene Manufacturing Group Ltd. Approves AU$1.4 Million Deployment: The Remaining Capital Needed for a Second Generation
CA Market News
4月前
Graphene Manufacturing Group Ltd. Engages AJO Capital Inc. for Marketing and Investor Awareness ServicesFebruary 23, 2026 8:43 PM
NewsfileBrisbane, Australia--(Newsfile Corp. - February 23, 2026) - Graphene Manufacturing Group Ltd. (TSXV: GMG) ("GMG" or the "Company") is pleased to announce that the Company has entered into an advertising services agreement (the "Agreement") dated February 19, 2026 with AJO Capital Inc. ("AJO"), whereby AJO will provide marketing and investor awareness services to raise public awareness of GMG, including without limitation, original news articles, podcast and interview content creation, newspaper, television, radio and industry network distribution, as well as social media support (the "Services"). GMG has agreed to a monthly payment of US$26,500 for the provision by AJO of the Services. The Agreement commenced on February 19, 2026 and has an initial term of four (4) months unless earlier terminated. The Agreement may be renewed upon mutual written agreement at least thirty (30) days prior to the expiration of the initial term, subject to any modifications to compensation and payment terms as the parties may agree.AJO is a private company based in New York, United States dedicated to providing financial information and media and communication services. The Company will not issue any securities of the Company to AJO as compensation. To the Company's knowledge, AJO and its directors and officers are arm's length from the Company and do not have any interest, direct or indirect, in the Company or its securities nor do they have any right to acquire such an interest.About GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed to improve the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information, please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward-looking statements", are not historical facts, are made as of the date of this news release and include without limitation, services to be provided by AJO, term and termination of the Agreement and compensation payable to AJO pursuant to the Agreement.Such forward-looking statements are based on a number of assumptions of management, including, without limitation, assumptions regarding the services to be provided by AJO, covenants by AJO under the Agreement, length of the term of the Agreement, termination of the Agreement and compensation payable to AJO pursuant to the Agreement, that the Company will not issue any future securities to AJO as compensation under the Agreement, that AJO acts at arm's length to the Company and none of AJO, its directors nor officers have any direct or indirect interest in the Company and its securities nor do they have any right to acquire such interests. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation, failure by AJO to render services in accordance with the Agreement, breach of the Agreement by either parties, early termination of the Agreement and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/285033
Original: Graphene Manufacturing Group Ltd. Engages AJO Capital Inc. for Marketing and Investor Awareness Services