CA Market News
1月前
C3 Metals Continues to Intersect Broad Zones of Near-Surface Copper Mineralization at the Khaleesi Project, PeruApril 29, 2026 7:00 AM
NewsfileToronto, Ontario--(Newsfile Corp. - April 29, 2026) - C3 Metals Inc. (TSXV: CCCM) (OTCQB: CUAUF) ("C3 Metals" or the "Company") is pleased to announce results from 11 additional holes drilled at its 100%-owned Khaleesi copper project ("Khaleesi" or "the Project") in southern Peru. Strong copper mineralization intersected in a magnetite skarn returned 148.05m at 0.42% CuEq (0.34% copper) from approximately 265m vertical depth. In a different hole, near-surface magnetite and garnet skarn mineralization returned 43.80m at 0.59% CuEq (0.47% copper) from approximately 25m vertical depth. Khaleesi Drill Hole HighlightsDrill hole KHZ5825-003 intersected a 148.05m zone of magnetite-skarn hosted, copper-gold-silver-molybdenum mineralization, reporting 0.34% copper, 0.037 g/t gold, 0.87 g/t silver and 78 ppm molybdenum (0.42% CuEq) from 275.00m downhole depth.Included a 114.05m zone of magnetite skarn that reported 0.39% copper, 0.042 g/t gold, 1.02 g/t silver and 79 ppm molybdenum (0.48% CuEq) from 309.00m downhole depth (Figures 1 and 2).KHZ5790-001 intersected a 43.80m zone of near-surface magnetite skarn and endoskarn altered diorite that reported 0.47% copper, 0.087 g/t gold, 2.17 g/t silver and 48 ppm molybdenum (0.59% CuEq) from 40.1m downhole depth.Two high grade intersections include a 3.8m zone of chalcopyrite-rich skarn that reported 1.49% copper, 0.243 g/t gold, 7.67 g/t silver and 17 ppm molybdenum (1.80% CuEq) from 42.0m downhole depth (Figure 1) and a 1.4m zone of semi-massive chalcopyrite - pyrite (Figures 1 and 2) cutting a skarn that reported 4.91% copper, 0.419 g/t gold, 17.35 g/t silver and 164 ppm molybdenum (5.56% CuEq) from 77.10m downhole depth (Figures 1 and 2).Elevated copper mineralization was intersected in eight of 11 drill holes reported today, hosted mainly in magnetite and garnet-diopside skarns and lesser within a multiphase intrusive complex. Dan Symons, President and CEO, stated, "We are pleased to report the results from the final six holes from the first phase program, as well as the first five holes from the continuing second phase at Khaleesi. The first phase 12-hole, 6,300m program was designed to test a 1,000m by 500m area to a vertical depth of approximately 400m. The goal was to confirm a hydrothermal system of scale. With copper mineralization intersected in all of the first 12 holes drilled at Khaleesi, we view the first phase program for this greenfield project as highly successful. The second phase of drilling is focused on vectoring towards the core or 'heat engine' of the system. With a strong treasury and up to 15,000m planned for the second phase drilling, we are well-positioned to continue systematic exploration and vectoring at Khaleesi. Separately, drilling is continuing on our porphyry copper and gold prospects in Jamaica."Figure 1: (Top) KHZ5825-003 Massive magnetite skarn cut by quartz-chalcopyrite-bornite veinlets and with disseminated chalcopyrite. The 1.7m interval assayed 0.67% copper, 0.063 g/t gold, 1.82 g/t silver and 122 ppm molybdenum from 370.9m to 372.6m downhole depth. (Middle) KHZ5790-001 Garnet-diopside skarn cut by pyrite-chalcopyrite mineralization. The 1.9m interval assayed 1.38% copper, 0.27 g/t gold, 7.14 g/t silver and 5 ppm molybdenum from 43.9m to 45.8m downhole depth. (Bottom) KHZ5790-001 garnet-diopside skarn with strong chalcopyrite mineralization, and cross-cutting quartz sulfides veinlets. The 1.4m interval assayed 4.91% copper, 0.42 g/t gold, 17.35 g/t silver and 164 ppm molybdenum from 77.1m to 73.5m downhole depth.To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/294813_c3fig1.jpgFigure 2. Slab photos of mineralized intervals. (Top) KHZ5825-003 at 362.7m downhole depth showing massive magnetite skarn with bornite and chalcopyrite. Assayed interval resulted in 1.05m at 2.03% Cu, 0.436 g/t Au, 8.89 g/t Ag and 27 ppm Mo. (Bottom) KHZ5790-001 at 77.5m downhole depth showing chalcopyrite and pyrite in magnetite-pyroxene-garnet skarn. Interval assayed 1.4m at 4.91% Cu, 0.419 g/t Au, 17.35 g/t Ag and 164 ppm Mo. To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/294813_0d300ab50439b89c_004full.jpgTable 1: Assay Results from 11 Drill Holes at Khaleesi, PeruHole IDFrom
(m)To
(m)Length
(m)Cu
(%)Au
(g/t)Ag
(g/t)Mo
(ppm)CuEq*
(%)KHZ5150-001
No Significant Assays
KHZ5500-00112.2027.8015.600.230.0100.41120.25KHZ5500-001271.70327.0055.300.190.0340.831080.28KHZ5550-00136.5081.5045.000.240.0460.99130.30KHZ5550-001113.30139.8026.500.330.0411.00290.40KHZ5550-001359.20386.4027.200.200.0110.5340.22KHZ5550-001420.30451.0030.700.160.0110.40120.18KHZ5675-001
No Significant Assays
KHZ5675-00215.1016.000.901.600.0090.3201.61KHZ5675-002168.80179.4010.600.180.0110.80330.22KHZ5675-002195.40210.3014.900.170.0060.39840.23KHZ5675-002245.60260.2014.600.160.0070.89210.18KHZ5775-002
No Significant Assays
KHZ5790-00113.6018.705.100.270.0551.68220.35KHZ5790-00140.1083.9043.800.470.0872.17480.59Including42.0045.803.801.490.2437.67171.80Including77.1078.501.404.910.41917.351645.56KHZ5790-00195.30129.0033.700.300.0140.63270.33KHZ5790-002346.10419.0072.900.290.0391.27220.35KHZ5790-002432.20455.1022.900.330.0340.89120.37KHZ5790-00314.5017.252.751.050.0829.1581.23KHZ5790-00335.0044.009.000.230.0431.6450.29KHZ5825-00229.1087.2058.100.290.0371.02430.36KHZ5825-00348.0075.0027.000.180.0210.60130.22KHZ5825-00390.00109.5019.500.170.0320.64530.23KHZ5825-003161.80162.801.002.090.0728.59272.26KHZ5825-003189.50233.0043.500.160.0210.57870.23KHZ5825-003275.00423.05148.050.340.0370.87780.42Including309.00423.05114.050.390.0421.02790.48 Notes
*Copper Equivalent (CuEq) for drill intersections is calculated based on three-year trailing average for each commodity (2023, 2024 and 2025) which equates to US$ 4.18/lb Cu, US$ 2,600/oz Au, US$ 30.54/oz Ag and US$ 21.46/lb Mo, with 80% metallurgical recoveries assumed for all metals. The formula is: CuEq % = Cu % + (0.907 x Au g/t) + (0.0107 x Ag g/t) + (0.00051 x Mo ppm). Since it is unclear what metals will be the principal products and as Khaleesi is an early-stage greenfield project with no metallurgical test work completed, assuming different recoveries is premature at this stage. As such an 80% recovery rate is justified.
Composite intervals are calculated using length weighted averages based on a combination of lithological breaks and copper assay values according to a 0.15% Cu cutoff and include a maximum of 12 meters of internal dilution. All intervals reported in this table are down hole core lengths, and true thicknesses have yet to be determined. Mineral resource modeling is required before true thicknesses can be estimated. Figure 3. Plan map on geology of the completed drill holes to date, with copper (Cu; oranges) and molybdenum (Mo; blues) mineralization plotted along the trace of the holes, projected to surface. A rough outline of mineralization is highlighted, as well as the current traces of the magnetite skarn body. Drill hole traces highlighted in yellow represent completed or in-progress drill holes pending assay results.To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/294813_0d300ab50439b89c_005full.jpgFigure 4. Cross-sections of the highlighted drill holes at the Khaleesi project in this release. (Left) KHZ5825-003 section showing higher-grade copper mineralization within a magnetite skarn and surrounding pyroxene skarn and diorite intrusion. (Right) KHZ5790-001 section showing the new shallow hole extending copper mineralization to near-surface, above an earlier hole that encountered 269.0m at 0.38% CuEq (0.30% Cu), with copper-mineralization in magnetite, garnet and pyroxene skarn, as well as veinlets within the diorite.To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/294813_0d300ab50439b89c_006full.jpgDrilling at Khaleesi is focused on systematically probing the Ferrobamba limestone and Andahuaylas-Yauri batholith contact zone that extends from north to south across the Khaleesi property. The northern magnetite skarn is starting to be defined in a curved shaped, open at depth and to the north, and likely off set in the south. Mineralization outside of the skarn occurs as thin veinlets of sulfides ± quartz, within the multi-stage intrusive complex and sedimentary limestone package. To date, the Company believes it has intersected six intrusive rock types along this corridor. Through geochronology studies (see press release dated March 9, 2026), it is interpreted that the intrusive rock types encountered to date are older than a meaningful mineralizing event at Khaleesi and are acting as conduits for mineralizing fluid to travel along the intrusive contacts to come to near surface. A primary goal of the second-phase drill program is to locate the 'causative intrusion', which if found, would date the same age as the younger mineralization (35.8 million years).The multiphase intrusives and undulating nature of the contact zone make the Khaleesi system geologically complex. In addition, outcrop is sporadic and much of the project area is under a thin layer of glacial till cover.Next StepsDrilling at Khaleesi will continue to focus on the batholith — limestone contact zone, where there is a well-developed and zoned skarn system that has been telescoped by epithermal veining that is possibly driven by a porphyry. At this contact zone is a multiphase intrusive complex that is generally covered by glacial till. Additional geophysical surveys both within and beyond the main Khaleesi area are being considered to assist with vectoring and to identify extensions of mineralization beyond the areas drilled to date. Surveys under consideration include drone magnetics, 3DIP and gravity. To date, approximately 11,000m of drilling has been completed in 24 holes with two additional holes in progress. Including today's announcement, assays have now been reported for the first 17 holes (see press releases dated December 15, 2025, January 21, 2026 and February 26, 2026). The Company looks forward to reporting additional assay results as they become available. About the Khaleesi ProjectThe Khaleesi project is located in the Andahuaylas-Yauri Belt in southeastern Peru, home to large copper skarn and porphyry deposits and operating mines such as Las Bambas (MMG), Constancia (Hudbay Minerals), Antapaccay (Glencore), and others (Figure 5).Figure 5: Regional map showing C3 Metals' mineral concession package in relation to other large-scale operations, development projects and exploration projects. To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/294813_0d300ab50439b89c_007full.jpgKhaleesi is located 8km west of the Company's Jasperoide Project, where the Company confirmed 13 skarn prospects along a 28km iron-skarn belt. Montana de Cobre ("MCZ") is the only skarn along the 28km iron-skarn belt that the Company has systematically drill tested to date, yielding a near surface Measured and Indicated Mineral Resource of 51.9 million tonnes at 0.50% total copper and 0.20 g/t gold for 569.1 million pounds of copper and 326,800 ounces of gold.1The Khaleesi project is situated along a highly favorable limestone-intrusive rock contact zone that bisects the tenement area and trends north-northeasterly. The limestone rock unit is part of the highly receptive Ferrobama Formation, and the intrusive rock comprises the well-known Andahuaylas-Yauri Batholith. At this contact zone is a multiphase intrusive complex that also appears to trend northeast-southwest, that follows and exploits the contact zone, which is mostly covered by a thin layer of glacial till. Stock Option GrantThe Company also announces that pursuant to its stock option plan approved by shareholders at its Annual General and Special meeting held on February 27, 2026, the Board of Directors has granted 2,779,750 stock options to directors, officers, employees and consultants of the Company. A total of 731,250 options will vest immediately, while 2,048,500 options will vest over a period of 12 months, subject to regulatory acceptance. After vesting, each incentive stock option will allow the holder to purchase one common share in the Company at a price of CAD$1.10. The incentive stock options have a term of five years, expiring April 29, 2031 or following the departure of the option-holder. Following this stock option grant, the Company will have a total of 8,625,120 stock options outstanding, representing approximately 6.88% of the outstanding common shares of the Company.For additional information, contact:Dan Symons
President and CEO
+1 416 716 6466
dsymons@c3metals.comABOUT C3 METALS INC.C3 Metals Inc. is a mineral exploration company focused on creating substantive value for its shareholders through the discovery and development of large copper and gold deposits. The Company holds approximately 31,000 hectares located in the prolific high-grade Andahuaylas-Yauri Porphyry-Skarn belt of Southern Peru, which contain the Company's Jasperoide and Khaleesi projects. Mineralization at Jasperoide is hosted in a similar geological setting to the nearby major mining operations at Las Bambas (MMG), Constancia (Hudbay) and Antapaccay (Glencore). At Jasperoide, the Company has identified over 13 skarn prospects and an outcropping porphyry system over two parallel 28km belts. The Company has published a maiden resource estimate on the first of these skarn targets, which contained Measured & Indicated Resources of 52Mt at 0.5% copper and 0.2 g/t gold1. The Company is also actively exploring in Jamaica where it has identified 16 porphyry, 40 epithermal and multiple volcanic redbed copper prospects over a 30km strike extent. The Company holds a 100% interest in 17,855 hectares of exploration licenses, of which Freeport-McMoRan Exploration Corporation, a wholly-owned affiliate of Freeport-McMoRan Inc. (NYSE: FCX), has the option on 13,020 hectares to earn up to a 75% interest by funding up to US$75 million of exploration and project related expenditures. The Company also holds a 50% interest in 9,870 hectares in a joint venture with Geophsyx Jamaica Ltd, the largest mineral tenure holder in the country. Barrick Mining Corp. announced on May 1, 2024 that it had entered into an earn-in agreement with Geophysx Jamaica Ltd. on approximately 400,000 hectares of exploration licenses, several of which surround C3 Metals' mineral concessions. Mining is currently the second largest industry in Jamaica, and historical mining dates back to the colonial eras of the 1500s (Spanish) and 1800s (British). Related Link: www.c3metals.comNeither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.QP StatementStephen Hughes, P.Geo. is Vice President Exploration and a Director for C3 Metals and is a Qualified Person as defined by National Instrument 43-101. Mr. Hughes has reviewed the technical information in this news release and approves the written disclosure contained herein. Copper Equivalent FormulaCopper Equivalent (CuEq) for drill intersections is calculated based on three-year trailing average for each commodity (2023, 2024 and 2025) which equates to US$ 4.18/lb Cu, US$ 2,600/oz Au, US$ 30.54/oz Ag and US$ 21.46/lb Mo, with 80% metallurgical recoveries assumed for all metals. The formula is: CuEq % = Cu % + (0.907 x Au g/t) + (0.0107 x Ag g/t) + (0.00051 x Mo ppm). Since it is unclear what metals will be the principal products and as Khaleesi is an early-stage greenfield project with no metallurgical test work completed, assuming different recoveries is premature at this stage. As such an 80% recovery rate is justified.Technical ProgramC3 Metals adheres to a strict QA/QC protocol for handling, sampling, sample transportation and analyses. Chain-of-custody protocols are designed to ensure security of samples until their delivery at the laboratory. Samples were cut at C3 Metals' Khaleesi Project camp, Cusco Region, Perú, by Company personnel. Before entering the cutting room, the drill core samples are marked lengthwise with a yellow line, and the core saw followed these lines to cut each sample. Diamond drill core was sampled in maximum 3-metre intervals, stopping at geological boundaries, and using a rock saw. Core diameter is a mix of PQ3 and HQ3, depending on the depth of the drill hole. Samples were bagged, tagged and packaged for shipment via local freight transport service to the ALS preparation laboratory in Arequipa, Arequipa Region, Perú. Entire samples were dried and weighed, then crushed to 85% passing 10 mesh (2mm). From this, a 1.5 kg split was pulverized to 90% passing 200 mesh (75µm). The prepared, pulp samples were sent via ALS to the ALS assay laboratory in Lima, Lima Region, Perú, for copper, gold and multi-element analysis. ALS is an accredited laboratory which is independent of the Company. Gold assays were done by fire assay fusion (Au-AA23) with AAS finish on a 30g sample. Copper was assayed by ICP-AES following a 4-acid digestion via the ME-MS61r package for a suite of 60 elements. Any copper sample over detection limit (i.e., greater than 10,000ppm or 1% Cu) was additionally assayed via ICP-AES using the package ME-OG62. High and low copper, gold and iron standards, as well as blanks and duplicates (coarse crush split and pulp), were randomly inserted into the sampling sequence for quality control. On average, 11% of the submitted samples are quality control samples. No data quality problems were indicated by the QA/QC program.Caution Regarding Forward-Looking StatementsCertain statements contained in this press release constitute forward-looking information. These statements relate to future events or future performance. The use of any of the words "could", "intend", "expect", "believe", "will", "projected", "estimated" and similar expressions and statements relating to matters that are not historical facts are intended to identify forward-looking information and are based on the Company's current belief or assumptions as to the outcome and timing of such future events. Actual future results may differ materially. Although such statements are based on reasonable assumptions of the Company's management, there can be no assurance that any conclusions or forecasts will prove to be accurate.While the Company considers these assumptions to be reasonable based on information currently available, they may prove to be incorrect. Forward-looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include risks inherent in the exploration and development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and the worldwide demand for and supply of minerals, risks related to increased competition and current global financial conditions, access and supply risks, reliance on key personnel, operational risks, and regulatory risks, including risks relating to the acquisition of the necessary licenses and permits, financing, capitalization and liquidity risks.The forward-looking information contained in this release is made as of the date hereof, and the Company is not obligated to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by applicable securities laws. Because of the risks, uncertainties and assumptions contained herein, investors should not place undue reliance on forward-looking information. The foregoing statements expressly qualify any forward-looking information contained herein.1 Based on the assumptions and parameters outlined in the NI 43-101 Technical Report titled Jasperoide Copper-Gold Project Cusco Region, Peru dated July 5, 2023.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/294813
Original: C3 Metals Continues to Intersect Broad Zones of Near-Surface Copper Mineralization at the Khaleesi Project, Peru
CA Market News
3月前
CEO.CA Insights: Exclusive Interviews from Mining Leaders at PDAC 2026March 20, 2026 7:00 AM
NewsfileToronto, Ontario--(Newsfile Corp. - March 20, 2026) - CEO.CA, the leading investor social network in junior resource and venture stocks, shares comprehensive video coverage from the recent PDAC convention in Toronto, ON, Canada.Founded in 2012, CEO.CA, a wholly owned subsidiary of EarthLabs, Inc., is one of the most popular free financial websites and apps in Canada and for investors globally - with industry leading audience engagement and mobile functionality. Millions of people visit CEO.CA each year to connect with investors from around the world, share knowledge and view impactful stories about stocks, commodities, and emerging companies.As a media partner at investor events around the world, CEO.CA provides coverage of the companies shaping the future of mining, meeting with industry leaders to learn more about their vision and strategy.Get to Know the Leaders Transforming the Future of MiningTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9758/289303_5b6cdcdb7476ea55_001full.jpgTo view the PDAC Conference Interviews, please visit: https://www.youtube.com/watch?v=T0cAdXZUP10&list=PLsD-m-bMQxKbst4Udrum54ymBRMrb-TK7 Battery MetalsPeloton Minerals (CSE: PMC) (OTCQB: PMCCF)St George Mining (ASX: SGQ)Surge Battery Metals (TSXV: NILI) (OTCQX: NILIF) (FSE: DJ5)Copper:Algo Grande Copper (TSXV: ALGR) (OTC Pink: KNDYF) (FSE: KM00)Barksdale Resources (TSXV: BRO) (OTCQB: BRKCF) (FSE: 2NZ)C3 Metals (TSXV: CCCM)Element 29 Resources (TSXV: ECU) (OTCQB: EMTRF) (BVL: ECU)Gunnison Copper (TSX: GCU) (OTCQB: GCUMF) (FSE: 3XS0)Midnight Sun (TSXV: MMA) (OTCQX: MDNGF)Mogotes Metals (TSXV: MOG) (OTCQB: MOGMF) (FSE: OY4)Sendero Resources (TSXV: SEND)Critical MetalsAntimony Resources (CSE: ATMY) (OTCQB: ATMYF) (FSE: K8J0)Nine Mile Metals (CSE: NINE) (OTC PINK: VMSXF) (FSE: KQ9)Scandium Canada (TSXV: SCD)ValOre Metals (TSXV: VO) (OTCQB: KVLQF) (FSE: KEQ0)West High Yield Resources (TSXV: WHY) (FSE: W0H)Gold:Alamos Gold (TSX: AGI) (NYSE: AGI)Amex Exploration (TSXV: AMX) (FSE: MX0) (OTCQX: AMXEF)Bold Ventures (TSXV: BOL)Delta Resources (TSXV: DLTA) (OTC Pink: DTARF) (FSE: 6GO1)Dryden Gold (TSXV: DRY) (OTCQB: DRYGF) (FSE: X7W)Eminent Gold (TSXV: EMNT) (OTCQB: EMGDF) (FSE: 7AB)Emperor Metals (CSE: AUOZ) (OTCQB: EMAUF) (FSE: 9NH)Falco Resources (TSXV: FPC)Golden Cariboo Resources (CSE:GCC) (OTCQB: GCCFF) (WKN: A402CQ) (FSE: 3TZ)McFarlane Lake Mining (CSE: MLM) (OTCQB: MLMLF)Mineros SA (TSX: MSA) (OTCQX: MNSAF) (BVC: MINEROS)Newcore Gold (TSXV: NCAU) (OTCQX: NCAUF)Northstar Gold (CSE: NSG)Ridgeline Minerals (TSXV: RDG) (OTCQB: RDGMF) (FSE: 0GC0)Rua Gold (TSX: RUA) (NZ: RGI) (OTCQX: NZAUF)Talisker Resources (TSX: TSK) (OTCQX: TSKFF)Thesis Gold & Silver (TSXV: TAU) (OTCQX: THSGF) (FSE: A422AH)TomaGold (TSXV: LOT) (OTC Pink: TOGOF)Polymetallic:Aurania Resources (TSXV: ARU) (OTCQB: AUIAF) (FSE: 20Q)Spartan Metals (TSXV: W) (OTCQB: SPRMF) (FSE: J03)Royalty Streaming:Ecora Resources (LSE: ECOR) (TSX: ECOR) (OTCQX: ECRAF)Electric Royalties (TSXV: ELEC) (OTCQB: ELECF)Silver:GR Silver Mining (TSXV: GRSL) (OTCQX: GRSLF) (FSE: GPE)Honey Badger Silver (TSXV: TUF) (OTCQB: HBEIF)Pinnacle Silver and Gold (TSXV: PINN) (OTCID: PSGCF) (FSE: P9J)Silver Hammer Mining (CSE: HAMR)Silvercorp Metals (TSX: SVM) (NYSE American: SVM)Uranium:Nexus Uranium (CSE: NEXU) (OTCQB: NEXUF) (FSE: JA7)Other:Karen Rees, PDAC PresidentRick Rule, Founder and CEO of Rule Investment MediaAbout CEO.CAThe leading community for investors & traders in junior resource & venture stocks. CEO.CA is one of the most popular free financial websites and apps in Canada and for small-cap investors globally -- with industry leading audience engagement and mobile functionality. Since 2012, CEO.CA has brought millions of investors together from over 164 countries to discuss their portfolio holdings and find new investment opportunities. Download our App on iOS or Android marketplace or visit us today at CEO.CA to set up your free account.CEO.CA is a wholly owned subsidiary of EarthLabs, Inc.For further information, please contact:CEO.CA
Email: hello@ceo.ca
Website: CEO.CANeither the TSX Venture Exchange ("TSXV"), OTC Best Market ("OTCQX") nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.Cautionary StatementThe information regarding any issuer contained or referred to in any interviews conducted by CEO.CA has been furnished by such issuer directly, and neither CEO.CA nor any of its affiliates or principals assumes any responsibility for the accuracy or completeness of such information or for any failure by an issuer to ensure disclosure of events or facts which may affect the significance or accuracy of any such information.No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. This news release contains forward-looking information which involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects, and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward-looking information in this news release may include, but is not limited to, the objectives, goals, future plans, statements regarding exploration results and exploration and/or development plans of companies featured on the CEO.CA platform. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, capital and operating costs varying significantly from estimates, the preliminary nature of metallurgical test results, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, uncertainties relating to the availability and costs of financing needed in the future, changes in equity markets, inflation, fluctuations in commodity prices, delays in the development of projects, currency risk and the other risks involved in the applicable exploration and development industry, and those risks set out in the public documents of such companies filed on SEDAR+ or elsewhere from time to time. Undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. CEO.CA disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/289303
Original: CEO.CA Insights: Exclusive Interviews from Mining Leaders at PDAC 2026
CA Market News
3月前
C3 Metals Confirms Age of Mineralization at Khaleesi Copper Project, Peru is the Same as the Large Las Bambas and Antapaccay Copper DepositsMarch 9, 2026 7:00 AM
NewsfileToronto, Ontario--(Newsfile Corp. - March 9, 2026) - C3 Metals Inc. (TSXV: CCCM) (OTCQB: CUAUF) ("C3 Metals" or the "Company") is pleased to announce geochronology (age date) results at its 100%-owned Khaleesi copper project ("Khaleesi" or "the Project") in southern Peru. The geochronological age of porphyry-style copper deposits is critically important for both mineral exploration and scientific understanding. The "correct" age for mineralization of this type facilitates the understanding of the occurrence and enhances the significance of the discovery when ranked against other projects in the region. Copper-molybdenum-gold skarn and porphyry-style mineralization was discovered by C3 Metals during regional exploration mapping and sampling. As part of the exploration process, the Company recently undertook a geochronological (age dating) program to better understand the relationships between the intrusive phases, skarn alteration and copper + molybdenum mineralization. Khaleesi Geochronology HighlightsKhaleesi is located along the major copper producing Andahuaylas-Yauri Skarn and Porphyry belt where the known porphyry and skarn mineralization lies within a broad range of 39.5 ± 1.1 to 28.7 ± 0.8 Ma ("age in millions of years") (Perelló et al., 2003). Khaleesi has no absolute geochronological constraints, but with this new data, the molybdenite mineralization age is inferred to be ~35.8 Ma and therefore younger than the gabbroic-diorite intrusives encountered in early drill testing.Molybdenite age dating results indicate one of the Khaleesi hydrothermal events is within the same time frame as nearby porphyry and skarn deposits, such as the large Las Bambas and Antapaccay (Coroccohuaya) deposits.The geochronology data suggests there is a multi-phase (or long-lived hydrothermal system) at Khaleesi, and therefore a younger event that could be causing some of the copper + molybdenum mineralization.Dan Symons, President and CEO, stated, "It might be seen as unusual to be excited to be announcing the age of a mineral system. However, there is considerable evidence that the best porphyry and skarn systems along the Andahuaylas-Yauri belt in Peru are typically between 40 and 30 million years old. Even before we drilled a hole at Khaleesi, several major mining companies were particularly keen to understand the age of our mineralization. The results of this dating program indicate the molybdenum mineralization is approximately 35.8 million years – the same age range as both the nearby Las Bambas and Antapaccay deposits operated by MMG and Glencore, respectively. Importantly, the multiphase diorite intrusives encountered in early-stage drilling dated approximately 40.1 million years old. This means the diorite intrusives are not stoping out mineralization but instead are acting as important conduits to allow mineralization to travel up the intrusive contacts to near surface. This is the exact result we were hoping for."A total of five samples were collected for zircon U-Pb, garnet U-Pb and molybdenite Re-Mo age dating. Two samples were collected from gabbroic-diorite intrusives of the Andahuaylas-Yauri batholith outcropping at Khaleesi, one sample from the garnet skarn and two samples of molybdenite mineralization from quartz + molybdenite + chalcopyrite veinlets in gabbroic-diorite and magnetite skarn. The geochronological work reports the gabbroic-diorite (batholith) having U-Pb ages of 40.12 ± 0.23 Ma and 39.33 ± 0.31 Ma. The garnet (skarn) sample returned a U-Pb age of 40.5 ± 1.8 Ma, a similar age to the gabbroic-diorite. Two Re-Os age dates from molybdenite within veinlets cross-cutting the gabbroic-diorite and the magnetite skarn, reported ages of 35.67 ± 0.20 Ma and 35.92 ± 0.21 Ma. Of particular importance are the ages reported from molybdenite in quartz veinlets, which reported ages aligned with those from nearby large copper mines and deposits (Figure 1), such as MMG's Las Bambas mine, located approximately 35km west of Khaleesi, and Glencore's Antapaccay mine (Coroccohuayco). The older ages reported for garnet and diorite fall within the lower/older ages of the known mineralization of the Andahuaylas-Yauri belt (Figure 1). The prograde garnet and retrograde magnetite skarn mineralization at Khaleesi is thus likely an older event, related to the gabbroic diorite, which was then overprinted on by a younger copper-gold mineralizing event that brought in quartz + copper sulfide + molybdenite veinlets. Figure 1. Ages of the Andahuaylas-Yauri Belt deposits with new Khaleesi age dates shown at bottom for comparison. Figure modified from compilation in Garay-Maureira (2020). References for age dates listed are as follows: 1 – Noble et al. (1984); 2 – Perelló et al. (2003); 3 – Chelle-Michou et al. (2015); 4 – Cernuschi (2015); 5 – Wise et al. (2017). Ages all in million years (Ma).To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2661/286543_b451b36f948d08d1_001full.jpgSamples were selected from Khaleesi surface outcrops and drill holes and sent to universities for age dating. The zircon and garnet U-Pb age dating was done at the FiLTER lab at the University of British Columbia Okanagan, in Kelowna, Canada. The molybdenite Re-Os age dating was done at the University of Alberta, in Edmonton, Canada.Drilling ContinuesThe Company has completed 12 drill holes for 6,300m with copper reported or observed in all 12 holes over a 1,000m by 500m footprint (see press releases dated December 15, 2025, January 21, 2026 and February 26, 2026). An additional 15,000m drill program in 25 to 30 holes is expected to be completed by the end of 2026. Currently, six holes are pending assays with two additional holes in progress. For additional information, contact:Dan Symons
President and CEO
+1 416 716 6466
dsymons@c3metals.comABOUT C3 METALS INC.C3 Metals Inc. is a mineral exploration company focused on creating substantive value for its shareholders through the discovery and development of large copper and gold deposits. The Company holds approximately 31,000 hectares located in the prolific high-grade Andahuaylas-Yauri Porphyry-Skarn belt of Southern Peru, which contain the Company's Jasperoide and Khaleesi projects. Mineralization at Jasperoide and Khaleesi is hosted in a similar geological setting to the nearby major mining operations at Las Bambas (MMG), Constancia (Hudbay) and Antapaccay (Glencore). At Jasperoide, the Company has identified 13 skarn prospects a 28km belt. The Company has published a maiden resource estimate on the first of these skarn targets, which contained Measured & Indicated Resources of 52Mt at 0.5% copper and 0.2 g/t gold1. The Company is also actively exploring in Jamaica where it has identified 16 porphyry, 40 epithermal and multiple volcanic redbed copper prospects over a 30km strike extent. The Company holds a 100% interest in 17,855 hectares of exploration licenses, of which Freeport-McMoRan Exploration Corporation, a wholly-owned affiliate of Freeport-McMoRan Inc. (NYSE: FCX), has the option on 13,020 hectares to earn up to a 75% interest by funding up to US$75 million of exploration and project related expenditures. The Company also holds a 50% interest in 9,870 hectares in a joint venture with Geophsyx Jamaica Ltd, the largest mineral tenure holder in the country. Barrick Mining Corp. announced on May 1, 2024 that it had entered into an earn-in agreement with Geophysx Jamaica Ltd. on approximately 400,000 hectares of exploration licenses, several of which surround C3 Metals' mineral concessions. Mining is currently the second largest industry in Jamaica, and historical mining dates back to the colonial eras of the 1500s (Spanish) and 1800s (British). Related Link: www.c3metals.comNeither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.QP StatementStephen Hughes, P.Geo. is Vice President Exploration and a Director for C3 Metals and is a Qualified Person as defined by National Instrument 43-101. Mr. Hughes has reviewed the technical information in this news release and approves the written disclosure contained herein. Technical ProgramC3 Metals adheres to a strict QA/QC protocol for handling, sampling, sample transportation and analyses. Chain-of-custody protocols are designed to ensure security of samples until their delivery at the laboratory. Samples were cut at C3 Metals' Khaleesi Project camp, Cusco Region, Perú, by Company personnel. Before entering the cutting room, the drill core samples are marked lengthwise with a yellow line, and the core saw followed these lines to cut each sample. Diamond drill core was sampled in maximum 3-metre intervals, stopping at geological boundaries, and using a rock saw. Core diameter is a mix of PQ3 and HQ3, depending on the depth of the drill hole. Samples were bagged, tagged and packaged for shipment via local freight transport service to the ALS preparation laboratory in Arequipa, Arequipa Region, Perú. Entire samples were dried and weighed, then crushed to 85% passing 10 mesh (2mm). From this, a 1.5 kg split was pulverized to 90% passing 200 mesh (75µm). The prepared, pulp samples were sent via ALS to the ALS assay laboratory in Lima, Lima Region, Perú, for copper, gold and multi-element analysis. ALS is an accredited laboratory which is independent of the Company. Gold assays were done by fire assay fusion (Au-AA23) with AAS finish on a 30g sample. Copper was assayed by ICP-AES following a 4-acid digestion via the ME-MS61r package for a suite of 60 elements. Any copper sample over detection limit (i.e., greater than 10,000ppm or 1% Cu) was additionally assayed via ICP-AES using the package ME-OG62. High and low copper, gold and iron standards, as well as blanks and duplicates (coarse crush split and pulp), were randomly inserted into the sampling sequence for quality control. On average, 11% of the submitted samples are quality control samples. No data quality problems were indicated by the QA/QC program.Caution Regarding Forward-Looking StatementsCertain statements contained in this press release constitute forward-looking information. These statements relate to future events or future performance. The use of any of the words "could", "intend", "expect", "believe", "will", "projected", "estimated" and similar expressions and statements relating to matters that are not historical facts are intended to identify forward-looking information and are based on the Company's current belief or assumptions as to the outcome and timing of such future events. Actual future results may differ materially. Although such statements are based on reasonable assumptions of the Company's management, there can be no assurance that any conclusions or forecasts will prove to be accurate.While the Company considers these assumptions to be reasonable based on information currently available, they may prove to be incorrect. Forward-looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include risks inherent in the exploration and development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and the worldwide demand for and supply of minerals, risks related to increased competition and current global financial conditions, access and supply risks, reliance on key personnel, operational risks, and regulatory risks, including risks relating to the acquisition of the necessary licenses and permits, financing, capitalization and liquidity risks.The forward-looking information contained in this release is made as of the date hereof, and the Company is not obligated to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by applicable securities laws. Because of the risks, uncertainties and assumptions contained herein, investors should not place undue reliance on forward-looking information. The foregoing statements expressly qualify any forward-looking information contained herein.1 Based on the assumptions and parameters outlined in the NI 43-101 Technical Report titled Jasperoide Copper-Gold Project Cusco Region, Peru dated July 5, 2023.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/286543
Original: C3 Metals Confirms Age of Mineralization at Khaleesi Copper Project, Peru is the Same as the Large Las Bambas and Antapaccay Copper Deposits
CA Market News
4月前
C3 Metals Announces Closing of $28,000,500 Bought Deal Private PlacementFebruary 11, 2026 9:29 AM
NewsfileToronto, Ontario--(Newsfile Corp. - February 11, 2026) - C3 Metals Inc. (TSXV: CCCM) ("C3 Metals" or the "Company") is pleased to announce that, further to its press releases of January 21, 2026 and January 22, 2026, it has closed its bought deal private placement of 25,455,000 common shares in the capital of the Company (the "Shares") at a price of C$1.10 per Share for gross proceeds of $28,000,500 (the "Offering"), which includes the exercise of the over-allotment option. The Offering was conducted pursuant to the terms and conditions of an underwriting agreement entered into between the Company, Paradigm Capital Inc., as lead underwriter, ATB Cormark Capital Markets, Canaccord Genuity Corp. and BMO Nesbitt Burns Inc. (collectively, the "Underwriters"). As consideration for the services provided by the Underwriters in connection with the Offering, the Company paid the Underwriters a fee of $1,680,030, equal to 6% of the proceeds of the Offering.The Company intends to use the net proceeds of the Offering for exploration and development activities at the Company's 100%-owned Khaleesi Copper-Gold project, for exploration and development activities at the Company's 50%-owned Super Block project, and general working capital purposes.All securities issued in connection with the Offering are subject to a statutory hold period ending June 12, 2026. The Offering is subject to the final acceptance of the TSX Venture Exchange.The Offering constituted a related party transaction within the meaning of TSX Venture Exchange Policy 5.9 and Multilateral Instrument 61-101 - Protection of Minority Security Holders in Special Transactions ("MI 61-101") as an insider of the Company acquired 3,864,000 Shares pursuant to the Offering. The Company is relying on the exemptions from the valuation and minority shareholder approval requirements of MI 61-101 contained in sections 5.5(b) and 5.7(1)(a) of MI 61-101, as the Company is not listed on a specified market and the fair market value of the participation in the Offering by the insider does not exceed 25% of the market capitalization of the Company in accordance with MI 61-101. The Company did not file a material change report in respect of the related party transaction at least 21 days before the closing of the Offering, which the Company deems reasonable in the circumstances in order to complete the Offering in an expeditious manner.The securities offered have not been registered under the United States Securities Act of 1933, as amended ("U.S. Securities Act"), or any securities laws of any state of the United States, and may not be offered or sold in the United States or to, or for the account or benefit of, a U.S. person absent registration or an exemption from such registration requirements. This press release shall not constitute an offer to sell or the solicitation of an offer to buy in the United States or to, or for the account or benefit of, a U.S. person nor shall there be any sale of the securities in any state of the United States in which such offer, solicitation or sale would be unlawful. "United States" and "U.S. persons" are as defined in Regulation S under the U.S. Securities Act.For additional information, contact: Dan Symons
President and CEO
+1 416 716 6466
dsymons@c3metals.comABOUT C3 METALS INC.C3 Metals Inc. is a mineral exploration company focused on creating substantive value for its shareholders through the discovery and development of large copper and gold deposits. The Company holds approximately 31,000 hectares located in the prolific high-grade Andahuaylas-Yauri Porphyry-Skarn belt of Southern Peru, which contain the Company's Jasperoide and Khaleesi projects. Mineralization at Jasperoide is hosted in a similar geological setting to the nearby major mining operations at Las Bambas (MMG), Constancia (Hudbay) and Antapaccay (Glencore). At Jasperoide, the Company has identified over 13 skarn prospects and an outcropping porphyry system over two parallel 28km belts. The Company has published a maiden resource estimate on the first of these skarn targets, which contained Measured & Indicated Resources of 52Mt at 0.5% copper and 0.2 g/t gold[1]. The Company is also actively exploring in Jamaica where it has identified 16 porphyry, 40 epithermal and multiple volcanic redbed copper prospects over a 30km strike extent. The Company holds a 100% interest in 17,855 hectares of exploration licenses, of which Freeport-McMoRan Exploration Corporation, a wholly-owned affiliate of Freeport-McMoRan Inc. (NYSE: FCX), has the option on 13,020 hectares to earn up to a 75% interest by funding up to US$75 million of exploration and project related expenditures. The Company also holds a 50% interest in 9,870 hectares in a joint venture with Geophsyx Jamaica Ltd, the largest mineral tenure holder in the country. Barrick Mining Corp. announced on May 1, 2024 that it had entered into an earn-in agreement with Geophysx Jamaica Ltd. on approximately 400,000 hectares of exploration licenses, several of which surround C3 Metals' mineral concessions. Mining is currently the second largest industry in Jamaica, and historical mining dates back to the colonial eras of the 1500s (Spanish) and 1800s (British).Related Link: www.c3metals.comCaution Regarding Forward-Looking StatementsCertain statements contained in this press release constitute forward-looking information. These statements relate to future events or future performance. The use of any of the words "could", "intend", "expect", "believe", "will", "projected", "estimated" and similar expressions and statements relating to matters that are not historical facts are intended to identify forward-looking information and are based on the Company's current belief or assumptions as to the outcome and timing of such future events. Actual future results may differ materially. In particular, this release contains forward-looking information relating to, among other things, the use of proceeds from the Offering, and the receipt of final approval of the TSX Venture Exchange. Those assumptions and factors are based on information currently available to the Company. Although such statements are based on reasonable assumptions of the Company's management, there can be no assurance that any conclusions or forecasts will prove to be accurate.While the Company considers these assumptions to be reasonable based on information currently available, they may prove to be incorrect. Forward-looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include risks relating to obtaining necessary approvals for the Offering, risks inherent in the exploration and development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and the worldwide demand for and supply of minerals, risks related to increased competition and current global financial conditions, access and supply risks, reliance on key personnel, operational risks, and regulatory risks, including risks relating to the acquisition of the necessary licenses and permits, financing, capitalization and liquidity risks.The forward-looking information contained in this release is made as of the date hereof, and the Company is not obligated to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by applicable securities laws. Because of the risks, uncertainties and assumptions contained herein, investors should not place undue reliance on forward-looking information. The foregoing statements expressly qualify any forward-looking information contained herein.Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.[1] Based on the assumptions and parameters outlined in the NI 43-101 Technical Report titled Jasperoide Copper-Gold Project Cusco Region, Peru dated July 5, 2023.NOT FOR DISTRIBUTION TO UNITED STATES NEWSWIRE SERVICES
OR FOR DISSEMINATION IN THE UNITED STATESTo view the source version of this press release, please visit https://www.newsfilecorp.com/release/283557
Original: C3 Metals Announces Closing of $28,000,500 Bought Deal Private Placement