EMCORE’s New SDI170 IMU Achieves Early Success with Initial Shipments to U.S. and International Customers
2021年10月28日 - 9:30PM
EMCORE Corporation (Nasdaq: EMKR), a leading provider of advanced
mixed-signal products that serve the aerospace & defense,
communications, and sensing markets, announced today that its new
SDI170 MEMS (Micro-Electromechanical Systems) Tactical Grade
Inertial Measurement Unit (IMU) has achieved enthusiastic market
reception and early technical success. Initial low-rate production
units have been confirmed by U.S. and international customers to be
seamless form, fit, and function replacements for the HG1700-AG58
Ring Laser Gyroscope (RLG) IMU.
Customer testing of the SDI170 IMU has been resoundingly
positive. “The parameters of the SDI170 tested are satisfactory.
All the parameters (noise, bias stability and repeatability, scale
factor repeatability, misalignment repeatability) are in the range
of specification of the SDI170,” reported a key customer that
performed extensive testing. “We found that the SDI170’s interfaces
are exactly compatible with the HG1700. In our tests, we were able
to directly use the previously prepared mechanical interfaces,
cabling, and data acquisition software for the HG1700.”
“We are extremely pleased that our customers have reported that
the SDI170 production units have met all their requirements for
compatibility and performance,” said Albert Lu, EMCORE’s Senior
Vice President and General Manager, Aerospace and Defense. “We had
high expectations this would be the case following EMCORE’s
completion of extensive internal DVT (Design Verification Testing)
of the SDI170 before its introduction in April 2021 to confirm
compatibility to replace legacy products.”
EMCORE is currently completing an extended qualification ahead
of full-rate production scheduled for release in November. In
addition, a memorandum of understanding was recently achieved with
a key international customer for a significant volume of units --
upon completion of customer qualification, deliveries are expected
to begin in 2022.
For further information and specifications on EMCORE’s SDI170
IMU and our complete line of navigation products, call +1
866-234-4976; e-mail: navigation-sales@emcore.com; or visit us on
the web: www.emcore.com/nav.
About EMCORE EMCORE Corporation is a leading
provider of advanced mixed-signal products that serve the aerospace
& defense, navigation, fiber optic communications, and sensing
markets. Our best-in-class components and systems support a
broad array of applications including navigation and inertial
sensing, defense optoelectronics, broadband communications, optical
sensing, and specialty chips for telecom and data center. We
leverage industry-leading Quartz MEMS, Lithium Niobate, and Indium
Phosphide chip-level technology to deliver state-of-the-art
component and system-level products across our end-market
applications. EMCORE has vertically-integrated manufacturing
capability at its wafer fabrication facility in Alhambra, CA, and
Quartz MEMS manufacturing facility in Concord, CA. Our
manufacturing facilities maintain ISO 9001 quality management
certification, and we are AS9100 aerospace quality certified at our
facility in Concord. For further information about EMCORE, please
visit http://www.emcore.com.
Forward-looking statements:The information
provided herein may include forward-looking statements within the
meaning of Section 27A of the Securities Act of 1933 and Section
21E of the Securities Exchange Act of 1934, as amended. Such
statements include statements regarding EMCORE's plans, strategies,
business prospects, growth opportunities, changes, and trends in
our business and expansion into new markets. These forward-looking
statements are based on management's current expectations,
estimates, forecasts, and projections about EMCORE and are subject
to risks and uncertainties that could cause actual results and
events to differ materially from those stated in the
forward-looking statements, including without limitation, the
following: (a) uncertainties regarding the effects of the COVID-19
pandemic and the impact of measures intended to reduce its spread
on our business and operations, which is evolving and beyond our
control; (b) the rapidly evolving markets for EMCORE's products and
uncertainty regarding the development of these markets; (c)
EMCORE's historical dependence on sales to a limited number of
customers and fluctuations in the mix of products and customers in
any period; (d) delays and other difficulties in commercializing
new products; (e) the failure of new products: (i) to perform as
expected without material defects, (ii) to be manufactured at
acceptable volumes, yields, and cost, (iii) to be qualified and
accepted by our customers, and (iv) to successfully compete with
products offered by our competitors; (f) uncertainties concerning
the availability and cost of commodity materials and specialized
product components that we do not make internally; (g) actions by
competitors; and (h) other risks and uncertainties discussed under
Item 1A - Risk Factors in our Annual Report on Form 10-K for the
fiscal year ended September 30, 2020, as updated by our subsequent
periodic reports. Forward-looking statements contained in this
press release are made only as of the date hereof, and EMCORE
undertakes no obligation to update or revise the forward-looking
statements, whether as a result of new information, future events
or otherwise.
Contact:EMCORE
CorporationDavid WojciechowskiVice President of Sales,
Marketing and Business Development(626)
293-3715davewojo@emcore.com
InvestorTom MinichielloChief Financial
Officer(626) 293-3400investor@emcore.com
MediaJoel CounterDirector, Corporate &
Marketing Communications(626) 999-7017media@emcore.com
EMCORE (NASDAQ:EMKR)
過去 株価チャート
から 6 2024 まで 7 2024
EMCORE (NASDAQ:EMKR)
過去 株価チャート
から 7 2023 まで 7 2024