Golden Tag Resources Ltd. (“
Golden Tag” or the
"
Company") (TSX.V: GOG) (OTCQB: GTAGF) is pleased
to announce complete results from diamond drillholes 21-62 and
22-63, part of the ongoing exploration program at the Company’s
100% owned San Diego Project, located in Durango Mexico.
Key highlights from holes 21-62 &
22-63 include:
- High-grade intersection of
1,095 g/t Ag.Eq over 0.6 metres (“m”) within the CSplay Zone,
located ~ 75 m SW and 75 m vertically below similar results as
published on February 15, 2022. The CSplay Zone has a minimum
vertical strike length of 300 m and follow up drilling is being
planned.
- 541 g/t Ag.Eq over 1.66 m,
within a broader interval of 166 g/t Ag.Eq over 10.15 m, in the
Canta Zone.
- Several other high-grade
intersections, located close to surface, including 244 g/t Ag.Eq
over 1.75 m, 182 g/t Ag.Eq over 2.00 m, 504 g/t Ag.Eq over 1.20 m,
and 295 g/t Ag.Eq over 2.10 m.
Greg McKenzie, President and CEO commented: "The
two holes reported today showcase how the San Diego Project can
deliver exceptionally high-grade mineralization, relatively close
to surface. During Q1/22 we have now reported a total of four
high-grade intersections each in excess of 1,000 g/t Ag.Eq, from
within the CSplay Zone which has a known vertical strike of length
of 300 m. We are also pleased with the additional high-grade
results within the Montanez and the 57 Target area.”
Hole 21-62 & 22-63
Holes 21-62 and 22-63 were drilled at a shallow
dip (-45 degrees) to test an area north of the 57 Target, a series
of epithermal breccias and quartz-carbonate vein mineralization
which returned 72 g/t Ag.Eq over 273.7 m, including 861 g/t Ag.Eq
over 10.0 m, as previously reported in news releases dated
September 8 and May 27, 2021 discussing hole 21-57 (see Figure
1)(1). Mineralization within the 57 Target is a complex interplay
of several vein trends proximal to the southern contact of the
Central Diorite, notably late-stage northeast trending epithermal
veins intersecting with the west-northwest trending San Jose Zone
system of quartz-sulfide veins with associated albite alteration.
The Company is currently following up with detail surface mapping
to better understand the geometry of the 57 Target
mineralization.
The San Jose Zone was intersected at the top of
both holes with hole 21-62 returning 244 g/t Ag.Eq over
1.75 m (13.95 to 15.70 m) and hole 22-63 returning 178 g/t
Ag.Eq over 0.75 m (15.00 to 15.75 m). Several northeast trending
epithermal quartz-carbonate-sulfide veins were intersected within
the Central Diorite in both holes. The most notable of these
intersections was within Zone 57 NE B which returned 504
g/t Ag.Eq over 1.20 m (162.50 to 163.70 m) in hole 21-62
and 295 g/t Ag.Eq over 2.10 m (213.40 to 215.50 m)
in hole 22-63. Zone 57 NE A returned 182 g/t Ag.Eq over 2.0 m
(114.50 to 116.50 m) in hole 21-62 and 158 g/t Ag.Eq over 0.70 m
(142.50 to 143.20 m) in hole 22-63. Zone 57 NE A can be traced over
a minimum strike length of approximately 50 m and Zone 57 NE B can
be traced over a minimum strike length of approximately 75 m and is
expected to merge into the 57 Target.
Hole 22-63 was extended to cut across the
Montanez, Canta and CSplay Zones. The Montanez Zone appears to
split into several veins at its western extent within the Central
Diorite, with the best intersection within the zone returning
491 g/t Ag.Eq over 0.5 m (295.00 to 295.50 m).
Further downhole, several mineralized veins within the east-west
trending Canta Zone coalesced into an intersection which returned
541 g/t Ag.Eq over 1.66 m (358.34 to 360.00 m)
within a broader interval of 166 g/t Ag.Eq over 10.15 m (352.70 to
362.85 m) (see Figure 2). This intersection is located
approximately 100 m west of the Canta intersections from holes
21-61A & 61W1, which included 388 g/t Ag.Eq over 2.1
m, as previously reported on February 15, 2022. The Canta
Zone can be traced over a minimum strike length of 375 m on
property.
The northeast trending CSplay Zone was
cut deeper downhole in hole 22-63 returning 1095 g/t Ag.Eq over
0.57 m (392.33 to 392.90 m). This CSplay
intersection is located approximately 75 m southwest and 75
vertical m below the high-grade results within holes 21-61 &
61A including 1,064 g/t Ag.Eq over 0.5 m, 1,004 g/t Ag.Eq over 1.22
m and 1,110 g/t Ag.Eq over 0.65 m, as previously reported on
February 15, 2022. The CSplay Zone can be traced over a strike
length of 300 m on the property.
Table 1 – Select Assay
Intervals from Hole 21-62 & 22-63
Zone |
Hole |
From |
To |
Length(m) |
Ag.Eq(1) g/t |
Aug/t |
Ag g/t |
Pb% |
Zn% |
Cu % |
SAN JOSE |
21-62 |
13.95 |
15.70 |
1.75 |
244 |
0.04 |
214 |
0.16 |
0.46 |
0.03 |
|
21-62 |
83.90 |
84.40 |
0.50 |
122 |
0.06 |
107 |
0.14 |
0.08 |
0.03 |
57 NE A |
21-62 |
114.50 |
116.50 |
2.00 |
182 |
1.29 |
72 |
0.04 |
0.07 |
0.02 |
57 NE B |
21-62 |
162.50 |
163.70 |
1.20 |
504 |
0.10 |
305 |
2.05 |
3.01 |
0.09 |
|
21-62 |
171.85 |
172.50 |
0.65 |
187 |
0.12 |
137 |
0.36 |
0.60 |
0.05 |
|
|
|
|
|
|
|
|
|
|
|
SAN JOSE |
22-63 |
15.00 |
15.75 |
0.75 |
178 |
0.05 |
59 |
0.20 |
2.55 |
0.06 |
|
22-63 |
89.93 |
90.73 |
0.80 |
249 |
0.05 |
236 |
0.17 |
0.07 |
0.01 |
57 NE A |
22-63 |
142.50 |
143.20 |
0.70 |
158 |
0.04 |
68 |
0.49 |
1.67 |
0.06 |
|
22-63 |
183.50 |
184.00 |
0.50 |
117 |
0.06 |
79 |
0.41 |
0.33 |
0.07 |
|
22-63 |
193.00 |
194.00 |
1.00 |
134 |
0.15 |
86 |
0.23 |
0.51 |
0.09 |
|
22-63 |
200.40 |
201.50 |
1.10 |
166 |
0.15 |
124 |
0.25 |
0.41 |
0.05 |
|
22-63 |
204.60 |
205.10 |
0.50 |
135 |
0.14 |
72 |
0.26 |
1.00 |
0.04 |
57 NE B |
22-63 |
206.60 |
207.30 |
0.70 |
172 |
0.41 |
84 |
0.56 |
0.85 |
0.05 |
57 NE B |
22-63 |
213.40 |
215.50 |
2.10 |
295 |
0.48 |
142 |
1.26 |
1.61 |
0.12 |
|
22-63 |
227.00 |
227.60 |
0.60 |
211 |
0.11 |
147 |
0.61 |
0.82 |
0.04 |
MIDZONE |
22-63 |
256.40 |
257.00 |
0.60 |
120 |
0.21 |
51 |
0.37 |
0.83 |
0.07 |
MONTANEZ |
22-63 |
292.50 |
293.00 |
0.50 |
124 |
0.81 |
30 |
0.45 |
0.34 |
0.03 |
MONTANEZ |
22-63 |
295.00 |
295.50 |
0.50 |
491 |
0.16 |
284 |
4.42 |
1.44 |
0.04 |
MONTANEZ |
22-63 |
299.50 |
300.00 |
0.50 |
112 |
0.18 |
66 |
0.44 |
0.35 |
0.04 |
MONTANEZ |
22-63 |
312.20 |
312.80 |
0.60 |
142 |
0.16 |
54 |
0.63 |
1.30 |
0.04 |
CANTA |
22-63 |
352.70 |
362.85 |
10.15 |
166 |
0.11 |
76 |
0.63 |
1.42 |
0.05 |
|
including |
358.34 |
360.00 |
1.66 |
541 |
0.15 |
229 |
2.24 |
5.59 |
0.09 |
CANTA |
22-63 |
368.85 |
369.40 |
0.55 |
329 |
0.14 |
128 |
1.77 |
3.14 |
0.11 |
CANTA |
22-63 |
373.14 |
374.14 |
1.00 |
260 |
0.11 |
146 |
1.18 |
1.49 |
0.10 |
CSPLAY |
22-63 |
392.33 |
392.90 |
0.57 |
1095 |
0.28 |
730 |
3.95 |
4.57 |
0.39 |
(1) All results in this release are rounded.
Assays are uncut and undiluted. Widths are core-lengths, not true
widths as a full interpretation of actual orientation of
mineralization is not complete. Intervals of vein mineralization
were chosen based on a 110 g/t Ag.Eq cutoff. Silver equivalent:
Ag.Eq g/t was calculated using 3-year trailing average commodity
prices of $20.60/oz Ag, $0.90/lb Pb, $1.20/lb Zn, $1650/oz Au, and
$3.25/lb Cu. The calculations assume 100% metallurgical recovery
and are indicative of gross in-situ metal value, the Company is
planning to perform additional metallurgical studies later in 2022.
The 57 Target drill intercepts from hole 21-57, which were released
in 2021, were calculated using the current silver equivalent
parameters outlined above.
Sample Analysis and QA/QC
Program
Golden Tag Resources uses a quality
assurance/quality control (QA/QC) program that monitors the chain
of custody of samples and includes the insertion of blanks,
duplicates, and reference standards in each batch of samples sent
for analysis. Drill core is photographed, logged, and cut in half
with one half retained in a secured location for verification
purposes and one half shipped for analysis. Sample preparation
(crushing and pulverizing) is performed at ALS Geochemistry, an
independent ISO 9001:2001 certified laboratory, in Zacatecas,
Mexico and pulps are sent to ALS Geochemistry in Vancouver, Canada
for analyses. The entire sample is crushed to 70% passing -2 mm and
a riffle split of 250 grams is taken and pulverized to better than
85% passing 75 microns. Samples are analyzed for gold using a
standard fire assay with Atomic Absorption Spectrometry (AAS)
(Au-AA23) from a 30-gram pulp. Gold assays greater than 10 g/t are
re-analyzed on a 30-gram pulp by fire assay with a gravimetric
finish (Au-GRA21). Samples are also analyzed using a 35 element
inductively coupled plasma (ICP) method with atomic emission
spectroscopy (AES) on a pulp digested by aqua regia (ME-ICP41).
Overlimit sample values for silver (>100 g/t), lead (>1%),
zinc (>1%), and copper (>1%) are re-assayed using a four-acid
digestion overlimit method with ICP-AES (ME-OG62). For silver
values greater than 1,500 g/t samples are re-assayed using a fire
assay with gravimetric finish on a 30-gram pulp (Ag-GRA21). No
QA/QC issues were noted with the results reported herein.
True widths of drill intercepts have not been
determined. Assays are uncut except where indicated.
Review by Qualified Person and
QA/QC
The scientific and technical information in this
document has been reviewed and approved by Bruce Robbins, P.Geo., a
Qualified Person as defined by National Instrument 43-101.
About Golden Tag Resources
Golden Tag Resources Ltd. is a Toronto based
mineral resource exploration company. The Company holds a 100%
interest, subject to a 2% NSR, in the San Diego Project, in
Durango, Mexico. The San Diego property is among the largest
undeveloped silver assets in Mexico and is located within the
prolific Velardeña Mining District. Velardeña hosts several mines
having produced silver, zinc, lead and gold for over 100 years. For
more information regarding the San Diego property please visit our
website at www.goldentag.ca.For additional information,
please contact:
Greg McKenzie, President & CEOPh:
416-504-2020Email: info@goldentag.cawww.goldentag.ca
Cautionary Statement:Neither
the TSXV nor its Regulation Services Provider (as that term is
defined in the policies of the TSXV) accepts responsibility for the
adequacy or accuracy of this news release. Certain statements in
this news release are forward-looking and involve a number of risks
and uncertainties. Such forward-looking statements are within the
meaning of the phrase ‘forward-looking information’ in the Canadian
Securities Administrators’ National Instrument 51-102 – Continuous
Disclosure Obligations. Forward-looking statements are not
comprised of historical facts. Forward-looking statements include
estimates and statements that describe the Company’s future plans,
objectives or goals, including words to the effect that the Company
or management expects a stated condition or result to occur.
Forward-looking statements may be identified by such terms as
“believes”, “anticipates”, “expects”, “estimates”, “may”, “could”,
“would”, “will”, or “plan”. Since forward-looking statements are
based on assumptions and address future events and conditions, by
their very nature they involve inherent risks and uncertainties.
Although these statements are based on information currently
available to the Company, the Company provides no assurance that
actual results will meet management’s expectations. Risks,
uncertainties and other factors involved with forward-looking
information could cause actual events, results, performance,
prospects and opportunities to differ materially from those
expressed or implied by such forward-looking information.
Forward-looking information in this news release includes, but is
not limited to, statements regarding the effects of the Company’s
exploration program, assay results from the ongoing drill program,
the expansion or discovery of additional high-grade mineralization
or zones, grade improvements at depth. Factors that could cause
actual results to differ materially from such forward-looking
information include, but are not limited to: the ability to predict
and counteract the effects of COVID-19 on the business of the
Company, including but not limited to the effects of COVID-19 on
the price of commodities, capital market conditions, restriction on
labour and international travel and supply chains; failure to
identify mineral resources; failure to convert estimated mineral
resources to reserves; the inability to complete a feasibility
study which recommends a production decision; the preliminary
nature of metallurgical test results; delays in obtaining or
failures to obtain required governmental, environmental or other
project approvals; political risks; changes in equity markets;
uncertainties relating to the availability and costs of financing
needed in the future; the inability of the Company to budget and
manage its liquidity in light of the failure to obtain additional
financing; inflation; changes in exchange rates; fluctuations in
commodity prices; delays in the development of projects; capital,
operating and reclamation costs varying significantly from
estimates and the other risks involved in the mineral exploration
and development industry; and those risks set out in the Company’s
public documents filed on SEDAR. Although the Company believes that
the assumptions and factors used in preparing the forward-looking
information in this news release are reasonable, undue reliance
should not be placed on such information, which only applies as of
the date of this news release, and no assurance can be given that
such events will occur in the disclosed time frames or at all. The
Company disclaims any intention or obligation to update or revise
any forward-looking information, whether as a result of new
information, future events or otherwise, other than as required by
law. No stock exchange, securities commission or other regulatory
authority has approved or disapproved the information contained
herein.
Graphics accompanying this announcement are available
athttps://www.globenewswire.com/NewsRoom/AttachmentNg/bf4b71b5-4eba-4a48-8488-969eef797799
https://www.globenewswire.com/NewsRoom/AttachmentNg/0ce745a2-ec4c-4103-b486-0b3ebf720e0e
Golden Tag Resources (TSXV:GOG)
過去 株価チャート
から 10 2024 まで 11 2024
Golden Tag Resources (TSXV:GOG)
過去 株価チャート
から 11 2023 まで 11 2024