Canada Fluorspar Inc. (TSX VENTURE:CFI)(OTC:CNDFF) ("CFI" or the "Company") is
pleased to announce the seventh set of assay results under the Company's Phase 3
diamond drilling program from two surface trenches and one drill hole on its
Grebes Nest property.


Trench No. 1 was designed to identify the surface expression of the Grebes Nest
Vein as intersected by drill holes GS-13-03 and GS-13-04 (press releases dated
July 11, 2013 and August 20, 2013, respectively). The trench was positioned 35
metres east of drill holes GS-13-03 and GS-13-04 and designed to be constructed
parallel to the azimuth of the two drill holes at 34 degrees. The topography of
the location resulted in the trench being constructed on an azimuth of about 60
degrees. The trench was opened for a distance of 86 metres and exposed a width
of approximately 2 metres of bedrock along the bottom of the trench. Overburden
thicknesses varied from 1.0 to 1.5 metres.


Trench No. 2 is located along the same plane as previously reported drill holes
GS-13-07 (press release dated July 11, 2013), GS-13-09 (press release date July
18, 2013) and GS-13-10 (press release date August 6, 2013) and located 65 metres
east of Trench No. 1. The trench exposed the Grebes Nest Vein in rhyolite having
an average grade of 84.39% CaF2 over 5.52 metres. The trench was opened for a
distance of 42 metres and exposed a 2.5 metre width of bedrock along the bottom
of the trench. The overburden ranged from 1.5 to 2 metres thick with the thicker
interval in the more northern section of the trench.


Drill hole GS-13-22 is located on the same plane as previously reported drill
hole GS-13-21 (press release dated August 20, 2013) which extended the Grebes
Nest Vein to approximately 1.30 km along strike. Drill hole was inclined at -67
degrees and oriented at azimuth 34 degrees.


The new Grebes Nest Vein structure is situated approximately 4 kilometers from
the former Tarefare Mine and less than 6 kilometers from the former Blue Beach
North Mine (see location map below). The two trenches and one drill hole are
located on the western end of the Grebes Nest grid area. Ground geophysical
(magnetometer and EM) survey results indicate that the mineralized structure has
potential to extend for more than 4,000 metres along strike.


To view the first map associated with this press release, please visit the
following link:
http://media3.marketwire.com/docs/CFI_assay_results_sept18_fig01.pdf


Assay Results

Trench No. 1 exposed the Grebes Nest Vein on surface and having an average grade
of 59.26% CaF2 over 6.00 metres. The vein exposure was consistent with the vein
intersection encountered in drill holes GS-13-03 and GS-13-04 below surface. The
vein was hosted in rhyolite.


Trench No. 2 exposed the Grebes Nest Vein on surface and having an average grade
of 84.39% CaF2 over 5.52 metres. The vein exposure was consistent with the vein
intersection encountered in drill holes GS-13-07, GS-13-09 and GS-13-10 below
the trench. The vein was hosted in rhyolite.


Drill hole GS-13-22 tested the down-dip extension of the Grebes Nest Vein on the
same plane as drill hole GS-13-21, a previously reported drill hole (press
release dated August 20, 2013). This hole intersected the Grebes Nest Vein
structure having an average grade of 26.59% CaF2 over 17.12 metres. The vein was
hosted in metasediments.


To view the second map associated with this press release, please visit the
following link:
http://media3.marketwire.com/docs/CFI_assay_results_sept18_fig02.pdf


"The exposure and high-grade of the Grebes Nest Vein on surface, as evidenced in
the two trenches reported and an open cut that was mined 20 years ago and
located just 250-350 metres to the west, gives us reasonable confidence that the
structure hosting the mineralization will be identified on surface along
strike," stated Lindsay Gorrill, President and CEO of the Company.


Geological Interpretation

CFI has received assay results for samples collected from Trenches No.1 and No.
2 and one drill hole, GS-13-22, located along the western part of the Grebes
Nest target area. The two trenches and one drill hole identified mineralization
that has been interpreted to be the Grebes Nest Vein which trends
northwest-southeast and is steeply dipping.


Trench No. 1 exposed the Grebes Nest Vein on surface, similar to that
intersected by drill holes GS-13-03 and GS-13-04. The results from this trench
confirm that the Grebes Nest Vein in this location is interpreted to be
continuous down depth to a vertical distance of approximately 170 metres from
surface. This vein was tested further down depth with drill hole GS-13-27 and
results are pending.


Trench No. 2 exposed the Grebes Nest Vein on surface similar to that intersected
by Trench No. 1 and drill hole GS-13-07 (drilled from south to north) and drill
holes GS-13-09 and GS-13-10 (drilled from the north to south and overlapping at
depth). The results from this trench confirm that the Grebes Nest Vein in this
location is interpreted to be continuous down depth to a vertical distance of
approximately 170 metres from surface.


Drill hole GS-13-22, located on the same plane as drill hole GS-13-21,
intersected the vein about 130 metres vertically from surface and 70 metres
below the drill hole GS-13-21 vein intersection. This vein intersection
contained some carbonate flooding that appears to have been an early phase of
mineralization with the fluorite mineralization formed as part of a later phase
of the fluid deposition in this zone at depth and resulted in a lower than
anticipated average grade compared to the vein intersection directly above it.
However, the structure continues to remain wide down depth and comparable to the
vein intersection above it. This vein was tested further down depth with drill
hole GS-13-23 and results are pending.


Preliminary interpretation of the drill results indicates that the western part
of the target area of the mineralized Grebes Nest structure maintains a
relatively uniform width along strike and within a vertical depth of 175 to 200
metres below surface. The drill intersections also indicate very competent core
and good continuity of mineralized material at depth. CFI notes that most of the
mineralized material is hosted by metasedimentary rocks (interbedded siltstones
and shales, whereas most of the mineralized material at the major fluorspar
veins in the general area - the historic Director, Tarefare, and Blue Beach
North Mines - are hosted by the St. Lawrence Granite ("SLG")). The
metasedimentary rocks in the St. Lawrence area are older than the SLG and early
geological mapping indicates that the Grebes Nest area is underlain by
interlayered pink rhyolite sills, similar in composition to the SLG, which
intruded the metasedimentary rocks. The structure that has been identified by
the drill program is a late phase event that cuts both the metasedimentary rocks
and the sills.


The following table shows the detailed results of the seventh set of assay
results released by CFI on the Grebes Nest Vein noted in Phase 3 of the
Company's 2013 exploration diamond drill program.




                    2013 Diamond-Drill Hole Assay Results                   
                            Grebes Nest - Phase 3                           
                                                                            
                            Canada Fluorspar Inc.                           
                          St. Lawrence Project, NL                          
                                                                            
                                Trench No. 1                                
                                                                            
      Sample No.       From (m)         To (m)     Length (m)         % CaF2
                                                                            
           96059          66.00          67.00           1.00          17.55
           96060          67.00          68.00           1.00          98.76
           96061          68.00          69.00           1.00          88.60
           96062          69.00          70.00           1.00          80.32
           96063          70.00          71.00           1.00          42.52
           96064          71.00          72.00           1.00          27.78
                                                                            
                                                                            
                                Trench No. 2                                
                                                                            
      Sample No.       From (m)         To (m)     Length (m)         % CaF2
                                                                            
           96067          27.13          27.62           0.49          78.80
           96068          27.62          28.62           1.00          87.02
           96069          28.62          29.62           1.00          92.50
           96070          29.62          30.62           1.00          70.67
           96071          30.62          31.62           1.00          77.01
           96072          31.62          32.65           1.03          97.09
                                                                            
                                                                            
                                Hole GS-13-22                               
                                                                            
      Sample No.       From (m)         To (m)     Length (m)         % CaF2
                                                                            
          108506         119.88         120.88           1.00          21.19
          108507         120.88         121.88           1.00          18.03
          108508         121.88         122.88           1.00          23.33
          108509         122.88         123.88           1.00          23.35
          108510         123.88         124.60           0.72          16.33
          108511         124.60         125.50           0.90          30.56
          108512         125.50         126.50           1.00          41.46
          108513         126.50         127.50           1.00          12.09
          108514         127.50         128.50           1.00          17.16
          108515         128.50         129.50           1.00          24.57
          108516         129.50         130.50           1.00          48.12
                                                                            
          108518         130.50         131.17           0.67          39.44
          108519         131.17         131.36           0.19           Void
          108520         131.36         132.00           0.64           7.08
          108521         132.00         133.00           1.00          25.92
          108522         133.00         134.00           1.00          41.80
          108523         134.00         135.00           1.00          25.12
          108524         135.00         136.00           1.00          33.07
          108526         136.00         137.00           1.00          29.89



Assays on these drill holes were carried out at SGS Lakefield Laboratories
("SGS") of Lakefield, Ontario, using the Ion Selective Electrode method to
determine the fluorite content in the low-grade samples and the Dual Calcium
method for samples expected to contain high-grade values (i.e., those with
significant visible fluorspar in the drill core).


Quality Assurance and Quality Control ("QA/QC")

Check assay work by CFI includes insertion of duplicate samples and blanks with
regular batches of mineralized samples of drill core. QA/QC work is also done at
SGS, and results are reviewed and verified by CFI personnel. An independent
geological consultant (Qualified Person) has submitted additional samples
collected from the drill core for analyses.


Phase 1 of the 2013 exploration program was designed to assess the northern
extension of the Director Vein structure. The six drill holes with assay results
to date have shown that the fluorspar mineralization at the Director Vein
extends further along strike and at depth from the old Aluminum Company of
Canada ("Alcan") workings.


Phase 2 of the 2013 exploration program was designed to evaluate the southern
extension of the Director Vein. A trenching program and a geophysical survey
conducted in the area during 2012 identified the structure over a strike length
of 1,000 metres. The current drill program was planned to evaluate the mineral
potential, at depth, of the southern extension of Director Structure and to test
the north extension of the adjacent Hares Ears Vein to the west.


Phase 3 of the 2013 exploration program was designed to evaluate the Grebes Nest
mineral property, namely the Grebes Nest Vein which was identified in the 1940s.
The vein was exposed on the east side of Little Lawn Harbour where the structure
is approximately 1 metre wide and dips to the north at -70 degrees. Prospecting
in the late 1940s traced the structure, through a series of trenches, to the
southeast for a reported distance of 3.2 kilometers. In the late 1940s, a 20
metre deep exploration shaft was sunk on the vein about 500 metres east of the
coast. A drift was driven along the vein for 60 metres and a number of short
cross-cuts were developed. In 1949, five short drill holes were completed
approximately 1 kilometer southeast of the shaft and to the south of the
projected strike of the structure. These drill holes identified a number of
narrow veins in the metasediments. Due to the remote location of the showing and
the adequate reserves at the operating mines owned by Alcan, no additional work
was undertaken.


Initial exploration information regarding the 2013 exploration program at
Director Vein was included in the Company's press releases dated January 16,
2013 and March 12, 2013.


To date, six Phase 1 drill holes have been completed together with 26 additional
drill holes in Phase 2 (19 holes in south extension Director Vein and 7 holes at
Hares Ears Vein) and 35 drill holes and seven trenches in Phase 3 (Grebes Nest
area) of the 2013 exploration program. Assay results for remaining completed
drill holes in Phase 2 and Phase 3 are pending.


Historic exploration data indicates that there are more than 40 mineralized
veins within the CFI property. The three prominent vein structures, however, are
the Director Vein, Blue Beach North Vein, and the Tarefare Vein. Probable
Reserves of the Blue Beach North and Tarefare veins total approximately 5.4
million tonnes at an average grade of 39.8% CaF2. These Mineral Reserves have
been outlined to a vertical depth of 300 metres below the surface, but fluorspar
mineralization extends further at depth. The key assumptions, parameters and
methods used to estimate the Mineral Resources and Mineral Reserves, as well as
other relevant information, including data verification, with respect to the
Blue Beach North and Tarefare veins can be found in a NI 43-101 Technical Report
prepared by the Roscoe Postle Associates Inc. dated March 6, 2013, which has
been filed by the Company on SEDAR (www.sedar.com).


About the Company

The Company is a specialty mineral resource company engaged in the development
of fluorspar deposits located in St. Lawrence, Newfoundland, Canada, and is
proposing, through Newspar, its 50/50 joint venture with Arkema, to reactivate
the existing Blue Beach North and Tarefare underground fluorspar mines, by
expanding the existing mill and constructing a new, environmentally-sound
Tailings Management Facility.


Mr. James H. Reeves, Senior Geologist with CFI, who is a Qualified Person as
defined in National Instrument 43-101 - Standards of Disclosure for Mineral
Properties, reviewed and approved the technical content of this news release.
The information regarding historic production has not been verified by the
Company and is provided for reference only.


Material results of the Company's 2012 and 2013 exploration program have been
disclosed in the Company's press releases dated March 1, 13 and 30, 2012, April
16 and 24, 2012 and January 16, 2013, March 12, 2013, April 24, 2013, May 8,
2013, June 5, 2013, July 2, 2013, and July 11, 2013 including assay results from
thirty (30) previous drill holes under the Company's diamond drilling program
which were disclosed in the Company's press releases dated March 12, 2013, April
24, 2013, May 8, 2013, June 5, 2013, July 2, 2013, July 11, 2013, July 18, 2013,
August 6, 2013, August 12, 2013, August 20, 2013 and August 29, 2013.


For more information please see: www.canadafluorspar.com.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term
is defined in the policies of the TSX Venture Exchange) accepts responsibility
for the adequacy or accuracy of this release.


Cautionary Note and Forward-Looking Statements

This press release contains forward-looking statements which include, but are
not limited to: resource estimates, proposed mining techniques required to
construct and produce at expected levels, anticipated timing for completion of
metallurgical testing, the commencement of the drilling program, current
development and operating objectives and outlook, expectations, opinions,
forecasts, projections, guidance or other statements that are not statements of
fact. Although the Company believes that the expectations reflected in such
forward-looking statements are reasonable, it cannot give any assurance that
such expectations will prove to be correct. Results of the Company may be
affected by a variety of variables and risks associated with mining development
including: loss of market, volatility of commodity prices, currency
fluctuations, imprecision of reserve estimates, environmental risks, competition
from other producers, ability to access sufficient debt and equity capital from
internal and external sources, ability to generate sufficient cash flow to meet
its current and future obligations, regulatory approvals affecting construction
and mining operations. Such forward-looking statements are also based on a
number of assumptions which may prove to be incorrect, including, but not
limited to, assumptions about the following: the availability of financing for
exploration and development activities, the estimated timeline for the
development of the project at St. Lawrence, the supply and demand for, and the
level and volatility of the price of fluorspar, the assumptions on which
resource estimates are based, the receipt of necessary permit, market
competition, ongoing relations with employees and impacted communities, and
general business and economic conditions. Should one or more of the risks or
uncertainties involved in forward-looking statements materialize, or should the
assumptions prove incorrect, actual results may vary materially from those
anticipated, believed, estimated or expected. Accordingly, readers should not
place undue reliance on forward-looking statements.


Forward-looking statements are qualified entirely by this cautionary statement
and are given only as at the date of this press release. The Company disclaims
any obligation to update or revise any forward looking statements, whether as a
result of new information, future events or otherwise, except as required by
law.


FOR FURTHER INFORMATION PLEASE CONTACT: 
Canada Fluorspar Inc.
Lindsay Gorrill
President and CEO
1-800-823-8095
lgorrill@canadafluorspar.com
www.canadafluorspar.com

Califfi Capital (TSXV:CFI)
過去 株価チャート
から 5 2024 まで 6 2024 Califfi Capitalのチャートをもっと見るにはこちらをクリック
Califfi Capital (TSXV:CFI)
過去 株価チャート
から 6 2023 まで 6 2024 Califfi Capitalのチャートをもっと見るにはこちらをクリック