Tinka Resources Limited (TK)

Tinka Announces Appointment of Alejandro Hermoza as DirectorJuly 9, 2026 6:30 AM
NewsfileVancouver, British Columbia--(Newsfile Corp. - July 9, 2026) - Tinka Resources Limited (TSXV: TK) (OTCQX: TKRFF) ("Tinka" or the "Company") is pleased to announce the appointment of Mr. Alejandro Hermoza as a non-executive director of the Company. Mr. Hermoza joins the Board as the nominee of Compañía de Minas Buenaventura ("Buenaventura"), one of Tinka's largest shareholders, replacing Mr. Raul Benavides. The Company extends its sincere appreciation to Mr. Benavides for his dedicated service and important contributions to Tinka over many years.Mr. Hermoza brings more than 20 years of leadership experience in sustainability, environmental and social affairs, community relations, and corporate governance. He served as Vice President of Sustainability at Buenaventura from 2011 until his retirement in May 2026, following a 23-year career with Buenaventura.Brandon Macdonald, Chairman of Tinka, commented: "We are delighted to welcome Alex Hermoza to the Tinka Board. His extensive experience in sustainability, community relations, and environmental and social management will be invaluable as we advance the Ayawilca and Colquipucro projects toward development.We would also like to sincerely thank Raul Benavides for his many years of support and service to Tinka. Raul has been a valued director, mentor to management, and strong advocate for the Company. On behalf of the Board, I thank him for his significant contribution and wish him all the best in his retirement."Mr. Hermoza joined Buenaventura in 2003, serving in progressively senior roles including Human Resources Manager, Community Relations Manager, and Vice President of Sustainability. In his executive capacity, he also served on the Board of Sociedad Minera El Brocal and as an alternate member of the Executive Committee of Minera Yanacocha. He currently serves on the Board of UDEA (Universidad para el Desarrollo Andino).Mr. Hermoza holds bachelor's and master's degrees in Mechanical Engineering from the University of Maryland, College Park, an MBA from Universidad Peruana de Ciencias Aplicadas (UPC), Peru, and completed the Advanced Management Program at Harvard Business School.The Company also announces that its Board of Directors (the "Board") has authorized and approved the grant of stock options (the "Options") to purchase up to an aggregate of 300,000 shares at an exercise price of C$0.40 per share to Mr. Hermoza. The Options are subject to vesting provisions as determined by the Board and are exercisable on or before June 30, 2031.On behalf of the Board,"Graham Carman"
Dr. Graham Carman, President & CEO Further Information:
www.tinkaresources.com
Tim McNulty 1.604.290.8100
info@tinkaresources.com Stay up to date by subscribing for news alerts at Contact Tinka and by following Tinka on X, LinkedIn and Facebook.About Tinka Resources Limited
Tinka is an exploration and development company focused on base and precious metals projects in Peru. The Company's flagship property is the Ayawilca project which has substantial mineral resources of zinc and silver, a separate tin resource, and the near-surface Colquipucro silver deposit. The nearby Silvia copper-gold project is a skarn and porphyry target. The Company filed a NI 43-101 technical report on an updated PEA for the Ayawilca Project on April 15, 2024 (link to NI 43-101 report here). Dr. Graham Carman, Tinka's President and CEO, has reviewed, verified and approved the technical contents of this release. Dr. Carman is a Fellow of the Australasian Institute of Mining and Metallurgy, and is a Qualified Person as defined by National Instrument 43-101. Forward-Looking Statements: This press release may contain forward-looking statements including those describing the Company's future plans and the expectations of management that a stated result or condition will occur. Any statement addressing future events or conditions necessarily involves inherent risk and uncertainty. Actual results can differ materially from those anticipated by management at the time of writing due to many factors, the majority of which are beyond the control of the Company and its management. In particular, this news release contains forward-looking statements pertaining, directly or indirectly, to the following: regulatory conditions and the Company's ability to receive permits and regulatory approvals, mineral resource estimates and the assumptions underlying such estimates, and economic factors, business and operations strategies. These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements expressed or implied by such forward-looking statements to be materially different from expectations. Although management of the Company has attempted to identify important factors that could cause actual results to differ, there is no assurance that these forward-looking statements will prove accurate or that actual results will not vary materially from such statements. These statements speak only as of the date of this release, and the Company undertakes no obligation to publicly update or revise any forward-looking statements except as expressly required by applicable securities laws.Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/304520 Original: Tinka Announces Appointment of Alejandro Hermoza as Director

Tinka Highlights Exploration Progress at Ayawilca and Silvia ProjectsMay 20, 2026 9:30 AM
NewsfileVancouver, British Columbia--(Newsfile Corp. - May 20, 2026) - Tinka Resources Limited (TSXV: TK) (OTCQX: TKRFF) ("Tinka" or the "Company") is pleased to provide an exploration update on exploration at the Ayawilca zinc-silver-tin and Silvia copper-gold projects in central Peru. Silvia Copper-Gold Project:A magnetotellurics (MT) ground geophysical survey will commence by the end of May 2026 covering a 4 km2 area targeting several copper-gold skarn and porphyry targets at the Silvia NW area including Area A (4 holes drilled Q4 2025) and Areas B and C (not previously drilled).The MT survey is designed to highlight deep conductive zones caused by sulphides associated with copper-gold skarn and/or porphyry mineralization. The survey is expected to be completed early July.Initial drill holes at Silvia NW in Q4 2025 intersected encouraging skarn-hosted copper-gold mineralization which included 15.1 metres @, and 23.2 metres @Not available for adoption (see news release Feb 26, 2026). Ayawilca Zinc-Silver Project:Tinka has completed a revised interpretation of the geological and structural controls within the main zones at Ayawilca. Several high-grade silver veins have been interpreted from drill hole intercepts and incorporated into the 3D geological model, veins that were not included in the 2024 mineral resource estimation. The Company is now advancing a detailed prioritization of drill targets for the upcoming ~5,000 metre drill program at Ayawilca, to focus on high-grade areas of silver and zinc including resource conversion and extension. The Colquipucro silver deposit, 2 km from Ayawilca, is a potential open pit silver resource. Colquipucro, which was last reviewed in 2016, is currently undergoing a detailed internal re-evaluation including consideration for inclusion in future resource updates and economic studies. Dr. Graham Carman, President and CEO of Tinka, stated: "We look forward to the MT geophysical survey commencing at our Silvia project this month. The MT survey will cover multiple copper-gold targets over several square kilometres of highly prospective geology. We have the flexibility of being able to follow up with drilling at short notice if high priority geophysical targets eventuate, as the drilling rig used in the previous campaign remains on site."At Ayawilca, we continue to make good progress in our discussions with local communities to extend our social agreement for an additional three years. Tinka has been working with these same communities for over 10 years, with signed agreements renewed multiple times. Our relationship with the communities remains strong. We remain on track to commence drilling at Ayawilca in Q3 2026."Recent desktop remodelling of the Ayawilca deposit has significantly improved the understanding of the structural controls to the high-grade mineralization. We have incorporated six silver-rich veins at West Ayawilca into the 3D geological model, and been able to follow-up and sample some of these high-grade silver structures at surface. The Silver Zone veins have not been significantly drilled and remain a high priority exploration target. Meanwhile, the Colquipucro area is a compelling silver resource and we are continuing to evaluate the opportunity in the context of vastly improved silver prices." Silvia UpdateThe Company has signed a contract with a geophysical company to carry out a magnetotellurics (MT) geophysical survey covering an area of ~4 km2 at the Silvia NW copper-gold target in central Peru commencing May 2026. The MT survey will cover several copper-gold skarn and porphyry targets including Area A (4 holes drilled Q4 2025) and Areas B and C (not previously drilled). The Silvia project is located 100 km south and along trend of the giant Antamina copper mine. This geophysical survey is following up on initial drill program comprising four holes for 1,400 metres at Silvia NW Area A during Q4 2025 – see news release. The MT survey is designed to highlight deep conductive or resistive zones that could reflect buried sulphides associated with copper-gold skarn and/or porphyry mineralization at multiple targets. The drill rig remains on standby at the project following the Q4 2025 drill program, and could be used to follow up on high-priority geophysical targets that come out of the MT survey. Results of the MT geophysics are expected by the end of June 2026. Ayawilca UpdateThe Company is making excellent progress in its discussions with local communities to extend our social agreement for the Ayawilca Project for an additional three years. The Company expects to have signed agreements in place in Q3 2026. Subject to the execution of these agreements, the Company will commence a ~5,000-metre drill program shortly thereafter. All drill permits are in place for this drilling program and subsequent programs covering at least 2 further years. Updated Geological and Structural ModelThe Company has now completed a revised 3D interpretation of the structural controls and key geological features of the main mineralized zones at Ayawilca. We are advancing a detailed prioritization of drill targets for the upcoming drilling program, focusing on extending the highest-grade silver-zinc zones and aiming to increase high-grade resources in areas of high priority but with lower levels of confidence. This drilling focus is likely to include some of the Silver Zone veins at West Ayawilca which were not incorporated in the current mineral resource (see below). ColquipucroThe Colquipucro silver deposit, located less than 2 km from the Ayawilca Project, is being reassessed in light of substantially higher current silver prices. The 2016 mineral resource estimate was based on a silver price assumption of US$24/oz, compared to the current spot silver price, which is more than three times higher.The Colquipucro Mineral Resource Estimate (as reported in the 2024 PEA technical report, unchanged since May 2016) comprises indicated resources of 7.4 Mt grading 60 g/t Ag containing 14.3 Moz silver, and inferred resources of 8.5 Mt grading 48 g/t Ag containing 13.2 Moz silver using a cut-off grade of 15 g/t Ag. The resource is constrained within a preliminary pit shell. Colquipucro was not included in the economic analysis section of the 2024 PEA.Colquipucro is currently undergoing a detailed internal re-evaluation, including consideration for inclusion in future resource updates and economic studies.Silver Zone veinsRecent 3D remodelling and reinterpretation of the geology and structural framework at the Ayawilca Project (Figure 1) has identified six steeply dipping silver-rich veins at West Ayawilca that have been incorporated into the 3D geological model of the deposit for the first time. These "Silver Zone" veins, highlighted in Figure 2, contain high-grades of silver with associated lead and zinc mineralization with multiple intercepts in past drill holes. The veins are more poorly developed in siltstone, which typically occurs close to surface. The discovery of silver-rich veins was made at West Ayawilca in 2018, known as the "Vetas" area (news release of Oct 15, 2018 available on sedarplus), and it was noted that silver grades and vein thicknesses increase with depth especially when hosted in the lower sandstone. The Silver Zone veins are interpreted to have relatively modest true width (ranging from < 1m to 10 m) and therefore, tonnage potential is limited compared to the main Zinc Zone sulphide mineralization based on a qualitative geological interpretation. However, the veins represent attractive exploration targets based on their high-grade silver grades and relative shallow depth. Table 1 highlights some of the previous drill hole intercepts in the Silver Zone veins at West Ayawilca and original news release dates. Table 1. Selected Silver Vein drill hole intercepts from West Ayawilca – downhole intervals onlyDrill holeFrom mTo mDownhole
Interval m *Ag g/tPb %Zn %Host rockTinka news release date***A15-054166.0173.07.01371.96.6SandstoneJanuary 20, 2016A17-058103.5107.74.23294.220.2SiltstoneMay 3, 2017and133.25134.351.15003.230.3SandstoneMay 3, 2017A18-11449.852.02.22895.29.3SiltstoneNot previously reported**and151.7152.81.11,16428.824.4SandstoneNot previously reported**A18-11794.0101.87.81835.18.1SiltstoneJune 26, 2018A18-131264.0274.010.06651.91.4SandstoneOctober 15, 2018 * True thicknesses are estimated to between 50% and 70% of the downhole thicknesses. This assumption is based on currently available geological information and interpretation thereof, while more drilling is required to confirm the overall geometry and average grade of the veins.
** Some drill hole data in this table was not previously reported. Refer to notes on sampling and assaying below
*** pre-2019 Tinka news releases are available on sedarplus.caSilver Zone veins occur both above, and adjacent to, the Zinc Zone massive sulphide resources which are typically hosted within the underlying limestone units at Ayawilca (see Figure 2). The Silver Zone mineralization comprises steeply dipping vein systems (dipping both north and south) developed predominantly within the sandstone units which overlie the limestone. The near-surface siltstones typically host narrow vein structures typically < 1 metre in width. Some of these veins were historically mined on an artisanal scale. The veins are characterized by abundant iron-manganese carbonates with low to moderate sulphide content (5-25 vol.%) dominated by sphalerite, galena, pyrite and silver sulphosalts.Recent channel sampling results across vein outcrops at West Ayawilca include: 1.0 m grading 618 g/t Ag, 0.9% Pb and 4.7% Zn; 0.4 m grading 1,431 g/t Ag, 9.4% Pb and 5.3% Zn; and 0.2 m grading 996 g/t Ag, 10.9% Pb and 15.0% Zn (see Figure 2 for the location of these channels on cross section). Only one of the Silver Zone veins was included in the 2024 Mineral Resource Estimate at South Ayawilca (see Figure 1). Drilling completed to date has not fully tested the extent of the vein system, and the Company believes there is considerable potential for significant extensions. More drilling will be required to upgrade some of these veins to resource status.Issuance of Stock Options The Company has granted 250,000 stock options to an independent consultant. The options are exercisable at a price of C$0.46 per share, have a one-year term and vest over a period of up to four months. The grant is subject to the terms of the Company's stock option plan.Notes on sampling and assaying
All historic drill holes are diamond HQ or NQ size core holes with recoveries generally above 80% and often close to 100%. The drill core is marked up, logged, and photographed on site. The cores are cut in half at the Company's core storage facility, with half-cores stored as a future reference. All historic drill core is stored and available. All drill samples were sent to SGS laboratories in Lima for assay in batches. Standards and blanks with known values were inserted into each batch prior to departure from Tinka's core storage facilities for QA/QC purposes. At the laboratory samples are dried, crushed to 100% passing 2mm, then 500 grams pulverized for multi-element analysis by ICP using multi-acid digestion. Samples assaying over 1% zinc, lead, or copper and over 100 g/t silver are re-assayed using precise ore-grade AAS techniques. The drill core in table 1 is not orientated.
Channel samples at West Ayawilca were collected with hammer and chisel across outcropping veins. Samples were bagged and sent to SGS Lima for assay using similar laboratory methods to the drill samples. No standards or blanks were inserted by Tinka.Figure 1. Map of Ayawilca highlighting key zinc, silver and tin exploration targets and main faults on RTP magneticsTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2197/298117_ac036d0c84e1d8dd_007full.jpgFigure 2. Cross Section AB of remodeled Silver Zone veins (green colour) at West Ayawilca, viewing to the westTo view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2197/298117_ac036d0c84e1d8dd_008full.jpgOn behalf of the Board,"Graham Carman"
Dr. Graham Carman, President & CEO Further Information:
www.tinkaresources.com
Tim McNulty 1.604.290.8100
info@tinkaresources.com Stay up to date by subscribing for news alerts at Contact Tinka and by following Tinka on X, LinkedIn and Facebook.   About Tinka Resources Limited
Tinka is an exploration and development company focused on base and precious metals projects in Peru. The Company's flagship property is the Ayawilca project which has substantial mineral resources of zinc and silver, a separate tin resource, and the near-surface Colquipucro silver deposit. The nearby Silvia copper-gold project is a skarn and porphyry target. The Company filed a NI 43-101 technical report1 on an updated PEA for the Ayawilca Project on April 15, 2024 (link to NI 43-101 report here). Dr. Graham Carman, Tinka's President and CEO has verified, reviewed and approved the technical contents of this release. Dr. Carman is a Fellow of the Australasian Institute of Mining and Metallurgy, and is a Qualified Person as defined by National Instrument 43-101. 1. This NI 43-101 Technical Report was prepared by independent consulting firm SRK Consulting (UK), as principal consultants, with contributions from other independent Qualified Persons (as the term is defined in NI 43-101) with specific subject matter expertise including, SLR Consulting (Canada) Ltd. for mineral resource estimation, Transmin Metallurgical Consultants, UK, for processing, metallurgical and recovery inputs, MineFill Services, Seattle, for mine backfill inputs, and Envis Peru S.A.C. (Envis) for processing and costs for surface tailings storage. The Technical Report may be found under the Company's profile on SEDAR+ at www.sedarplus.ca and on the Company's website at www.tinkaresources.com.Forward-Looking Statements: Certain information in this news release contains forward-looking statements and forward-looking information within the meaning of applicable securities laws (collectively "forward-looking statements"). All statements, other than statements of historical fact, are forward-looking statements. Forward-looking statements are based on the beliefs and expectations of Tinka as well as assumptions made by and information currently available to Tinka's management. Such statements reflect the current risks, uncertainties and assumptions related to certain factors including, without limitations: timing of planned work programs and results varying from expectations; delay in obtaining results; changes in equity markets; uncertainties relating to the availability and costs of financing needed in the future; equipment failure; unexpected geological conditions; imprecision in resource estimates or metal recoveries; success of future development initiatives; competition and operating performance; environmental and safety risks; the preliminary nature of the Ayawilca Project PEA and the Company's ability to realize the results of the Ayawilca Project PEA; the political environment in which the Company operates continuing to support the development and operation of mining projects; risks related to negative publicity with respect to the Company or the mining industry in general; delays in obtaining or failure to obtain necessary permits and approvals from local authorities; community agreements and relations; and, other development and operating risks. Should any one or more of these risks or uncertainties materialize, or should any underlying assumptions prove incorrect, actual results may vary materially from those described herein. Although Tinka believes that assumptions inherent in the forward-looking statements are reasonable, forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein. Except as may be required by applicable securities laws, Tinka disclaims any intent or obligation to update any forward-looking statement.Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/298117 Original: Tinka Highlights Exploration Progress at Ayawilca and Silvia Projects

Tinka Resources Limited (OTCQX: TKRFF | TSXV: TK) at Precious Metals & Critical Minerals VIC 2026



Weekly Chart
https://schrts.co/nWRkAMeD

https://schrts.co/TYIJAIud

Tinka Resources Limited Unaware of Any Material ChangeApril 22, 2026 4:33 PM
NewsfileVancouver, British Columbia--(Newsfile Corp. - April 22, 2026) - Tinka Resources Limited (TSXV: TK) (OTCQX: TKRFF) ("Tinka" or the "Company") at the request of CIRO, Tinka wishes to confirm that the Company's management is unaware of any material change in the Company's operations that would account for the recent increase in market activity.On behalf of the Board,"Graham Carman"
Dr. Graham Carman, President & CEO Further Information:
www.tinkaresources.com
Tim McNulty 1.604.290.8100
info@tinkaresources.comStay up to date by subscribing for news alerts at Contact Tinka and by following Tinka on X, LinkedIn and Facebook. About Tinka Resources Limited
Tinka is an exploration and development company focused on base and precious metals projects in Peru. The Company's flagship property is the Ayawilca zinc-silver-tin project which has substantial mineral resources of zinc-silver sulphides, the Colquipucro silver deposit and a separate tin resource. The Company filed a NI 43-101 technical report on an updated PEA for the Ayawilca Project on April 15, 2024 (link to NI 43-101 report here). Dr. Graham Carman, Tinka's President and CEO, has reviewed, verified and approved the technical contents of this release. Dr. Carman is a Fellow of the Australasian Institute of Mining and Metallurgy, and is a Qualified Person as defined by National Instrument 43-101. Forward-Looking Statements: This press release may contain forward-looking statements including those describing the Company's future plans and the expectations of management that a stated result or condition will occur. Any statement addressing future events or conditions necessarily involves inherent risk and uncertainty. Actual results can differ materially from those anticipated by management at the time of writing due to many factors, the majority of which are beyond the control of the Company and its management. In particular, this news release contains forward-looking statements pertaining, directly or indirectly, to the following: regulatory conditions and the Company's ability to receive permits and regulatory approvals, mineral resource estimates and the assumptions underlying such estimates, and economic factors, business and operations strategies. These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements expressed or implied by such forward-looking statements to be materially different from expectations. Although management of the Company has attempted to identify important factors that could cause actual results to differ, there is no assurance that these forward-looking statements will prove accurate or that actual results will not vary materially from such statements. These statements speak only as of the date of this release, and the Company undertakes no obligation to publicly update or revise any forward-looking statements except as expressly required by applicable securities laws.Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/293870
Original: Tinka Resources Limited Unaware of Any Material Change

Tinka Announces Upgrade to OTCQXMarch 12, 2026 11:33 AM
NewsfileVancouver, British Columbia--(Newsfile Corp. - March 12, 2026) - Tinka Resources Limited (TSXV: TK) (OTCQX: TKRFF) ("Tinka" or the "Company") is pleased to announce that it has qualified to upgrade from the OTCQB® Venture Market to the OTCQX® Best Market (the "OTCQX Market" or "OTCQX"). The Company will commence trading today on OTCQX under the symbol "TKRFF". The OTCQX Best Market is the highest market of OTC Markets, and trading on OTCQX will enhance the visibility and accessibility of the Company to U.S. investors. To qualify for OTCQX, companies must meet high financial reporting standards, follow best practices with respect to corporate governance, and demonstrate compliance with applicable securities laws. U.S. investors can find current financial disclosure and Real-Time Level 2 quotes for the Company on www.otcmarkets.com.Executive Chairman of Tinka, Mr. Brandon Macdonald, stated "Tinka's graduation from OTCQB to OTCQX is part of a continued evolution and reflects the quality of our Company and projects. With access to a wider investor audience on OTCQX we anticipate improved visibility and liquidity, and a broader base of both U.S. and global investors."On behalf of the Board,"Graham Carman"
Dr. Graham Carman, President & CEO Further Information:
www.tinkaresources.com
Tim McNulty 1.604.290.8100
info@tinkaresources.comStay up to date by subscribing for news alerts at Contact Tinka and by following Tinka on X, LinkedIn and Facebook.  About Tinka Resources Limited Tinka is an exploration and development company focused on base and precious metals projects in Peru. The Company's flagship property is the Ayawilca zinc-silver-tin project which has substantial mineral resources of zinc-silver sulphides, the Colquipucro silver deposit and a separate tin resource. The Company filed a NI 43-101 technical report on an updated PEA for the Ayawilca Project on April 15, 2024 (link to NI 43-101 report here). Dr. Graham Carman, Tinka's President and CEO, has reviewed, verified and approved the technical contents of this release. Dr. Carman is a Fellow of the Australasian Institute of Mining and Metallurgy, and is a Qualified Person as defined by National Instrument 43-101. About OTC Markets Group Inc.OTC Markets Group Inc. (OTCQX: OTCM) operates regulated markets for trading 12,000 U.S. and international securities. Our data-driven disclosure standards form the foundation of our public markets: OTCQX® Best Market, OTCQB® Venture Market, OTCID™ Basic Market and Pink Limited™ Market. Our OTC Link® Alternative Trading Systems (ATSs) provide critical market infrastructure that broker-dealers rely on to facilitate trading. Our innovative model offers companies more efficient access to the U.S. financial markets.OTC Link ATS, OTC Link ECN, OTC Link NQB, and MOON ATS™ are each SEC regulated ATS, operated by OTC Link LLC, a FINRA and SEC registered broker-dealer, member SIPC. To learn more about how we create better informed and more efficient markets, visit www.otcmarkets.com.Forward Looking Statements: This press release may contain forward-looking statements including those describing the Company's future plans and the expectations of management that a stated result or condition will occur. Any statement addressing future events or conditions necessarily involves inherent risk and uncertainty. Actual results can differ materially from those anticipated by management at the time of writing due to many factors, the majority of which are beyond the control of the Company and its management. In particular, this news release contains forward-looking statements pertaining, directly or indirectly, to the following: regulatory conditions and the Company's ability to receive permits and regulatory approvals, mineral resource estimates and the assumptions underlying such estimates, and economic factors, business and operations strategies. These forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements expressed or implied by such forward-looking statements to be materially different from expectations. Although management of the Company has attempted to identify important factors that could cause actual results to differ, there is no assurance that these forward-looking statements will prove accurate or that actual results will not vary materially from such statements. These statements speak only as of the date of this release, and the Company undertakes no obligation to publicly update or revise any forward-looking statements except as expressly required by applicable securities laws.Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/288272
Original: Tinka Announces Upgrade to OTCQX

TKRFF one for 5 reverse split:

https://otce.finra.org/otce/dailyList?viewType=Symbol%2FName%20Changes

TINKA PROVIDES AYAWILCA PROJECT UPDATE

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCQB: TKRFF) is pleased to provide an update on the Company’s exploration and development activities at its 100%-owned Ayawilca project in central Peru.

December 14th 2023

Key Highlights for 2023

11,000 metre in-fill drill program has enhanced confidence in the Zinc and Silver mineral resources:
Hole A23-216: 98 metres at 8.8% zinc including 36 metres at 19.0% zinc (news release June 8, 2023).
Hole A23-217: 71.9 metres at 5.5% zinc & 8 g/t silver including 45.8 metres at 6.4% zinc & 10 g/t silver and 4.85 metres at 15.2% zinc & 23 g/t silver (news release June 8, 2023).
Hole A23-213: 30.4 metres at 6.0% zinc including 1.2 metres at 37.2% zinc and 30.5 metres at 5.1% zinc (news release June 8, 2023).
A23-212: 145.2 metres at 10.9% zinc including 29.3 metres at 20.2% zinc, 10.6 metres at 14.9% zinc, 9.8 metres at 15.1% zinc and 25.8 metres at 13.1% zinc (news release March 6, 2023).
A22-208: 4.6 metres at 32.4% zinc, 9.9 metres at 9.7% zinc and 71.2 metres at 8.8% zinc including 37.7 metres at 12.8% zinc (news release March 6, 2023).
A23-220 (Silver Zone): 29.5 metres at 182 g/t silver, 2.4% zinc & 0.8% lead including 7.1 metres at 604 g/t silver, 2.7% zinc & 1.6% lead (news release May 2, 2023).
This successful drill program has resulted in the decision by the Company to update the Preliminary Economic Assessment (PEA) for the Ayawilca project including an update of the mineral resource estimations; the PEA is expected to be completed by March 2024.
Improved metallurgy of the Tin Zone supported by test work, with ongoing work improving the silver recovery of the Silver Zone.
Project moving forward towards decision to undertake a pre-feasibility study.
The Company is fully funded to carry out its current work plans.

Dr. Graham Carman, Tinka’s President and CEO, stated: “To continue the advancement of our flagship Ayawilca project, we believe it is a necessary next step to update the PEA and technical report on the project following the successful recent drilling campaign. An updated PEA will include a processing scenario for both the Ayawilca Zinc Zone and the Tin Zone and incorporate an update to the mineral resources.”

“We are very encouraged by the improvement in the tin recovery and concentrate grades following metallurgical test work on the Tin Zone mineralization. In addition, metallurgical test work of the Silver Zone mineralization is in progress. These final test work results, when available, will provide support for key assumptions on silver recoveries in the PEA.”


Read more at:
https://mailchi.mp/56314d1915ee/tinka-lists-on-otcqb-venture-market-under-ticker-symbol-tkrff-9555656?e=e6d14b37f4

Tinka Drills 98 Meters At 8.8% Zinc Including 36 Meters At 19.0% Zinc At Ayawilca And Provides Exploration Update (TSXV:TK)(BVL:TK)(OTCQB:TKRFF)
https://tinkaresources.com/news-releases/tinka-drills-98-metres-at-8.8-zinc-including-36-metres-at-19.0-zinc-at-ayawilca-and-provides-exploration-update/

TINKA DRILLS 7.1 METRES AT 604 G/T SILVER IN HIGH-GRADE SILVER ZONE AT SOUTH AYAWILCA (TSXV&BVL:TK, OTCQB:TKRFF)
https://tinkaresources.com/news-releases/tinka-drills-7.1-metres-at-604-g-t-silver-in-high-grade-silver-zone-at-south-ayawilca/

3 Undervalued Small-cap Stocks With Impressive Upside Potential $E.TO $JOR $TK

https://10xalerts.com/3-undervalued-small-cap-stocks-with-impressive-upside-potential/

CEO Clips - Tinka Resources: A Mining Company with Significant Zinc Resources in Peru (TSXV: TK, OTCQB: TKRFF)

https://www.b-tv.com/post/tsxv-tk-ceo-clips-tinka-resources-a-mining-company-with-significant-zinc-resources-in-peru-60s?fbclid=IwAR1zPHluG3G1kJpqPm0Kc0WeUFKsi2oQAGfzHauulGmgjVN7BB3BfcaCnLw

Tinka Resources Production Moving Forward at Ayawilca (TSXV:TK) (OTCMKTS:TKRFF)

https://10xalerts.com/tinka-resources-production-moving-forward-at-ayawilca-tsxvtk-otcmktstkrff/

LIVE From PDAC 2023: The Tinka Resources Story in Under 10 Minutes (TSXV:TK)

home run in 2023

TINKA DISCOVERS HIGH GRADE TIN MINERALIZATION AT SOUTH AYAWILCA

April 14, 2021

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCQB: TKRFF) is pleased to announce tin assays from the 7,600 metre, 21-hole, 2020-2021 drill program recently completed at the Ayawilca project in central Peru.

While the focus of the 2020-2021 drill program was on resource definition of zinc-silver mineralization, significant tin mineralization was also intercepted in several of the drill holes. Of note, Tinka has discovered a new zone of high-grade tin mineralization at South Ayawilca, immediately adjacent to the highest grade zinc resource. This is the first time that tin mineralization of such high grade has been discovered at South Ayawilca. Tin mineralization was intersected in eight adjacent drill holes, including seven of the recent holes, in zones that typically contain very minor or no zinc mineralization. The tin mineralization is believed to be hosted by multiple, flat-dipping lenses with each lens up to 12 metres in thickness and with horizontal dimensions of approximately 200 metres, remaining open to the north. Tin mineralization in hole A21-187 (12 metres grading 3.1% tin) occurs 40 metres above zinc mineralization in the same hole (4.1 metres grading 17.7% zinc) (link to news release). Tin occurs as cassiterite (SnO2), the most common ore-forming mineral of tin. Refer to maps in Figures 1 and 2 for the location of the tin mineralization.

Tin is traditionally used as a solder and for tin plating of other metals but it also is a key metal in new applications such as autonomous and electric vehicles, renewable energy, energy storage, and advanced computing. Tin has the highest value of the major base metals and is currently trading at around US$27,000 per tonne or 3 times the value of copper and 9 times the value of zinc (source).


Read more & view tables & graphics at:
https://mailchi.mp/c1267b9f7495/tinka-discovers-high-grade-tin-mineralization-at-south-ayawilca?e=e6d14b37f4

TINKA DRILLS 9 METRES GRADING 20% ZINC AT AYAWILCA

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce new assay results for six diamond drill holes from the Company’s 2020-2021 resource expansion and infill drill program at the Ayawilca project in Peru. Four holes are located at the Camp area (A20-180, 181, 182 & 183) and two holes at the South area (A21-185 & 187).

The two holes at South Ayawilca intersected high grade zinc-silver mineralization associated with massive sulphide mineralization over substantial widths and are expected to expand the indicated mineral resources at the project. Tinka has drilled approximately 7,600 metres in 21 completed holes during the 2020-2021 program. The Company is compiling the drill data and completing geological interpretations in preparation for an updated mineral resource and Preliminary Economic Assessment (PEA) scheduled for the middle of 2021. Assay results for the final four drill holes are still pending.

Drill Highlights:
South Area:
Hole A20-187b

4.1 metres @ 17.7% zinc & 34 g/t silver from 302.9 metres depth; and
40.0 metres @ 8.8% zinc & 12 g/t silver from 324.0 metres depth, including
9.1 metres @ 20.1% zinc & 23 g/t silver from 353.3 metres depth.

Hole A20-185

1.7 metres @ 23.4% zinc & 97 g/t silver from 133.3 metres depth; and
5.0 metres @ 6.9% zinc & 13 g/t silver from 289.6 metres depth; and
23.6 metres @ 9.4% zinc & 10 g/t silver from 304.3 metres depth, including
9.6 metres @ 12.5% zinc & 14 g/t silver from 316.4 metres depth.

Camp area:
Hole A20-180

1.3 metres @ 34.6% zinc, 0.9% lead & 190 g/t silver from 89.0 metres depth.

Hole A20-181

5.9 metres @ 11.4% zinc, 1.9% lead & 39 g/t silver from 225.2 metres depth.

Hole A20-181a

16.0 metres @ 4.1% zinc & 10 g/t silver from 240.0 metres depth.

Hole A20-182

4.8 metres @ 3.8% zinc, 3.0% lead & 93 g/t silver from 191.5 metres depth; and
3.9 metres @ 21.1% zinc & 33 g/t silver from 301.8 metres depth.

Hole A20-183

6.0 metres @ 3.0% zinc, 2.1% lead & 57 g/t silver from 202.0 metres depth.


Mineralization is mostly associated with gently-dipping sulphide “mantos” hosted in limestones. True thicknesses of the mantos are estimated to be at least 90% of the downhole thicknesses. The intervals marked * are vein-style hosted by sandstones and have an unknown true thickness. Refer to map and cross sections in Figures 1 and 2.



Read more at:
https://mailchi.mp/829bac529da4/vm93876nvg?e=e6d14b37f4

TINKA DRILLS 8 METRES GRADING 31% ZINC & 225 GRAMS PER TONNE SILVER AT AYAWILCA

January 28, 2021

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce assay results for seven drill holes from the ongoing resource expansion and infill drill program at the Ayawilca project in Peru. Hole A20-177 intersected very high grade vein-style zinc-silver-lead mineralization outside of the zinc resource at about 100 metres depth. Three holes (A20-178, 177 & 175) also successfully intersected high grade manto-style zinc mineralization at the Camp area. Hole A20-179 was an infill hole at the West area which intersected two wide zones of mineralization with better than expected zinc grades. The other three holes intersected extensions of zinc-rich mineralization at the South area (holes A20-176, 174, 172). Tinka has now completed 6,500 metres of the planned 7,500 metres in the resource drilling program. Sixteen holes have been completed with two in progress (A21-185 & 186) and at least two more are planned before the end of the program. Results are now reported for half of the drill holes in the current program.

Drill Highlights:

Camp area:

Hole A20-177

*19.2 metres @ 15.6% zinc. 1.5% lead & 154 g/t silver from 101.1 metres depth, including
*1.9 metres @ 24.9% zinc, 7.7% lead & 604 g/t silver from 101.1 metres depth; and
*7.8 metres @ 31.3% zinc, 1.7% lead & 225 g/t silver from 112.5 metres depth; and
34.0 metres @ 7.4% zinc & 8 g/t silver from 290.0 metres depth, including
16.6 metres @ 9.5% zinc & 10 g/t silver from 298.3 metres depth;

Hole A20-178

42.1 metres @ 6.3% zinc & 14 g/t silver from 281.9 metres depth, including
20.4 metres @ 9.8% zinc & 15 g/t silver from 289.5 metres depth, including
7.9 metres @ 16.7% zinc & 27 g/t silver from 302.0 metres depth.

Hole A20-175

*1.2 metres @ 43.6% zinc & 212 g/t silver from 136.5 metres depth; and
16.4 metres @ 4.4% zinc & 7 g/t silver from 235.7 metres depth.

West Area:

Hole A20-179

31.9 metres @ 6.0% zinc & 15 g/t silver from 224.1 metres depth, including
11.8 metres @ 8.4% zinc & 32 g/t silver from 242.0 metres depth; and
34.6 metres @ 7.0% zinc & 6 g/t silver from 270.0 metres depth, including
12.2 metres @ 9.4% zinc & 5 g/t silver from 276.0 metres depth.

South Area:

Hole A20-176

11.2 metres @ 5.3% zinc & 27 g/t silver from 336.2 metres depth.

Hole A20-174

1.2 metres @ 10.3% zinc & 4 g/t silver from 318.6 metres depth.

Hole A20-172

*0.9 metres @ 5.9% zinc, 5.3% lead & 733 g/t silver from 178.7 metres depth; and
7.2 metres @ 5.1% zinc & 15 g/t silver from 277.2 metres depth.

Mineralization is mostly associated with gently-dipping sulphide “mantos” hosted in limestones. True thicknesses of the mantos are estimated to be at least 90% of the downhole thicknesses. The intervals marked * are vein-style hosted by sandstones and have an unknown true thickness. Refer to map and cross sections in Figures 1 and 2.

President and CEO of Tinka, Dr. Graham Carman, stated: “The 2020-21 Ayawilca drill program continues to deliver high-grade zinc mineralization with significant silver credits. We are particularly excited about the very high-grade zinc-silver vein intersection in hole A20-177, one of the best grade intersections we have ever had at Ayawilca and especially attractive as it occurs at shallow depth. The vein-style mineralization was intersected at a low-angle to the drill core axis so the true width of the vein is currently unknown. The thick vein is hosted in the quartz sandstone member of the Goyllar Formation which was not previously considered as a favourable host rock. The shallow nature of the mineralization (about 100 m depth) opens up the possibility for high-grade zinc-silver-lead resources much closer to surface than previously thought. We plan to follow up this vein with more drilling before the end of the current program to better define its geometry and extent.”

“Drill holes at the Camp area have also discovered strong manto-style zinc mineralization outside of the current resource hosted within the limestones. Drilling is continuing currently at the South area with two rigs operating. We expect the program to be completed in February, after which time the data will be compiled for a resource and PEA update. We continue to believe that Ayawilca is perfectly positioned to take advantage of the current positive market sentiment towards base metals, and we look forward with anticipation to the results for the final half of the drill program.”

Read at:
https://mailchi.mp/f901a304bc0b/gtc64gwez1?e=e6d14b37f4

TINKA DRILLS 39 METRES GRADING 9.3% ZINC AT AYAWILCA

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce results of four drill holes from the current drill program at Ayawilca. Three of the holes targeted extensions of indicated resources at West and South Ayawilca (holes A20-170, 171 & 175) while one hole is an infill hole at West Ayawilca (A20-173).

The Company has now completed approximately 6,000 metres of the planned 7,500 metres drill program in the resource expansion program. Many of the completed holes have targeted zinc-silver mineralization in the area between West and South Ayawilca, an area that has not been well drill tested (see Figure 1). Two rigs are operational and are expected to remain at site until February 2021. So far, sixteen diamond drill holes have been completed (A20-169 to A21-184). Results for eleven of these holes are pending.

Drill Highlights:
Hole A20-170 (South Ayawilca)

38.8 metres @ 9.3% zinc & 14 g/t silver from 282.6 metres to 321.4 metres depth, including
13.7 metres @ 15.9% zinc & 26 g/t silver from 282.6 metres depth;
The wider intersection is an extension of the mineralized interval reported on November 30, 2020, to a depth of 309 metres only; and
4.5 metres @ 14.5% zinc & 31 g/t silver from 340.1 metres depth; and
5.0 metres @ 5.2% zinc. 0.6% lead & 16 g/t silver from 352.4 metres depth.


Hole A20-173 (West Ayawilca)

18.7 metres @ 7.2% zinc & 11 g/t silver from 187.3 metres depth, including
7.3 metres @ 11.8% zinc & 21 g/t silver from 196.0 metres depth; and
23.9 metres @ 6.2% zinc & 8 g/t silver from 252.1 metres depth; and
2.8 metres @ 15.0% zinc & 6 g/t silver from 284.0 metres depth.


Hole A20-175 (West Ayawilca)

1.2 metres @ 43.6% zinc, 0.5% lead & 212 g/t silver from 136.5 metres depth, and
14.3 metres @ 5.0% zinc & 9 g/t silver from 235.7 metres depth.


Hole A20-171 (West Ayawilca - vein style)

0.4 metres @ 19.6% zinc & 99 g/t silver from 110.0 metres depth.


Mineralization in holes A20-170, A20-173 & A20-175 is associated with gently-dipping sulphide rich “mantos” hosted in limestones. True thicknesses of the mantos are estimated to be at least 90% of the downhole thicknesses. Mineralization in hole A20-171 is vein style hosted by sandstones which has an unknown true thickness. Cross sections of holes A20-170 and A20-173 are shown in Figures 2 and 3, respectively.

President and CEO of Tinka, Dr. Graham Carman, stated: “Ayawilca continues to produce strong zinc results with significant silver credits. Hole A20-170 is expected to expand our indicated resources at South Ayawilca, with mineralization still open to the southeast. Holes A20-173 and A20-175 have improved our geological model of the central portion of West Ayawilca with good grades also intersected in these holes.“


“We await with much anticipation the assay results for the eleven pending drill holes, and we still have a handful more holes to drill. The receipt of results from the lab continues to be slow due to coronavirus pandemic protocols in Peru. Drilling will continue for the next few weeks, focusing on expanding our high-grade indicated resources at South Ayawilca that will be reflected in an updated Preliminary Economic Assessment (PEA) planned for mid-2021.”

“Ayawilca contains one of the higher-grade zinc resources anywhere in the world, and we are very excited to see zinc prices reflect the lack of significant new supply. We strongly believe that Ayawilca is perfectly positioned to take advantage of current positive market sentiment towards base metals.”

Read more and view graphics at:
https://mailchi.mp/741eb8c4bd39/zvxkw6xrpw?e=e6d14b37f4

Tinka Resources

November 30, 2020

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce partial results from drill hole A20-170 and full results from A20-169, the first two holes of the 2020 drill program at the Ayawilca project in central Peru. Drill hole A20-170 at South Ayawilca intersected several zones of high-grade zinc (silver-lead) mineralization from 203 metres to 357 metres depth, with assay results reported here to a depth of 309 metres only. Assay results for mineralized samples beyond 309 metres depth are pending. The receipt of assays from the laboratory has been slower this year due to the impacts of COVID-19 in Peru.

Drill Highlights:

Hole A20-170 (South Ayawilca)

- 12.2 metres @ 4.1% zinc, 1.2% lead & 60 g/t silver from 202.9 metres depth, including
- 2.2 metres @ 10.2% zinc, 2.5% lead & 121 g/t silver from 202.9 metres depth; and
- 3.7 metres @ 6.5% zinc, 0.1% lead & 13 g/t silver from 243.2 metres depth; and
- 25.9 metres @ 10.0 % zinc & 15 g/t silver from 282.6 metres to end of sampled interval, including
- 13.7 metres @ 15.9% zinc & 26 g/t silver from 282.6 metres depth;
These are partial results only – significant visible zinc and iron sulphide mineralization has been observed from 309 metres depth (end of reported interval above) to the contact with the underlying phyllite at 357 metres depth – assay results for this interval are pending;
Mineralization is associated with gently dipping sulphide rich “mantos” hosted by limestones;
True thicknesses of the manto intersections are estimated to be at least 90% of the downhole thicknesses.


Hole A20-169 (West Ayawilca)

- 0.9 metres @ 13.7% zinc, 0.6% lead & 133 g/t silver from 108.8 metres depth; and
- 1.1 metres @ 12.4% zinc, 2.1% lead & 147 g/t silver from 136.0 metres depth; and
- 1.1 metres @ 18.8% zinc, 5.0% lead & 172 g/t silver from 190.0 metres depth; and
- 0.7 metres @ 15.2% zinc, 1.3% lead & 71 g/t silver from 210.5 metres depth; and
- 1.2 metres @ 22.7% zinc, 3.9% lead & 190 g/t silver from 356.8 metres depth.
Mineralization in hole A20-169 is vein style – these veins have unknown true thicknesses.


Hole A20-170 is an infill hole within the overall footprint of the inferred resource at South Ayawilca. Hole A20-169 is a step-out hole 75 metres west of the existing inferred resource at West Ayawilca – this hole intersected several high-grade but narrow zinc-silver-lead veins. So far in the drill program, approximately 2,500 metres have been completed in seven drill holes (see Figure 1 for a map of drill holes). The overall program is now expected to extend into early 2021. Several drill targets still remain to be tested, including the large area between West and South Ayawilca which has seen limited past drilling.


Read more at:
https://mailchi.mp/89ff17500f31/tinka-drills-26-metres-grading-10-zinc-at-ayawilca?e=e6d14b37f4

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to provide an update on the ongoing drill program at the Company’s 100% owned Ayawilca zinc-silver project in central Peru.

As at today’s date, 2,000 metres have been drilled in the 2020 program and the overall program is about 30% complete. A third rig has been mobilized to site and has commenced drilling. We now expect the drill program to continue until February 2021, at which time we will take a break in the drilling to compile data and update the project resource estimations.

Three holes have been completed since the program commenced in October (drillholes A20-169, 170, and 171), and three holes are in progress (drillholes A20-172, 173 and 174). Samples for the first two drillholes are in the laboratory, and we expect assay results to be received by the end of November.

Rad more at:
https://mailchi.mp/1f6805bdb785/2afh5b38i9?e=e6d14b37f4

Tinka Resources

November 10, 2020, interview of CEO Graham Carman by Danielle Fernandes of Bantr

As you may have seen in our news releases lately, Tinka is drilling again on its Ayawilca project in Peru. The drilling was supposed to start in April but plans were delayed by six months due to COVID-19. I know that it has not been easy being a Tinka shareholder during this period because of a lack of exploration news, but fortunately that will soon change with the first batch of exploration results coming out late this month and continuing into Q1 2021.

Tinka currently has two drill rigs on site and that will shortly increase to three. The first drill holes are drilling at West and South Ayawilca, where past drilling has encountered the thickest and highest grade areas of mineralization. Drilling will test potential mineralization across to the west side of the Colquipucro fault, where previous drilling indicated potential extensions of silver rich zinc mineralization. Later in the program one rig will test potential extensions at the Colqui Silver Zone, a separate silver oxide deposit where mineralization starts at surface making it amenable to open pit extraction. The drill program is expected to comprise of 7,000 metres in 20 drill holes and is expected to continue until at least February 2021, at which time we will most likely pause for a resource update.

The objectives of the drill program are to:

- Increase the size of the high grade Zinc Zone resources;
- Target silver rich zones on the perimeter of the Zinc Zone and at the Colqui Silver Zone;
- Improve geological and technical understanding of the Ayawilca deposit.

Read more and get link to the interview at:
https://mailchi.mp/34ff09a310ca/tinka-ceo-update-and-interview?e=e6d14b37f4

Tinka Resources - 7,000 metre drill program at the Ayawilca zinc-silver project in central Peru

October 8, 2020

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce that the Company has commenced a 7,000 metre drill program at the Company’s 100% owned Ayawilca zinc-silver project in central Peru. The 20-hole program is anticipated to take approximately three months to complete. The timing of the completion of the drill program may vary as a result of the Company’s health and safety measures implemented to prevent the spread of COVID-19.

The drill program has two objectives: firstly, to convert inferred resources to indicated resources in areas at the project with thick, high grade zones of mineralization; and, secondly, to test for extensions of zinc and silver mineralization down-dip of known zones in several planned step-out holes. Later in the program, step-out holes will also be drilled to test new exploration targets at the Colqui Silver Zone.

Read more at:
https://mailchi.mp/6447f719e5a9/v0vypxl2ub?e=e6d14b37f4

Tinka Resources Limited - update on exploration activities

September 9, 2020

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to provide an update on exploration activities at its 100%-owned Ayawilca zinc-silver project in Peru. Preparations are underway for a ~7,000 metre drill program consisting of approximately 20 diamond drill holes. Three drill rigs are expected to mobilize to site and commence drilling by the end of September 2020. The program will target areas where earlier drilling identified high grade zinc and silver mineralization, often outside of the known resources. Most of these zones lie adjacent to the Colquipucro Fault, an important north-northwest trending regional structure (Figures 1 and 2). It is anticipated that the drill program will be completed in early 2021, subject to potential delays as a result of the COVID-19 pandemic. A framework of stringent health and safety measures has been implemented, which includes protocols to prevent the spread of COVID-19, and, as a result, the timing of the start and completion of the drill program may vary.

The 2020 drill program will focus on a combination of resource step-out drilling in areas where mineralization remains open to increase resources, and infill drilling to upgrade the category of the Ayawilca resources in areas of high grade mineralization. Priority targets include:

West Ayawilca: Step-out holes down-dip of previous drill hole intersections, which include 10 metres grading 665 g/t silver, 1.4% zinc and 1.9% lead in drill hole A18-131 (not included in resource estimate) and 31.9 metres grading 9.6% zinc & 19 g/t silver in hole A18-118 (included in inferred resource) (see news releases dated October 15, 2018, and May 24, 2018).
West Ayawilca: Infill drilling to upgrade Inferred resources into Measured or Indicated categories (approximately 50% of program). Current Inferred resource includes drill hole intercepts such as 10.4 metres grading 44.0% zinc & 43 g/t silver in hole A18-129 (see news release dated June 26, 2018).
The Colqui Silver Zone: Step-out holes are planned to test for possible down-dip extensions of the oxide silver mineralization. Previous drill hole highlights include 128 metres grading 91 g/t silver in CDD4, and 52 metres grading 155 g/t silver in hole CDD43 (see Figure 3).

The Ayawilca Zinc Zone (sulphide) contains an estimated 1.8 billion pounds zinc and 5.8 million ounces silver in the Indicated category, and 5.6 billion pounds zinc and 25.2 million ounces silver in the Inferred category (see news release dated November 26, 2018). The Colqui Silver Zone (oxide) contains an estimated 14.3 million ounces silver in the Indicated category and 13.2 million ounces silver in the Inferred category, with mineralization starting from surface (see link to Technical Report dated July 2, 2019).

Read more at:
https://mailchi.mp/71a360f4583a/tinka-provides-update-on-upcoming-drill-program-at-ayawilca-zinc-silver-project?e=e6d14b37f4

Tinka Provides Update On Peru Activities

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to advise that the Company’s employee in Peru who tested positive to COVID-19 as disclosed on March 26th has now fully recovered from the virus and is in good health. To the best of our knowledge, there are no other cases of COVID-19 infection amongst Tinka employees or in the communities associated with our activities in the Pasco region of Peru.

The state of emergency in Peru has been in place since March 15th and is now extended until May 24th following a recent announcement by the government of Peru. Mining is one of the key sectors of the Peruvian economy, and the government has indicated that mining will be one of the first industries to recommence after the lockdown eases, using a phased stage approach. The restart in mining will begin with large operations and strategic mining projects under construction, while exploration and development projects like Ayawilca will commence a short while after.

Tinka’s employees in Peru have been in self-isolation during the lockdown, while our community relations team has continued to engage with the local communities in preparedness for an increase in work activities to follow. Prior to the restart of exploration activities, Tinka will be required (along with all resource companies) to obtain approval from government bodies for its own health protocols. The protocols will incorporate self distancing, disinfection procedures and COVID-19 testing among other measures. The Company is planning for the next exploration phase at Ayawilca to commence during the latter part of 2020, which is expected to include at least 7,000 metres of infill and step-out drilling, with a focus on growing and upgrading the high-grade zinc-silver resources at West and South.

Tinka is well funded, following the investment by Buenaventura and Sentient in January 2020, and has no debt. The Company has also taken steps to reduce its overhead costs to match reduced levels of activities.

President and CEO of Tinka, Dr. Graham Carman, stated: “Tinka’s fundamentals remain strong following the strategic financing completed early in 2020, underpinned by our 100% owned Ayawilca zinc-silver project. The safety of our employees and their families and our nearby communities remains our highest priority, and our Peruvian management team is to be congratulated for its decisive response to prevent the spread of COVID-19 at our project camp. Corporate administration costs have been reduced during this lockdown period as we aim to preserve the Company’s cash position. We look forward to updating the market as our field activities in Peru recommence in coming weeks.”




Read at:
https://www.tinkaresources.com/news/tinka-provides-update-on-peru-activities-2020-05-11

News Out - Tinka Intersects Exceptional Zinc Grades at Ayawilca and Expands Silver Zone Discovery

News Link
https://www.prnewswire.com/news-releases/tinka-intersects-exceptional-zinc-grades-at-ayawilca-and-expands-silver-zone-discovery-300933467.html


NEWS PROVIDED BY

Tinka Resources Limited
Oct 08, 2019, 07:00 ET

VANCOUVER, Oct. 8, 2019 /PRNewswire/ - Tinka Resources Limited ("Tinka" or the "Company") (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce assay results for three recent drill holes at the Company's 100%-owned Ayawilca project in Peru.

Hole A19-165 has returned some of the best zinc intersections ever drilled at South Ayawilca, both from within and immediately outside of the zinc resource boundary. The hole intercepted four separate, gently dipping mineralized zones with downhole thicknesses of between 9 and 29 metres and grading between 11.8% and 14.0% zinc, within a cumulative downhole interval of 170 metres (note: downhole thicknesses approximate true thicknesses in this hole). A summary of the assays from the four intervals in hole A19-165 is provided below.

Hole A19-167, a recently completed and deepened 2017 drill hole, intersected very high grade silver mineralization (>1,000 g/t Ag) accompanied by base metals (14.5% Zn, 0.3% Pb) over a narrow 1.7 metre interval approximately 100 metres beneath the existing Zinc Zone resource, within a wider zone of lower grade silver mineralization associated with strongly altered Pucará limestone (see Figure 1). The silver intersection in hole A19-167 lies 80 metres from the silver intersection in hole A19-163 (13.9 metres at 130 g/t Ag; see Sep. 5, 2019, news release). This new "Silver Zone" discovery supports Tinka´s view that Ayawilca still has significant exploration potential, including upside for precious metals.

Key highlights from recent drill holes at South Ayawilca:

Zinc Zone:
Hole A19-165

9.0 metres @ 11.9% zinc & 18 g/t silver from 117.2 metres; and
25.9 metres @ 11.8% zinc, 0.2% lead, 23 g/t silver & 325 g/t indium from 167.8 metres, including
4.0 metres @ 24.6% zinc, 33 g/t silver, 0.1% lead & 475 g/t indium from 169.1 metres;
7.0 metres @ 18.9% zinc, 42 g/t silver, 0.5% lead & 584 g/t indium from 178.4 metres; and
28.7 metres @ 14.0 % zinc, 14 g/t silver, 0.1% lead & 101 g/t indium from 214.6 metres, including
18.65 metres @ 17.4% zinc, 11 g/t silver, & 68 g/t indium from 221.5 metres; and
14.9 metres @ 12.3% zinc, 38 g/t silver, 0.6% lead & 297 g/t indium from 271.5 metres, including
1.2 metres @ 36.6% zinc, 80 g/t silver, 0.2% lead & 1020 g/t indium from 278.6 metres;
0.95 metres @ 44.1% zinc, 90 g/t silver, 0.3% lead & 867 g/t indium from 285.45 metres.
Hole A19-166

0.8 metres @ 38.5% zinc, 117 g/t silver & 0.4% lead & 442 g/t indium from 122.3 metres; and
0.85 metres @ 31.1% zinc, 40 g/t silver & 311 g/t indium from 138.7 metres.
Silver Zone:
Hole A19-167 (extension of drill hole A17-064 from 361 metres depth)

7.3 metres @ 4.9% zinc, 366 g/t silver & 0.5% lead from 412.7 metres, including
*1.7 metres @ 14.5% zinc, 1,130 g/t silver & 0.3% lead from 412.7 metres; and
7.85 metres @ 6.1% zinc, 150 g/t silver & 0.8% lead from 434.45 metres, including
0.9 metres @ 21.7% zinc, 415 g/t silver & 3.0% lead from 434.5 metres.
Note: True thicknesses of the Zinc Zone intersections are estimated to be approximately equal to the downhole thicknesses in hole A19-165 and at least 85% of the downhole thicknesses in A19-166. The true thickness of the Silver Zone intersections in A19-167 cannot be determined at this time as insufficient data is available.

Dr. Graham Carman, Tinka's President and CEO, stated: "Hole A19-165 is an exceptional drill hole with four separate mineralized intervals with outstanding zinc grades over significant thicknesses, confirming continuity of the mineralization and increasing confidence in our geological model. Zinc grades in the upper two zones were higher than predicted by the resource model (see Figure 1). Multiple phases of zinc mineralization, as indicated by spectacular colour banding of the sphalerite crystals, indicate that the mineralization at Ayawilca was multi-phase while also highlighting the fact that each phase added to the zinc grade of the deposit (see Figures 2 and 3)".

"We are also excited by the high grade Silver Zone discovery in hole A19-167, originally a 2017 Tinka drill hole that was recently deepened to test extensions of the silver mineralization encountered in hole A19-163. The success of A19-167 proves that Ayawilca has very high -grade silver mineralization which is believed to have developed around the edge of the Ayawilca Zinc Zone. This recent discovery offers a new exploration target and potentially significant precious metal upside to supplement the very large zinc resource."

"The 2019 drill program at South Ayawilca is greatly improving our understanding of the structural and lithological controls of the high grade zinc mineralization. Drill hole A19-166 was drilled at a very shallow angle and confirmed the geometry of a locally overturned anticline which has acted as a structural trap for the zinc mineralization. An additional drill hole, A19-168 was recently collared, which will act as an additional infill hole and provide further geotechnical information."

Notes to Figure 1:

The zinc block model is based on the base case mineral resource estimate at a US$55/t cut off (Nov. 26, 2018). High grade (>US$100/t or >6.5% ZnEq) zinc resource blocks are coloured red, lower grade blocks are coloured in green (>US$55/t or 3.6% ZnEq) and blue coloured blocks are below the cut off.
The NSR value was based on estimated metallurgical recoveries, assumed metal prices and smelter terms, which include payable factors, treatment charges, penalties, and refining charges. Metal price assumptions were: US$1.15/lb Zn, US$300/kg In, US$15/oz Ag, and US$1.0/lb Pb. Metal recovery assumptions were: 90% Zn, 75% In, 60% Ag, and 75% Pb. The NSR value for each block was calculated using the following NSR factors: US$15.34 per % Zn, US$4.70 per % Pb, US$0.18 per gram In, and US$0.22 per gram Ag.
The NSR value was calculated using the following formula:
NSR = [Zn(%)*US$15.34+Pb(%)*US$4.70+In(g/t)*US$0.18+Ag(g/t)*US$0.22].
The ZnEq value was calculated using the following formula: ZnEq = NSR/US$15.34.
Details of assay intervals within the core photo above:

179.3-181.3 metres (sample 47295): 2.0 metres grading 27.8% Zn, 23 g/t Ag, 0.02% Pb, 733 g/t In
181.3-182.1 metres (sample 47296): 0.8 metres grading 5.9% Zn, 13 g/t Ag, 0.02% Pb, 95 g/t In
182.1-183.2 metres: (sample 47297): 1.1 metres grading 31.2% Zn, 38 g/t Ag, 0.34% Pb, 558 g/t In.

Note: The photos shown in Figures 2 and 3 are of selected intervals and not necessarily indicative of mineralization hosted on the property.

Table 1 – Summary of new drill hole assays from Ayawilca

Drill Hole

From (m)

To (m)

Interval (m)

Zn %

Pb %

Ag ppm

In ppm

A19-165

117.20

126.20

9.00

11.9

0.0

18

40

incl

125.10

126.20

1.10

37.2

0.0

36

136

and

167.80

193.70

25.90

11.8

0.2

23

325

incl

169.10

173.10

4.00

24.6

0.1

33

475

incl

178.40

185.40

7.00

18.9

0.5

42

584

and

214.60

243.30

28.70

14.0

0.1

14

101

incl

221.50

240.15

18.65

17.4

0.0

11

68

and

271.50

286.40

14.90

12.3

0.6

38

297

incl

278.60

279.80

1.20

36.6

0.2

80

1,020

incl

285.45

286.40

0.95

44.1

0.3

90

867

A19-166

122.30

123.10

0.80

38.5

0.4

117

442

and

138.70

139.55

0.85

31.1

0.0

40

311

A19-167

384.50

388.00

3.50

2.8

0.5

222

0

and

412.70

420.00

7.30

4.9

0.5

366

0

incl

412.70

414.40*

1.70

14.5

0.3

1,130

0

and

434.45

442.30

7.85

6.1

0.8

150

0

incl

434.45

435.35

0.90

21.7

3.0

415

2

Note: True thicknesses of the zinc intersections in hole A19-165 are estimated to be approximately equal to the
downhole thicknesses, and at least 85% of the downhole thicknesses in hole A19-166. The true thicknesses of the intersections in hole A19-167 cannot be determined at this time as insufficient data is available.

Table 2 – 2019 Drill Collar Information (coordinates are in UTM Zone 18S WGS84 datum)

Hole ID

Easting

Northing

Elevation

Azimuth

Dip

Final Depth m

A19-165

333047

8845065

4197

280

-62

463.5

A19-166

333047

8845065

4197

280

-40

250.5

A19-167

(extension of A17-064
from 361.1 metres depth)

333061

8844994

4191

290

-50

506.0

Notes on sampling and assaying
Drill holes are diamond HQ or NQ size core holes with recoveries generally above 80% and often close to 100%. The drill core is marked up, logged, and photographed on site. The cores are cut in half at the Company's core storage facility, with half-cores stored as a future reference. Half-core is bagged on average over 1 to 2 metre composite intervals and sent to ALS laboratories in Lima for assay in batches. Standards and blanks are inserted by Tinka into each batch prior to departure from the core storage facilities. At the laboratory samples are dried, crushed to 100% passing 2mm, then 500 grams pulverized for multi-element analysis by ICP using multi-acid digestion. Samples assaying over 1% zinc, lead, or copper and over 100 g/t silver are re-assayed using precise ore-grade AAS techniques.

Qualified Person
Dr. Graham Carman, Tinka's President and CEO, reviewed, verified and compiled the technical contents of this release. Dr Carman is a Fellow of the Australasian Institute of Mining and Metallurgy, and is a qualified person as defined by National Instrument 43-101.

About Tinka Resources Limited
Tinka is an exploration and development company with its flagship property being the 100%-owned Ayawilca carbonate replacement deposit (CRD) located in the zinc-lead-silver belt of central Peru, 200 kilometres northeast of Lima. The Ayawilca Zinc Zone contains 11.7 Mt of Indicated Resources grading 6.9% zinc, 0.2% lead, 15 g/t silver and 84 g/t indium and 45.0 Mt Inferred Resources grading 5.6% zinc, 0.2% lead, 17 g/t silver and 67 g/t indium. The Ayawilca Tin Zone contains an Inferred Mineral Resource of 14.5 Mt at 0.63% tin, 0.21% copper & 18 g/t silver (November 26, 2018 release). The Colquipucro silver oxide deposit contains 2.9 Mt of Indicated Resources grading 112 g/t silver (for 10.4 Moz Ag) and 2.2 Mt Inferred Resources grading 105 g/t silver (for 7.5 Moz Ag) in high grade lenses within a preliminary open pit shell using a $46/t NSR cut off (November 26, 2018 release). A Preliminary Economic Assessment for the Ayawilca Zinc Zone was released on July 2, 2019 (see release).

On behalf of the Board,

"Graham Carman"
Dr. Graham Carman, President & CEO

Tinka Drills 5.7 Metres At 32.6% Zinc At Ayawilca

September 5th, 2019

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce assay results for two recent holes drilled at the Company’s 100%-owned Ayawilca Property in central Peru. Drilling is continuing with one rig operating at the South Ayawilca area, with the focus on expanding and upgrading the high-grade ‘Zinc Zone’ mineralization as defined in the Company’s recent Preliminary Economic Assessment (PEA).

Hole A19-163 intercepted two intervals of high grade zinc mineralization close to the margin of the current inferred resource. The hole intersected one of the highest grade intervals ever drilled at South Ayawilca.In addition, a new style of silver-rich mineralization with disseminated zinc - lead was intersected deeper in hole A19-163 within a down-faulted limestone more than 100 metres beneath the current resource, with mineralization remaining open to the west and at depth. The footprint of the mineralization at Ayawilca continues to expand, and still offers exciting exploration upside.

Key Highlights from hole A19-163:

Zinc Zone:

34.7 metres grading 6.7% zinc, 11 g/t silver and 86 g/t indium from 171.0 metres, including
5.7 metres grading 9.7% zinc, 12 g/t silver and 147 g/t indium from 199.1 metres; and
5.7 metres grading 32.6% zinc, 20 g/t silver and 89 g/t indium from 228.0 metres; and

Lower Silver Zone:

13.9metres grading 1.0% zinc, 0.6% lead and 128 g/t silver from 397.7 metres, including
0.6 metres grading 5.4% zinc, 3.5% lead and 818 g/t silver from 397.7 metres depth.

Note: True thicknesses of the Zinc Zone intersections are estimated to be at least 85% of the downhole thicknesses. The true thickness of the Lower Silver Zone intersection cannot be determined at this time as insufficient data is available.


Read more at:
https://www.tinkaresources.com/news/tinka-drills-5-7-metres-at-32-6-zinc-at-ayawilca

Tinka Announces Filing Of NI 43-101 Technical Report For The PEA On The Ayawilca Property, Peru

August 15th, 2019

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) announces that it has filed a National Instrument 43-101 Technical Report (the “Technical Report”) for the Preliminary Economic Assessment (“PEA”) on the Ayawilca Property, Peru, in support of the Company’s news release dated July 2, 2019 (the “News Release”). There are no material differences in the NI 43-101 Technical Report from the information disclosed in the News Release.

{{ see July 2nd below }}

The Technical Report was prepared by Amec Foster Wheeler Peru S.A. (Wood) as principal consultant, Transmin Metallurgical Consultants, and Roscoe Postle Associates Inc. (RPA), and is titled “Ayawilca Polymetallic Project, Department of Pasco, Central Peru – NI 43-101 Technical Report”.The Technical Report may be found under the Company’s profile on www.sedar.com and at the Company’s website at www.tinkaresources.com.

The Company held an investor webcast on Wednesday, July 31, 2019. Dr. Graham Carman presented a summary of the results of the Company’s PEA and discussed the next steps of the ongoing Ayawilca exploration program. Tinka’s shareholders and interested parties may listen to the July 31 webcast by using the following link: https://event.on24.com/wcc/r/2059247/4A04B90B7E1E103C32370F058F1FD77F


Read more at:
https://www.tinkaresources.com/news/tinka-announces-filing-of-ni-43-101-technical-report-for-the-pea-on-the-ayawilca-property-peru


***************

July 2nd news release


Tinka Reports Positive Pea For The Ayawilca Zinc Project
July 2nd, 2019

After-Tax NPV8% of US$363M and IRR of 27% Initial Capex of US$262M

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce positive results from the Preliminary Economic Assessment (“PEA”) prepared for its 100%-owned Ayawilca Zinc Zone project in central Peru. The PEA was prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101”) by Amec Foster Wheeler Peru S.A. (Wood) as principal consultant, Transmin Metallurgical Consultants, and RPA Inc.The PEA provides the initial economic assessment for an underground ramp-access mine development with a 5,000 tonnes per day processing plant.

PEA Highlights

After-tax NPV8% of US$363 million and pre-tax NPV8% of US$609 million using metal prices of US$1.20/lb zinc, US$18/oz silver, and US$0.95/lb lead on a 100% equity basis;

Initial Capex of US$262 million with after-tax IRR of 27.1% and pre-tax IRR of 37.2%;

21-year mine life with average head grades of 6.05% zinc, 18.3 g/t silver, 67.1 g/t indium, and 0.25% lead;

Average annual production of approximately 101,000 tonnes of zinc recovered in concentrate and approximately 906,000 ounces of silver in a silver-lead concentrate;

Leverage to zinc price: 20% increase in zinc price increases after-tax NPV8% to US$606 million;

Numerous opportunities identified for potential economic improvement & exploration upside.

Note: The PEA is preliminary in nature and includes inferred mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the preliminary economic assessment will be realized.Mineral resources are not mineral reserves and do not have demonstrated economic viability.


Read more at:
https://www.tinkaresources.com/news/tinka-reports-positive-pea-for-the-ayawilca-zinc-project

Tinka Drills 20 Metres At 15% Zinc And 10 Metres At 17% Zinc As Exploration Continues At Ayawilca For Additional High Grade

July 29th, 2019

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce assay results for four new drill holes at the Company’s 100%-owned Ayawilca Property in central Peru. Three holes were drilled at West Ayawilca and one hole was drilled at South Ayawilca.

Hole A19-162 at South Ayawilca intercepted thick zones of zinc mineralization within the existing resource, as expected, however the zinc grades are much higher than expected compared with adjacent holes and are approximately double the average grade of the Ayawilca Zinc Zone resource. Hole A19-162 also intercepted a weakly mineralized limestone layer in the lower portion of the hole, significant in the fact that it supports the Company’s thesis of possible limestone-hosted zinc mineralization lying beneath the existing resource.

Key Highlights from recent drilling

Hole A19-162 (South Ayawilca):

25.4 metres grading 11.6% zinc, 14 g/t silver and 223 g/t indium from 162.6 metres, including
10.0 metres grading 17.2% zinc, 14 g/t silver and 363 g/t indium from 176.0 metres; and
19.6 metres grading 15.2% zinc, 9 g/t silver and 212 g/t indium from 247.4 metres, including
7.2 metres grading 21.8% zinc, 12 g/t silver and 354 g/t indium from 259.8 metres;

Hole A19-159 (West Ayawilca):

11.2 metres grading 11.8% zinc and 24 g/t silver from 243.1 metres depth (resource infill);

Note: True thicknesses of the zinc intersections are estimated to be at least 85% of the downhole thicknesses. Mineralization in the above intervals are relatively flat-dipping replacement zones hosted by limestone and/or sandstone.

Also
Live Webcast: Tinka Resources - Investor Hour
Webcast Date: Wednesday, July 31, 2019 at 04:05 PM Eastern Daylight Time

The Company will hold a live Webcast - Investor Hour on Wednesday, July 31st 2019 at 4.05 pm EDT. The President and CEO, Graham Carman, will present the results of the Company’s recent PEA and discuss the next steps of the exploration program.The Investor Hour will be hosted by Gwen Preston of Resource Maven.Following the presentation, there will be a question and answer session moderated by Gwen.







Read More at (nice graphic):
https://www.tinkaresources.com/news/tinka-drills-20-metres-at-15-zinc-and-10-metres-at-17-zinc-as-exploration-continues-at-ayawilca-for-additional-high-grade

Tinka's (TKRFF) PEA Is Good, With A Meaningful Space For Further Improvements Left
|
The Ayawilca mine should produce 222.667 million lb zinc and 906,000 toz silver per year on average.

by Peter Arendas on Seeking Alpha July 5, 2019.

The initial CAPEX is estimated at $262 million, and the overall production costs (including the off-site costs) should be around $0.8/lb zinc.

The after-tax NPV (8%) equals $363 million and the after-tax IRR equals 27.1%, according to the PEA.

There are several ways to improve the economics of the project further.

Tinka Resources (OTCPK:TKRFF) released the results of its Peruvian Ayawilca zinc-silver project. Although the results are not bad, the market probably expected a little more, given the share price reaction. Tinka's shares declined by 22% since the PEA results were announced. However, it is hard to say to what extent the decline was caused by the PEA and to what extent it was caused by the continuing zinc market weakness.



Read more at:
https://seekingalpha.com/article/4273602-tinkas-pea-good-meaningful-space-improvements-left

Maybe the initial reaction to a positive PEA, but subsequent market action does not seem to like it.

Tinka Reports Positive Pea For The Ayawilca Zinc Project

July 2nd, 2019

After-Tax NPV8% of US$363M and IRR of 27% Initial Capex of US$262M

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce positive results from the Preliminary Economic Assessment (“PEA”) prepared for its 100%-owned Ayawilca Zinc Zone project in central Peru. The PEA was prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101”) by Amec Foster Wheeler Peru S.A. (Wood) as principal consultant, Transmin Metallurgical Consultants, and RPA Inc.The PEA provides the initial economic assessment for an underground ramp-access mine development with a 5,000 tonnes per day processing plant.

PEA Highlights

After-tax NPV8% of US$363 million and pre-tax NPV8% of US$609 million using metal prices of US$1.20/lb zinc, US$18/oz silver, and US$0.95/lb lead on a 100% equity basis;

Initial Capex of US$262 million with after-tax IRR of 27.1% and pre-tax IRR of 37.2%;

21-year mine life with average head grades of 6.05% zinc, 18.3 g/t silver, 67.1 g/t indium, and 0.25% lead;

Average annual production of approximately 101,000 tonnes of zinc recovered in concentrate and approximately 906,000 ounces of silver in a silver-lead concentrate;

Leverage to zinc price: 20% increase in zinc price increases after-tax NPV8% to US$606 million;

Numerous opportunities identified for potential economic improvement & exploration upside.


Read More At:
https://www.tinkaresources.com/news/tinka-reports-positive-pea-for-the-ayawilca-zinc-project

Anyone knows what got this lil stk higher today?

Tinka Reports High Zinc Recoveries In Metallurgical Tests From Ayawilca

June 5th, 2019

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce the results of metallurgical testwork on composite zinc sulfide samples from the Company’s 100%-owned Ayawilca property in central Peru.The metallurgical test program was carried out by XPS Consulting and Testwork Services, Ontario, under the coordination of Adam Johnston of Transmin Metallurgical Consultants.

Key Highlights

The objective of the testwork was to develop a flowsheet using standard flotation for the zinc mineralization at West and South Ayawilca, which was successfully achieved.
Testwork results have demonstrated that recoveries of 92% zinc at a concentrate grade of 50% zinc can be consistently achieved using a standard flotation process. Two locked cycle tests were carried out on two different styles of mineralization and both tests produced similar zinc concentrates.
Potentially deleterious elements in the zinc concentrates (including silica, manganese, cadmium, mercury, and arsenic) were well below standard smelter penalty levels.A small penalty is anticipated for iron content in the concentrate.
Indium in the two locked cycle zinc concentrates (719 ppm and 400 ppm, respectively) is very high and potentially payable, subject to the smelter and commercial arrangements.
Details of the processing flowsheet for zinc and lead concentrates will be incorporated into the upcoming Preliminary Economic Assessment (“PEA”).The Company expects to release the results of the PEA for the Ayawilca zinc project before the end of June 2019.


Read more at:
https://www.tinkaresources.com/news/tinka-reports-high-zinc-recoveries-in-metallurgical-tests-from-ayawilca

Tinka Commences 2019 Drill Program at Ayawilca

April 23rd, 2019

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce that the 2019 exploration drill program has commenced at its 100%-owned Ayawilca zinc project in central Peru.

An exploration drill program of up to 10,000 metres has commenced with one drill rig operating. It is anticipated a second rig will be mobilized to site within the next few weeks.Several deep holes are planned at West and South Ayawilca to test for structural repetitions of high-grade zinc mineralization in limestones beneath existing zinc resources, which will also double as infill holes.Additional holes will be drilled along strike of existing resources to test for extensions of the mineralization where the resource still remains open.

The Company’s Preliminary Economic Assessment for the Ayawilca zinc project (the “Ayawilca Project PEA”) is progressing well and remains on track to be completed by the end of Q2 2019.The Ayawilca Project PEA is based on the mineral resource estimate as at November 26, 2018 (see news release dated Nov. 26, 2018).

Read more at:
https://www.tinkaresources.com/news/tinka-commences-2019-drill-program-at-ayawilca

Anyone know how this site compares to Zinc One's site?

Tinka Announces Upcoming Exploration Drill Program At Ayawilca And Status Of PEA

February 28th, 2019

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce details of its upcoming exploration drill program and provide an update on the Preliminary Economic Assessment (“PEA”) for the Ayawilca zinc project, Peru.

Key Highlights

•An exploration drill program of up to 10,000 metres is anticipated to commence in April 2019.Exploration drilling will target structural repeats of the mineralized limestone beneath the current high-grade zinc resources at West, South, and Central Ayawilca. Drilling during 2018 confirmed that a deeper limestone unit exists and can host exceptional grade (including 10.4 m at 44% Zn in A18-129).

•The Company’s PEA is progressing well and is expected to be completed by mid 2019.The PEA, which is managed by Wood (Peru) as lead consultant, will not be impacted by the upcoming exploration drill program.Metallurgical test work on samples containing tin is currently being conducted as part of the PEA.

•This week, the Company filed an EIA modification for Ayawilca, which will extend the drill permit for an additional 2 years until the end of 2022.Once granted, the permit will allow sufficient drill platforms for a future Prefeasibility-stage infill drill program.The EIA modification is not required for the 2019 drill program, and is expected to be granted Q4 2019.

Tinka will be represented by its senior management and geological team at the Prospectors and Developers Association of Canada (“PDAC”) annual conference in Toronto from March 3 – 6 at booth 2937 in the Investors Exchange


Read more at:
https://www.tinkaresources.com/news/tinka-announces-upcoming-exploration-drill-program-at-ayawilca-and-status-of-pea

Tinka Announces Filing of NI 43-101 Technical Report on the Ayawilca Property, Peru

January 9th, 2019

Vancouver, Canada - Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) Vancouver, Canada announces that the Company has filed an updated independent National Instrument 43-101 Technical Report (the “NI 43-101 Technical Report”) on the Mineral Resource Estimate for the Ayawilca Property, Department of Pasco, Peru, in support of the Company’s news release dated November 26, 2018 (the “News Release”). There are no material differences in the NI 43-101 Technical Report from the information disclosed in the News Release.

Part of the Zinc Zone Mineral Resource is now classified as Indicated, incorporating a higher-grade portion of the deposit. In addition, the updated Inferred Mineral Resource is of a similar size and grade to the previous Zinc Zone resource reported in November 2017. The updated Tin Zone Inferred Mineral Resource is also substantially larger. This resources update follows a very successful drilling program, with the Company completing approximately 20,000 metres during 2018.

Key Highlights of Updated Mineral Resources at Ayawilca

Indicated Zinc Zone Mineral Resource of 11.7 million tonnes grading 6.9% zinc, 0.16% lead, 84 g/t indium and 15 g/t silver (8.1% zinc equivalent “ZnEq”), containing:
1.8 billion pounds of zinc;
983 tonnes of indium;
5.8 million ounces of silver; and
42 million pounds of lead.

Inferred Zinc Zone Mineral Resource of 45.0 million tonnes grading 5.6% zinc, 0.23% lead, 67 g/t indium and 17 g/t silver (6.7% ZnEq), containing:
5.6 billion pounds of zinc;
3,003 tonnes of indium;
25.2 million ounces of silver; and
230 million pounds of lead.

Inferred Tin Mineral Resource of 14.5 million tonnes grading 0.63% tin, 0.21% copper, and 18 g/t silver (0.70% tin equivalent “SnEq”), containing:
201 million pounds of tin;
67 million pounds of copper; and
8 million ounces of silver.

The Tin Zone and Zinc Zone resources do not overlap. The Mineral Resources have an effective date of November 26, 2018 and are reported above an NSR cut-off value of US$55/tonne, as estimated by Roscoe Postle Associates Inc. (“RPA”) of Toronto, Canada. Other key assumptions, parameters, and methods are:



Read more at:
https://www.tinkaresources.com/news/tinka-announces-filing-of-ni-43-101-technical-report-on-the-ayawilca-property-peru-2019

A followup interview about the November 28th, 2018 PR

With the Ayawilca Resource Updated, Next Step is a PEA Tinka Resources recently updated the zinc and tin mineral resource estimates for its Ayawilca project in Peru. This was the fourth zinc resource on Ayawilca and there has been tremendous growth in the total resources as a result of about 67,000 metres of diamond drilling. Of note in the most recent zinc resource was that a significant portion of the resource is now categorized as "Indicated".

With the updated and upgraded zinc resource, Tinka is now positioned as having one of the biggest undeveloped zinc resources controlled by a junior mining company. Moreover, the Ayawilca project is located in a mining-friendly jurisdiction and it has good infrastructure (road access, power, water). Ayawilca's zinc grades also compare favourably to the grades at existing and planned zinc mines in Peru. For all of these reasons, there has been significant interest from other mining companies in the Ayawilca project. Tinka's CEO, Graham Carman, discusses this in his most recent interview, which you can view by clicking on the graphic below.

Ken Engquist a Strong Addition to the Tinka Team
Tinka is now commencing work on the maiden Preliminary Economic Assessment ("PEA") on Ayawilca. Wood (formerly Amec Foster Wheeler) in Lima, Peru, has been engaged to lead the PEA. In conjunction with the commencement of the PEA, Tinka augmented its technical team by bringing on Ken Engquist. Mr. Engquist has a wealth of mining engineering experience. Recently, he has been involved with engineering studies for Arizona Mining's Hermosa project, which is now owned by South32. He has also been involved in other big base metals projects, including Nevsun's Timok copper project and Turquoise Hill/Rio Tinto's Oyu Tolgoi copper project. We believe Mr. Engquist is a great addition to the team. The news release announcing the PEA and hiring of Mr. Engquist can be found at the end of this email.

Market Fundamentals
If you had told me at a year ago that zinc inventories would drop over 50% and yet zinc prices would fall substantially, I would not have believed it. Likewise, I would not would have believed a prediction that Tinka would grow its zinc resources by over 30% and yet be trading at less than half of where the shares were trading a year ago. But, that is the market we have found ourselves in. Strong fundamentals (zinc cash premiums hitting new records - see chart below) are being overshadowed by negative market sentiment that has been largely driven by the trade war between the United States and China.


This past weekend's G20 dinner meeting between the two countries brought some glimmers of hope that the trade war will be resolved in the coming months. Hopefully that is the case and market conditions are more bullish in 2019, as trade wars are generally bad for everybody. Irrespective of whether a resolution is reached or not, it is important to remember that zinc fundamentals remain very tight and inventories can't drop much more. Something has to give and a number of analysts we have spoken with recently expect another leg up in zinc prices in 2019.

Some new zinc supply is coming on stream, albeit slowly, but the other reality is that mining companies are looking for new projects to fill the pipeline. We believe that Ayawilca is a great project for development and look forward to the results of the PEA. In the meantime, the company has a strong balance sheet and a path forward to add value to the Ayawilca project through de-risking and additional exploration.

We appreciate your interest and support, especially during these trying markets. Please don't hesitate to reach out with any questions or comments.



The original PR on November 28th, 2018
https://www.tinkaresources.com/news/tinka-commences-ayawilca-pea-and-strengthens-its-technical-team-with-the-engagement-of-ken-engquist

Tinka Commences Ayawilca PEA and Strengthens Its Technical Team With the Engagement of Ken Engquist
November 28th, 2018

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce that it has formally commenced a Preliminary Economic Assessment (“PEA”) on the Ayawilca Zinc and Tin Project in Peru.Wood (formerly Amec Foster Wheeler) in Lima, Peru, has been engaged as lead consultant to prepare the PEA.

In addition, Tinka is pleased to announce the appointment of Mr Ken Engquist as Managing Consultant, Project Development. Mr. Engquist’s role is to oversee development of the PEA on behalf of the Company. His track record and extensive experience adds additional leadership and project development expertise to an already strong in-country exploration team, led by Alvaro Fernández-Baca, VP Exploration. The management team is well qualified to ensure Tinka delivers a high value base metal project in one of the best mining jurisdictions in the industry.


Read more at:
https://www.tinkaresources.com/news/tinka-commences-ayawilca-pea-and-strengthens-its-technical-team-with-the-engagement-of-ken-engquist

Tinka Reports A Substantial Increase In Zinc And Tin Mineral Resources At Ayawilca

November 26th, 2018

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce an updated Mineral Resources estimate for its 100%-owned Ayawilca zinc and tin deposits in Peru. Part of the Zinc Zone Mineral Resource is now classified as Indicated, incorporating a higher-grade portion of the deposit. In addition, the updated Inferred Mineral Resource is of a similar size and grade to the previous Zinc Zone resource reported in November 2017. The updated Tin Zone Inferred Mineral Resource is also substantially larger. This resources update follows a very successful drilling program, with the company completing approximately 20,000 metres during 2018.

Key Highlights of Updated Mineral Resources at Ayawilca

--- Indicated Zinc Zone Mineral Resource of 11.7 million tonnes grading 6.9% zinc, 0.16% lead, 84 g/t indium and 15 g/t silver (8.1% zinc equivalent “ZnEq”), containing:
- 1.8 billion pounds of zinc;
- 983 tonnes of indium;
- 5.8 million ounces of silver; and
- 42 million pounds of lead.

--- Inferred Zinc Zone Mineral Resource of 45.0 million tonnes grading 5.6% zinc, 0.23% lead, 67 g/t indium & 17 g/t silver (6.7% ZnEq), containing:
- 5.6 billion pounds of zinc;
- 3,003 tonnes of indium;
- 25.2 million ounces of silver; and
- 230 million pounds of lead.

--- Inferred Tin Mineral Resource of 14.5 million tonnes grading 0.63% tin, 0.21% copper, & 18 g/t silver (0.70% tin equivalent “SnEq”), containing:
201 million pounds of tin;
67 million pounds of copper; and
8 million ounces of silver.

The Tin Zone and Zinc Zone resources do not overlap. The Mineral Resources are reported above an NSR cut-off value of US$55/tonne, as estimated by Roscoe Postle Associates Inc. (RPA Inc.) of Toronto, Canada.

Dr. Graham Carman, Tinka’s President and CEO, stated: “We are very pleased with the updated mineral resources estimation, as the Ayawilca deposit now represents one of the largest zinc resources held in a non-producing resources company. Ayawilca has for the first time, a high-grade Zinc Zone resource in the Indicated category containing 1.8 billion pounds of zinc (24% of the total zinc inventory), as well as an Inferred resource containing 5.6 billion pounds of zinc (76% of the total zinc inventory). Zinc resources were able to be partially upgraded to Indicated in those areas due to infill drilling at West and South Ayawilca in 2018. In addition, the Tin Zone resource has increased by 38% and now contains over 200 million pounds of tin. The updated Tin Zone resource is believed to be the largest undeveloped tin resource outside of a producing camp in Peru.”

“Tinka has had a very successful year at Ayawilca, expanding and upgrading the resources. We now look forward to completing our maiden PEA in the first half of 2019. Additional potential still exists for resource growth at Ayawilca, with additional step-out and deeper exploration drilling planned for 2019. The Company’s work programs are fully funded into the foreseeable future, with C$13 million in cash and no debt as at the end of September 2018.”


Read more at:
https://www.tinkaresources.com/news/tinka-reports-a-substantial-increase-in-zinc-and-tin-mineral-resources-at-ayawilca

Tinka Continues To Expand Zinc Mineralization And Discovers High-Grade Silver Veins At Ayawilca Peru

October 15th, 2018

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to provide an update of exploration results at the Ayawilca project in central Peru, including results for ten recent drill holes.

Key highlights:

Four resource step-out holes were drilled at South, Central and West Ayawilca. Hole A18-152 is a 60 metre step-out from known mineralization at South Ayawilca. Hole A18-158 is a 100 metre step-out from known mineralization at Central Ayawilca. A18-125 is a new intersection at Zone 3. Highlights include:
A18-152:
1.2 metres at 13.8% zinc, 0.8% lead, 817g/t silver and 64g/t indium from 156.3 metres depth.
A18-158:
1.5 metres at 9.6% zinc, 1.2% lead and 32g/t indium from 458.4 metres depth.
A18-125:
1.4 metres at 22.7% zinc & 99 g/t indium from 531.4 metres depth.
Note: Intercepts above are down-hole intercepts of ‘mantos’ hosted by limestone or sandstone. True thicknesses of the mantos are estimated to be at least 90% of the down-hole intercepts.
Three holes were drilled to test outcropping silver-lead-zinc carbonate veins at the “Vetas” area, a target drilled for the first time in 2018. High-grade silver intercepts occur with visible ‘ruby silver’ minerals and associated base metal sulphides in multiple vein structures. The grade - thickness of intercepts improve with depth due to a more favourable host rock (sandstone). The epithermal silver-lead-zinc carbonate vein system remains open and untested along strike and at depth.
Highlights include:
Hole A18-131:
2.5 metres (true width) at 665 g/t silver, 1.4% zinc & 1.9% lead from 264.0 m depth, including 1.5 metres (true width) at 925 g/t silver, 1.5% zinc & 2.8% lead from 266.0 m depth.
Tinka has drilled 20,200 metres at Ayawilca in 56 holes during the 2018 drill campaign, mostly as resource step-out holes. New zinc discoveries at West Ayawilca and the Camp areas, in particular, have significantly extended the mineralization beyond the existing resources (current estimated inferred mineral resources contain 5.6 billion pounds of zinc, 3,300 tonnes of indium, and 23 million ounces of silver with an additional 66,000 tonnes of tin; Nov. 2017 news release ). The 2018 drill campaign has now ended, as planned, allowing our technical team to compile all geological data and finalize interpretations.
Roscoe Postle Associates Inc (RPA) of Toronto has been appointed as independent consultant to undertake a mineral resource update, which is expected to be finalized by November 2018.
A Preliminary Economic Assessment (PEA) is scheduled for the first half of 2019.



Read more at:
https://www.tinkaresources.com/news/tinka-continues-to-expand-zinc-mineralization-and-discovers-high-grade-silver-veins-at-ayawilca-peru

Tinka Resources plans on meeting the high demand for zinc.

Sep 12, 2018

The Ayawilca Property is located 200 km northeast of Lima in the Department of Pasco, Central Peru, at altitudes of between 3,800 and 4,300 metres. The Property is 40 km northwest of the world-class Cerro de Pasco zinc-lead-silver mine, and 100 km south of the giant copper-zinc Antamina mine. Tinka owns 100% of the contiguous 150 km2 mining concessions at Ayawilca.

The company is focusing on growing the Ayawilca Mineral Resources. During 2017, around 20,000 metres of diamond drilling were completed at Ayawilca, and by December 2017 the drill program is ongoing. A new zinc discovery was made during 2017 at South Ayawilca that has significantly increased the resources at the Property. As announced on November 8, 2017, the Company announced a 130% increase to the previous zinc resources.

Read more at:
https://www.b-tv.com/tinka-resources-feature-ep-330/

********************************************

Another reference; and interview:

Tinka Resources to update resource and explore new discoveries after drilling 20,000m

Published on Sep 26, 2018

Tinka Resources Ltd (CVE:TK) chief executive Dr Graham Carman updates Proactive Investors on drilling results flowing from the company's flagship Ayawilca zinc and tin project in Peru. This year alone Tinka has drilled around 20,000 metres across the project area, adding to 46,000 metres drilled since the initial discovery. As a result, new discoveries have been made. "It's one of the largest zinc resources in the world, in a junior company, and we think it's going to be a mine," says Carman. A resource update is slated to be announced in a matter of weeks, with a PEA planned for the start of next year.


Watch at:

Tinka Reports Additional Step-Out & Infill Drill Holes At Ayawilca And Highlights Upper Manto Discovery

September 18th, 2018

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce results for twelve drill holes from the Company’s ongoing resource expansion and confirmation drill program at the 100% owned Ayawilca project, central Peru.

Key Highlights:

Five resource step-out drill holes at West, South, Central and Camp areas have all intersected significant zinc mineralization hosted mostly by Pucara limestone, the main host of the zinc sulphide mineralization;
Hole A18-148 intersected high-grade zinc (5.5 metres grading 10% zinc) 100 metres further east of the current resource at the Central area, with extensions to be tested later in 2018;
Hole A18-146 intersected high-grade zinc and silver mineralization (1.7 metres grading 27% zinc & 1520 g/t silver from 57 metres depth) in an ‘Upper Manto’ hosted by sandstone at the South area, above and lateral to the known limestone hosted resource. The Upper Manto has been observed in other drill holes and is considered significant due to its shallow depth and proximity to existing resources;
Hole A18-150 (9.6 metres grading 6% zinc) and adjacent hole A18-154 have extended known mineralization at the West area 120 metres to the northeast – mineralization remains open;
Seven resource infill holes are also reported from the West and South areas, drilled to improve the Company’s geological model and to target additional zinc mineralization at depth;
Tinka now plans to update the Ayawilca resource estimate in Q4 2018, while step-out drilling continues.

Graham Carman, Tinka´s President and CEO, stated: “The step-out drill hole results reported in this release are very positive, and show that the footprint of zinc mineralization at Ayawilca is getting larger. So far in 2018 we have discovered several new areas of significant zinc mineralization, including:

thick and high-grade intersections up to 150 metres to the northwest of the West Ayawilca resource (e.g., hole A18-118);
the Camp area, which connects West mineralization with the Central area (e.g., holes A18-130 & 134);
repetitions of mineralized limestone beneath lenses of phyllite at West Ayawilca which can host exceptional zinc grades (e.g., 10.4 metres grading 44% zinc, hole A18-129);
shallow zinc sulphide mineralization hosted by the overlying sandstone within a laterally extensive Upper Manto; and
extensions to the mineralization east of the Central and West areas (e.g., holes A18-148 & A18-150);

“Zinc mineralization still remains open along strike and down dip in several directions, while other prospective areas such as Zone 3 continue to offer additional potential.”


Read more at:
https://www.tinkaresources.com/news/tinka-reports-additional-step-out-and-infill-drill-holes-at-ayawilca-and-highlights-upper-manto-discovery

Tinka Drills 7.2 Metres Grading 22.7% Zinc And 5.7 Metres Grading 14.9% Zinc At Ayawilca


August 1st, 2018

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce assay results for eight step-out drill holes from the West, Central, Camp and East Ayawilca areas in the Company’s ongoing resource drill program at the Ayawilca project, Peru. In addition, one infill hole at South Ayawilca is reported.

Key highlights include:

- Two high-grade zinc intersections at the newly named Camp area (holes A18-130 & 134) in the ‘gap’ between West and Central Ayawilca include 5.7 metres grading 14.9% zinc. This intercept occurs within a repeated limestone unit underneath phyllite;

- At West Ayawilca, two follow-up holes to hole A18-129 (10.4 metres at 44.0% zinc, see press release dated June 26, 2018) have also intersected high-grade zinc mineralization beneath the known zinc resource.Zinc-rich veins hosted by phyllite in hole A18-132 (including *6.9 metres grading 20% zinc) are believed to be feeder structures which have tapped the source for the zinc mineralization and provide further potential for additional mineralization at depth;

- A positive infill hole at South Ayawilca (A18-133) confirms high-grade zinc replacement mineralization hosted by limestone and sandstone. This hole has improved the geological model in that area.

View maps and read more at:
https://www.tinkaresources.com/news/tinka-drills-7-2-metres-grading-22-7-zinc-and-5-7-metres-grading-14-9-zinc-at-ayawilca

Tinka CEO Announces Exercise of Stock Options

July 9th, 2018

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) announces that Dr. Graham Carman, President, CEO and director of Tinka, has exercised Tinka stock options (the “Stock Options”) to purchase 1,235,499 common shares of Tinka which were due to expire on July 11, 2018, with an exercise price of $0.35 per share, generating total proceeds to Tinka of C$432,425.In order to partially fund the exercise of the Stock Options, Dr. Carman has sold 400,000 Tinka shares in a private transaction intended to minimize the impact on the stock price. As a result of the exercise of the Stock Options and sale of the common shares, Dr. Carman has increased his overall investment and share ownership in the Company.

Dr. Carman plans to maintain his remaining holdings in Tinka for investment purposes and may, in the future, take such actions in respect to his holdings as he deems appropriate in light of circumstances then existing. Any additional acquisitions or dispositions by Dr. Carman will be reported in accordance with National Instrument 55 – 104.

The Company also announces it has cancelled a total of 500,000 incentive stock options that were originally granted on August 28, 2017, at an exercise price of $0.65 per common share, to a director of the Company. The cancelled stock options were voluntarily surrendered by the director for no consideration.

Read the original at:
https://www.tinkaresources.com/news/tinka-ceo-announces-exercise-of-stock-options-1

Thanks for posting stuff like that.







Au 5yr - Check !.....hmmmm

Zinc Drill Results Impress Investors
Contributed Opinion

Source: The Critical Investor for Streetwise Reports (7/2/18)

The exceptional zinc mineralization reported could indicate a feeder system, The Critical Investor reports.

Investors had to wait longer than expected for a big hit, but this week Tinka Resources Ltd. (TK:TSX.V; TLD:FSE; TKRFF:OTCPK) proved that looking for substantially more mineralization first instead of preparing a Preliminary Economic Assessment (PEA) is a viable strategy. The latest hole returned an amazing intercept of 10.4m grading 44.0% zinc (Zn) at West Ayawilca, and what is particularly interesting is that management seems to be verifying their new theory on Ayawilca structural controls of geology with this result. The share price reacted accordingly, with an impressive 36% jump and 2.7M shares traded volume on the day of the announcement:




Read more at:
https://www.streetwisereports.com/article/2018/07/02/explorer-in-peru-sets-up-for-an-interesting-h2.html?utm_source=delivra&utm_medium=email&utm_campaign=Resources%207-2-18&utm_id=35376457&dlv-ga-memberid=884007963


Read also:
https://www.tinkaresources.com/news/tinka-drills-10-4-metres-grading-44-0-zinc-in-new-discovery-of-exceptional-zinc-grade-at-ayawilca

https://www.tinkaresources.com/news/tinka-drills-32-metres-grading-9-6-zinc-within-a-wider-interval-of-107-metres-grading-6-8-zinc-in-ayawilca-step-out-hole

Tinka Drills 32 Metres Grading 9.6 % Zinc Within a Wider Interval of 107 Metres Grading 6.8 % Zinc in Ayawilca Step-Out Hole

May 24th, 2018

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce assay results for six holes from its ongoing resource step-out drill program at the Company’s 100%-owned Ayawilca project, central Peru. Three holes are reported from West Ayawilca area (holes A18-115, 116 & 118) and three from the Zone 3 area (A18-110, 113 & 119).

Drill hole A18-118 intersected 106.5 metres grading 6.8 % zinc (uncut) from 237.3 metres depth, one of the best intercepts ever drilled at West Ayawilca, approximately 50 metres north of the current zinc mineral resource.The footprint of high-grade zinc mineralization continues to grow.In addition, high-grade tin intercepts are reported from the Zone 3 area for the first time.Three rigs continue to drill step-out holes at West Ayawilca and at Zone 3, with other targets at South Ayawilca and Valley to be tested in coming weeks.


Read more (w/maps & tables) at:
https://www.tinkaresources.com/news/tinka-drills-32-metres-grading-9-6-zinc-within-a-wider-interval-of-107-metres-grading-6-8-zinc-in-ayawilca-step-out-hole

Tinka Drills 5 Metres Grading 20 % Zinc at Zone 3, Ayawilca Project

February 15th, 2018

Vancouver, Canada – Tinka Resources Limited (“Tinka” or the “Company”) (TSXV & BVL: TK) (OTCPK: TKRFF) is pleased to announce assay results for a further nine drill holes from the Company’s ongoing drill program at its 100%-owned Ayawilca zinc project, central Peru. All holes were testing for mineralization outside of the existing mineral resource boundaries (Ayawilca Inferred Mineral Resource estimate: 42.7 million tonnes grading 6.0% Zn, 0.2% lead, 17 g/t silver and 79 g/t indium; Nov 8, 2017). Four holes (107, 109, 110 and 111) were drilled at the new Zone 3 discovery area, part of a large geophysical target believed to be the northeastern extension of Ayawilca. An additional five holes were drilled at South, West and Central Ayawilca. Drilling of hole A18-112 at Zone 3 has now commenced, with a second drill rig expected to start up once the wet weather conditions improve in March.


Read more at:
https://www.tinkaresources.com/news/tinka-drills-5-metres-grading-20-zinc-at-zone-3-ayawilca-project

awfly quiet here! is this board dying?

NR link

https://www.tinkaresources.com/assets/docs/nr/2017-11-08_nr-en-hkajdety.pdf